52840 homekit adding to ios home failed

[William.wei]

hi support team,

i was tesing homekit ncs2.5.3, with iphone se ios18, pairing failed, and i use another two iphone 12, they all succeed.

i can't see why the ios would impact on pairing.

after i set CONFIG_HAP_LOG_LEVEL_INFO=y, i can see the difference as below:

when using default debug mode, i can see that the failure log shows:

i have no clue on this problem.

Fullscreen 7823.failed.txt Download

[10:22:58.909] [00:00:00.007,629] <inf> fs_nvs: 2 Sectors of 4096 bytes
[10:22:58.909] [00:00:00.007,659] <inf> fs_nvs: alloc wra: 0, fe8
[10:22:59.512] [00:00:00.007,659] <inf> fs_nvs: data wra: 0, 0
[10:23:00.084] [00:00:00.010,375] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:AccessoryServer] Configured HomeKit Data Stream for HAP with 32 concurrent streams.
[10:23:01.731] [00:00:00.010,803] <inf> pal_log: AppCreate
[10:23:02.263] [00:00:00.011,230] <inf> pal_log: DeviceDisableLED
[10:23:02.866] [00:00:00.013,336] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:UARP] UARPInitialize: Initializing libUARP.
[10:23:04.111] [00:00:00.013,793] <inf> pal_log: UARPRegisterFirmwareAsset: staged firmware version = 0.0.0.0
[10:23:05.156] [00:00:00.013,854] <err> pal_accessory_setup: No setup code found in key-value store.
[10:23:06.141] [00:00:00.014,190] <err> pal_log: fatal error - HAPPlatformAccessorySetupLoadSetupCode @ WEST_TOPDIR/homekit/adk/PAL/nRFConnect/HAPPlatformAccessorySetup.c:210
[10:23:07.869] [00:00:09.637,268] <err> pal_abort: Aborting from thread: €H
[10:23:08.605] [00:00:10.370,910] <err> os: r0/a1:  0x00000004  r1/a2:  0x00000040  r2/a3:  0x000000ae
[10:23:09.609] [00:00:11.375,793] <err> os: r3/a4:  0x00000000 r12/ip:  0x00000000 r14/lr:  0x0001f697
[10:23:10.613] [00:00:12.380,401] <err> os:  xpsr:  0x41000000
[10:23:11.215] [00:00:12.983,245] <err> os: s[ 0]:  0x00000000  s[ 1]:  0x00000000  s[ 2]:  0x00000000  s[ 3]:  0x00000000
[10:23:12.421] [00:00:14.189,392] <err> os: s[ 4]:  0x00000000  s[ 5]:  0x00000000  s[ 6]:  0x00000000  s[ 7]:  0x00000000
[10:23:13.627] [00:00:15.395,324] <err> os: s[ 8]:  0x00000000  s[ 9]:  0x00000000  s[10]:  0x00000000  s[11]:  0x00000000
[10:23:14.834] [00:00:00.007,080] <inf> fs_nvs: 2 Sectors of 4096 bytes
[10:23:18.441] [00:00:00.050,994] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000025 pairing.pairings] val 0000 / iid 0000
[10:23:18.482] --- 51 messages dropped ---
[10:23:18.482] [00:00:00.058,105] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000F2 supported-data-stream-transport-configuration] val 0000 / iid 0000
[10:23:18.499] [00:00:00.058,532] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000F3 setup-data-stream-transport] val 0000 / iid 0000
[10:23:18.521] [00:00:00.058,929] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000F4 version] val 0000 / iid 0000
[10:23:18.532] [00:00:00.059,326] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000F5 data-stream-hap-transport] val 0000 / iid 0000
[10:23:18.552] [00:00:00.059,753] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000F6 data-stream-hap-transport-interrupt] val 0000 / iid 0000
[10:23:18.572] [00:00:00.060,363] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000F00 firmware-update] (service)
[10:23:18.592] [00:00:00.060,760] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000F01 service-signature] val 0000 / iid 0000
[10:23:18.606] [00:00:00.061,157] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000F02 firmware-update-readiness] val 0000 / iid 0000
[10:23:18.632] [00:00:00.061,614] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000F03 firmware-update-status] val 0000 / iid 0000
[10:23:18.641] [00:00:00.062,194] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E0 battery] (service)
[10:23:18.662] [00:00:00.062,622] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E1 battery-level] val 0000 / iid 0000
[10:23:18.671] [00:00:00.063,049] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E2 charging-state] val 0000 / iid 0000
[10:23:18.690] [00:00:00.063,476] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E3 status-lo-batt] val 0000 / iid 0000
[10:23:18.713] [00:00:00.063,842] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E4 name] val 0000 / iid 0000
[10:23:18.732] [00:00:00.070,312] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] HAP BLE Regular Advertisement Format (Manufacturer Data). 
[10:23:18.740] -   LEN = 0x16 
[10:23:18.740] -   ADT = 0xFF 
[10:23:18.740] -  CoID = 0x004C 
[10:23:18.740] -    TY = 0x06 
[10:23:18.752] -   STL = 0x31 
[10:23:18.752] -    SF = 0x01 
[10:23:18.752] - DevID = 8A:70:08:F2:9B:EE 
[10:23:18.752] -  ACID = 6 
[10:23:18.752] -   GSN = 1 
[10:23:18.752] -    CN = 1 
[10:23:18.752] -    CV = 0x02
[10:23:18.752] -    SH = 0x6B42E585
[10:23:18.762] [00:00:00.070,678] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] ADV data: Active = 1, Interval = 20.000 ms.
[10:23:18.770] [00:00:00.070,953] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SR data.
[10:23:18.782] [00:00:00.073,394] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:AccessoryServer] Version Information:
[10:23:18.791] - ADK Version: "6.3" (e6e82026) - compatibility version 8
[10:23:18.797] - Extensions:
[10:23:18.797] 	- HomeKit Data Stream (HAP)
[10:23:18.811] 	- HAP over BLE
[10:23:18.811] - Platform Information:
[10:23:18.811] 	- Type: BLE
[10:23:18.811] 	- Compiler: "12.2.0"
[10:23:18.811] 	- Version: Internal (Sep 30 2024 10:21:44)
[10:23:18.811] 	- HAP Log:
[10:23:18.811] 		- Log Level: 3
[10:23:18.811] 	- HAP Testing is enabled
[10:23:18.821] 	- Available features:
[10:23:18.821] 		- Key-Value store
[10:23:18.821] 		- Accessory setup manager
[10:23:18.821] 		- BLE peripheral manager
[10:23:18.821] - Accessory Information:
[10:23:18.832] 	- Name             : Nordic Lock
[10:23:18.832] 	- Manufacturer     : Nordic Semiconductor
[10:23:18.832] 	- Model            : Lock1,1
[10:23:18.842] 	- Serial Number    : 000000001002
[10:23:18.842] 	- Product Data     : b3e691cc3020f889
[10:23:18.842] 	- Firmware version : 1.0.0
[10:23:18.852] 	- Hardware version : 1.0.0
[10:23:18.852] [00:00:00.090,270] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] New GSN: 2.
[10:23:18.861] [00:00:00.094,787] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] [0000000000000001 Nordic Lock] [0000000000000F02 firmware-update-readiness] Disconnected Event.
[10:23:18.881] [00:00:00.097,595] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] HAP BLE Regular Advertisement Format (Manufacturer Data). 
[10:23:18.891] -   LEN = 0x16 
[10:23:18.891] -   ADT = 0xFF 
[10:23:18.891] -  CoID = 0x004C 
[10:23:18.901] -    TY = 0x06 
[10:23:18.901] -   STL = 0x31 
[10:23:18.901] -    SF = 0x01 
[10:23:18.901] - DevID = 8A:70:08:F2:9B:EE 
[10:23:18.901] -  ACID = 6 
[10:23:18.901] -   GSN = 2 
[10:23:18.911] -    CN = 1 
[10:23:18.911] -    CV = 0x02
[10:23:18.911] -    SH = 0x6B42E585
[10:23:18.911] [00:00:00.097,930] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] ADV data: Active = 1, Interval = 20.000 ms.
[10:23:18.922] [00:00:00.098,205] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SR data.
[10:23:18.933] [00:00:00.099,914] <inf> pal_log: Entering run loop
[10:23:18.941] [00:00:00.100,524] <inf> pal_log: Accessory Server State did update: Running.
[10:23:18.948] [00:00:03.097,229] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] HAP BLE Regular Advertisement Format (Manufacturer Data). 
[10:23:22.487] -   LEN = 0x16 
[10:23:22.487] -   ADT = 0xFF 
[10:23:22.487] -  CoID = 0x004C 
[10:23:22.502] -    TY = 0x06 
[10:23:22.502] -   STL = 0x31 
[10:23:22.502] -    SF = 0x01 
[10:23:22.502] - DevID = 8A:70:08:F2:9B:EE 
[10:23:22.502] -  ACID = 6 
[10:23:22.502] -   GSN = 2 
[10:23:22.502] -    CN = 1 
[10:23:22.502] -    CV = 0x02
[10:23:22.502] -    SH = 0x6B42E585
[10:23:22.511] [00:00:03.097,564] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] ADV data: Active = 1, Interval = 20.000 ms.
[10:23:22.522] [00:00:03.097,869] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SR data.
[10:23:22.526] [00:00:12.639,617] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] HandleConnectedCentral(0x0000)
[10:23:32.031] [00:00:12.640,350] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SetDidIncrementGSNFlagDisconnectedState: Updating GSN increment flag from 1 to 0.
[10:23:32.041] [00:00:13.176,544] <wrn> bt_l2cap: Ignoring data for unknown channel ID 0x003a
[10:23:32.056] [00:00:15.487,121] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000024 pairing.features] Calling read handler.
[10:23:34.877] [00:00:17.047,119] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000022 pairing.pair-setup] Calling write handler.
[10:23:36.581] [00:00:17.048,431] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000022 pairing.pair-setup] Calling read handler.
[10:23:36.588] [00:00:18.667,205] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000022 pairing.pair-setup] Calling write handler.
[10:23:38.741] [00:00:18.668,273] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000022 pairing.pair-setup] Calling read handler.
[10:23:38.757] [00:00:20.497,131] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000022 pairing.pair-setup] Calling write handler.
[10:23:39.891] [00:00:20.528,198] <inf> pal_log: AppHandlePairingStateChange: state=0
[10:23:39.902] [00:00:20.528,503] <inf> pal_log: AppHandleControllerPairingStateChange: state=0
[10:23:39.911] [00:00:20.529,296] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000022 pairing.pair-setup] Calling read handler.
[10:23:39.921] [00:00:20.541,870] <inf> pal_log: Accessory Server State did update: Running.
[10:23:39.928] [00:00:26.347,076] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling write handler.
[10:23:45.741] [00:00:26.347,473] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling read handler.
[10:23:45.761] [00:00:26.527,069] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling write handler.
[10:23:45.781] [00:00:26.542,388] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling read handler.
[10:23:45.790] [00:00:26.544,219] <inf> pal_log: HAPPlatformThreadAddWakeLock() called
[10:23:45.799] [00:00:26.549,102] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:PairingPairVerify] Pair Verify procedure completed (pairing ID 0).
[10:23:45.814] [00:00:31.597,381] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000007 firmware.revision] Calling read handler.
[10:23:51.002] [00:00:31.717,346] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000003 manufacturer] Calling read handler.
[10:23:51.011] [00:00:31.837,341] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000004 model] Calling read handler.
[10:23:51.021] [00:00:31.957,366] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000006 serial-number] Calling read handler.
[10:23:51.041] [00:00:32.077,362] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [000000000000000A product-data] Calling read handler.
[10:23:51.061] [00:00:32.197,357] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000005 name] Calling read handler.
[10:23:51.068] [00:00:37.297,302] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] HandleDisconnectedCentral(0x0000)
[10:23:56.692] [00:00:37.300,872] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] HAP BLE Regular Advertisement Format (Manufacturer Data). 
[10:23:56.701] -   LEN = 0x16 
[10:23:56.701] -   ADT = 0xFF 
[10:23:56.701] -  CoID = 0x004C 
[10:23:56.712] -    TY = 0x06 
[10:23:56.712] -   STL = 0x31 
[10:23:56.712] -    SF = 0x00 
[10:23:56.712] - DevID = 8A:70:08:F2:9B:EE 
[10:23:56.712] -  ACID = 6 
[10:23:56.712] -   GSN = 2 
[10:23:56.712] -    CN = 1 
[10:23:56.712] -    CV = 0x02
[10:23:56.723] -    SH = 0x6B42E585
[10:23:56.723] [00:00:37.301,177] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] ADV data: Active = 1, Interval = 20.000 ms.
[10:23:56.732] [00:00:37.301,483] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SR data.
[10:23:56.738] [00:00:40.300,598] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] HAP BLE Regular Advertisement Format (Manufacturer Data). 
[10:23:59.688] -   LEN = 0x16 
[10:23:59.701] -   ADT = 0xFF 
[10:23:59.701] -  CoID = 0x004C 
[10:23:59.701] -    TY = 0x06 
[10:23:59.701] -   STL = 0x31 
[10:23:59.701] -    SF = 0x00 
[10:23:59.701] - DevID = 8A:70:08:F2:9B:EE 
[10:23:59.701] -  ACID = 6 
[10:23:59.701] -   GSN = 2 
[10:23:59.701] -    CN = 1 
[10:23:59.710] -    CV = 0x02
[10:23:59.710] -    SH = 0x6B42E585
[10:23:59.710] [00:00:40.300,933] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] ADV data: Active = 1, Interval = 417.500 ms.
[10:23:59.730] [00:00:40.301,239] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SR data.

Fullscreen 3603.success.txt Download

[10:23:59.730] [00:00:00.008,209] <inf> fs_nvs: 2 Sectors of 4096 bytes
[10:27:58.836] [00:00:00.008,239] <inf> fs_nvs: alloc wra: 0, fe8
[10:27:59.439] [00:00:00.007,080] <inf> fs_nvs: 2 Sectors of 4096 bytes
[10:28:01.981] [00:00:00.051,025] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000025 pairing.pairings] val 0000 / iid 0000
[10:28:02.022] --- 51 messages dropped ---
[10:28:02.022] [00:00:00.058,166] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000F2 supported-data-stream-transport-configuration] val 0000 / iid 0000
[10:28:02.037] [00:00:00.058,563] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000F3 setup-data-stream-transport] val 0000 / iid 0000
[10:28:02.061] [00:00:00.058,959] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000F4 version] val 0000 / iid 0000
[10:28:02.082] [00:00:00.059,387] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000F5 data-stream-hap-transport] val 0000 / iid 0000
[10:28:02.092] [00:00:00.059,814] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000F6 data-stream-hap-transport-interrupt] val 0000 / iid 0000
[10:28:02.111] [00:00:00.060,394] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000F00 firmware-update] (service)
[10:28:02.132] [00:00:00.060,791] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000F01 service-signature] val 0000 / iid 0000
[10:28:02.142] [00:00:00.061,218] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000F02 firmware-update-readiness] val 0000 / iid 0000
[10:28:02.162] [00:00:00.061,645] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000F03 firmware-update-status] val 0000 / iid 0000
[10:28:02.182] [00:00:00.062,255] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E0 battery] (service)
[10:28:02.202] [00:00:00.062,683] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E1 battery-level] val 0000 / iid 0000
[10:28:02.211] [00:00:00.063,079] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E2 charging-state] val 0000 / iid 0000
[10:28:02.230] [00:00:00.063,507] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E3 status-lo-batt] val 0000 / iid 0000
[10:28:02.251] [00:00:00.063,873] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E4 name] val 0000 / iid 0000
[10:28:02.271] [00:00:00.070,343] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] HAP BLE Regular Advertisement Format (Manufacturer Data). 
[10:28:02.282] -   LEN = 0x16 
[10:28:02.282] -   ADT = 0xFF 
[10:28:02.282] -  CoID = 0x004C 
[10:28:02.282] -    TY = 0x06 
[10:28:02.282] -   STL = 0x31 -    SF = 0x01 
[10:28:02.291] - DevID = EF:B4:85:CD:36:0B 
[10:28:02.291] -  ACID = 6 
[10:28:02.291] -   GSN = 1 
[10:28:02.291] -    CN = 1 
[10:28:02.291] -    CV = 0x02
[10:28:02.291] -    SH = 0xBC6228A9
[10:28:02.302] [00:00:00.070,709] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] ADV data: Active = 1, Interval = 20.000 ms.
[10:28:02.311] [00:00:00.070,983] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SR data.
[10:28:02.321] [00:00:00.073,425] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:AccessoryServer] Version Information:
[10:28:02.331] - ADK Version: "6.3" (e6e82026) - compatibility version 8
[10:28:02.352] - Extensions:
[10:28:02.352] 	- HomeKit Data Stream (HAP)
[10:28:02.352] 	- HAP over BLE
[10:28:02.352] - Platform Information:
[10:28:02.352] 	- Type: BLE
[10:28:02.352] 	- Compiler: "12.2.0"
[10:28:02.352] 	- Version: Internal (Sep 30 2024 10:21:44)
[10:28:02.352] 	- HAP Log:
[10:28:02.352] 		- Log Level: 3
[10:28:02.352] 	- HAP Testing is enabled
[10:28:02.362] 	- Available features:
[10:28:02.362] 		- Key-Value store
[10:28:02.362] 		- Accessory setup manager
[10:28:02.362] 		- BLE peripheral manager
[10:28:02.362] - Accessory Information:
[10:28:02.369] 	- Name             : Nordic Lock
[10:28:02.369] 	- Manufacturer     : Nordic Semiconductor
[10:28:02.381] 	- Model            : Lock1,1
[10:28:02.381] 	- Serial Number    : 000000001002
[10:28:02.381] 	- Product Data     : b3e691cc3020f889
[10:28:02.381] 	- Firmware version : 1.0.0
[10:28:02.392] 	- Hardware version : 1.0.0
[10:28:02.392] [00:00:00.085,449] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] New GSN: 2.
[10:28:02.396] [00:00:00.089,965] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] [0000000000000001 Nordic Lock] [0000000000000F02 firmware-update-readiness] Disconnected Event.
[10:28:02.422] [00:00:00.092,742] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] HAP BLE Regular Advertisement Format (Manufacturer Data). 
[10:28:02.432] -   LEN = 0x16 
[10:28:02.432] -   ADT = 0xFF 
[10:28:02.432] -  CoID = 0x004C 
[10:28:02.442] -    TY = 0x06 
[10:28:02.442] -   STL = 0x31 
[10:28:02.442] -    SF = 0x01 
[10:28:02.442] - DevID = EF:B4:85:CD:36:0B 
[10:28:02.442] -  ACID = 6 
[10:28:02.442] -   GSN = 2 
[10:28:02.442] -    CN = 1 
[10:28:02.451] -    CV = 0x02
[10:28:02.451] -    SH = 0xBC6228A9
[10:28:02.451] [00:00:00.093,078] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] ADV data: Active = 1, Interval = 20.000 ms.
[10:28:02.462] [00:00:00.093,383] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SR data.
[10:28:02.472] [00:00:00.095,092] <inf> pal_log: Entering run loop
[10:28:02.477] [00:00:00.095,672] <inf> pal_log: Accessory Server State did update: Running.
[10:28:02.484] [00:00:03.092,437] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] HAP BLE Regular Advertisement Format (Manufacturer Data). 
[10:28:06.021] -   LEN = 0x16 
[10:28:06.021] -   ADT = 0xFF 
[10:28:06.021] -  CoID = 0x004C 
[10:28:06.031] -    TY = 0x06 
[10:28:06.031] -   STL = 0x31 
[10:28:06.031] -    SF = 0x01 
[10:28:06.031] - DevID = EF:B4:85:CD:36:0B 
[10:28:06.031] -  ACID = 6 
[10:28:06.031] -   GSN = 2 
[10:28:06.040] -    CN = 1 
[10:28:06.040] -    CV = 0x02
[10:28:06.040] -    SH = 0xBC6228A9
[10:28:06.040] [00:00:03.092,773] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] ADV data: Active = 1, Interval = 20.000 ms.
[10:28:06.052] [00:00:03.093,078] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SR data.
[10:28:06.060] [00:00:10.869,171] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] HandleConnectedCentral(0x0000)
[10:28:13.801] [00:00:10.869,903] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SetDidIncrementGSNFlagDisconnectedState: Updating GSN increment flag from 1 to 0.
[10:28:13.819] [00:00:11.399,017] <wrn> bt_l2cap: Ignoring data for unknown channel ID 0x003a
[10:28:13.819] [00:00:13.679,595] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000024 pairing.features] Calling read handler.
[10:28:16.607] [00:00:14.879,577] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000022 pairing.pair-setup] Calling write handler.
[10:28:17.941] [00:00:14.880,889] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000022 pairing.pair-setup] Calling read handler.
[10:28:17.958] [00:00:16.499,664] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000022 pairing.pair-setup] Calling write handler.
[10:28:20.112] [00:00:16.500,762] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000022 pairing.pair-setup] Calling read handler.
[10:28:20.122] [00:00:18.389,556] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000022 pairing.pair-setup] Calling write handler.
[10:28:21.322] [00:00:18.420,623] <inf> pal_log: AppHandlePairingStateChange: state=0
[10:28:21.332] [00:00:18.420,928] <inf> pal_log: AppHandleControllerPairingStateChange: state=0
[10:28:21.339] [00:00:18.421,722] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000022 pairing.pair-setup] Calling read handler.
[10:28:21.352] [00:00:18.434,326] <inf> pal_log: Accessory Server State did update: Running.
[10:28:21.360] [00:00:24.329,467] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling write handler.
[10:28:27.262] [00:00:24.329,864] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling read handler.
[10:28:27.281] [00:00:24.479,461] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling write handler.
[10:28:27.302] [00:00:24.494,781] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling read handler.
[10:28:27.321] [00:00:24.496,612] <inf> pal_log: HAPPlatformThreadAddWakeLock() called
[10:28:27.321] [00:00:24.501,495] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:PairingPairVerify] Pair Verify procedure completed (pairing ID 0).
[10:28:27.333] [00:00:29.669,738] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000007 firmware.revision] Calling read handler.
[10:28:32.600] [00:00:29.789,703] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000003 manufacturer] Calling read handler.
[10:28:32.618] [00:00:29.909,698] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000004 model] Calling read handler.
[10:28:32.640] [00:00:30.029,724] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000006 serial-number] Calling read handler.
[10:28:32.651] [00:00:30.149,719] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [000000000000000A product-data] Calling read handler.
[10:28:32.671] [00:00:30.269,714] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000005 name] Calling read handler.
[10:28:32.691] [00:00:30.749,298] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000002004 lock-mechanism.target-state] Enabling events.
[10:28:32.707] [00:00:30.809,295] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000002003 lock-mechanism.current-state] Enabling events.
[10:28:33.621] [00:00:30.869,293] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E3 status-lo-batt] Enabling events.
[10:28:33.633] [00:00:31.079,589] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000005 name] Calling read handler.
[10:28:33.650] [00:00:31.199,707] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000007 firmware.revision] Calling read handler.
[10:28:33.672] [00:00:31.319,702] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000002002 name] Calling read handler.
[10:28:33.682] [00:00:31.439,697] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000E4 name] Calling read handler.
[10:28:33.701] [00:00:31.559,692] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000002004 lock-mechanism.target-state] Calling read handler.
[10:28:33.718] [00:00:31.559,967] <inf> pal_log: HandleLockMechanismLockTargetStateRead
[10:28:33.731] [00:00:31.560,272] <inf> pal_log: HandleLockMechanismLockTargetStateRead: LockTargetState_Unsecured
[10:28:33.743] [00:00:31.679,687] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000002003 lock-mechanism.current-state] Calling read handler.
[10:28:33.752] [00:00:31.679,992] <inf> pal_log: HandleLockMechanismLockCurrentStateRead
[10:28:33.762] [00:00:31.680,267] <inf> pal_log: HandleLockMechanismLockCurrentStateRead: LockCurrentState_Unsecured
[10:28:33.769] [00:00:31.799,713] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000E3 status-lo-batt] Calling read handler.
[10:28:33.792] [00:00:31.799,987] <inf> pal_log: HandleBatteryStatusLowRead: Normal
[10:28:33.796] [00:00:31.919,677] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000002002 name] Calling read handler.
[10:28:34.571] [00:00:32.039,672] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000005 name] Calling read handler.
[10:28:34.591] [00:00:32.159,698] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000E4 name] Calling read handler.
[10:28:34.601] [00:00:32.219,268] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000A05 heart-beat] Enabling events.
[10:28:34.621] [00:00:32.279,266] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000A05 heart-beat] Enabling events.
[10:28:34.637] [00:00:32.339,294] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000F03 firmware-update-status] Enabling events.
[10:28:34.661] [00:00:32.399,291] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000F02 firmware-update-readiness] Enabling events.
[10:28:34.681] [00:00:32.459,289] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E1 battery-level] Enabling events.
[10:28:34.691] [00:00:32.519,287] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E2 charging-state] Enabling events.
[10:28:34.711] [00:00:32.639,678] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000A05 heart-beat] Calling read handler.
[10:28:34.730] [00:00:32.640,014] <inf> pal_log: HAPHandleAccessoryRuntimeInformationHeartBeatRead Controller read Heart Beat as 1
[10:28:34.742] [00:00:32.759,704] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000F03 firmware-update-status] Calling read handler.
[10:28:34.761] [00:00:32.759,735] <inf> dfu: FirmwareUpdateGetAccessoryState
[10:28:34.761] [00:00:32.879,699] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000F02 firmware-update-readiness] Calling read handler.
[10:28:35.441] [00:00:32.879,730] <inf> dfu: FirmwareUpdateGetAccessoryState
[10:28:35.451] [00:00:32.999,694] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000E1 battery-level] Calling read handler.
[10:28:35.471] [00:00:32.999,969] <inf> pal_log: HandleBatteryLevelRead
[10:28:35.471] [00:00:33.149,688] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000E2 charging-state] Calling read handler.
[10:28:35.487] [00:00:33.149,963] <inf> pal_log: HandleBatteryChargingStateRead
[10:28:35.501] [00:00:33.269,683] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000F4 version] Calling read handler.
[10:28:35.509] [00:00:33.389,678] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000F2 supported-data-stream-transport-configuration] Calling read handler.
[10:28:35.541] [00:00:33.509,674] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000002004 lock-mechanism.target-state] Calling read handler.
[10:28:35.552] [00:00:33.509,948] <inf> pal_log: HandleLockMechanismLockTargetStateRead
[10:28:35.562] [00:00:33.510,253] <inf> pal_log: HandleLockMechanismLockTargetStateRead: LockTargetState_Unsecured
[10:28:35.566] [00:00:33.659,667] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000002003 lock-mechanism.current-state] Calling read handler.
[10:28:36.592] [00:00:33.659,973] <inf> pal_log: HandleLockMechanismLockCurrentStateRead
[10:28:36.601] [00:00:33.660,247] <inf> pal_log: HandleLockMechanismLockCurrentStateRead: LockCurrentState_Unsecured
[10:28:36.611] [00:00:33.779,693] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000E3 status-lo-batt] Calling read handler.
[10:28:36.632] [00:00:33.779,968] <inf> pal_log: HandleBatteryStatusLowRead: Normal
[10:28:36.632] [00:00:33.899,658] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000E1 battery-level] Calling read handler.
[10:28:36.652] [00:00:33.899,932] <inf> pal_log: HandleBatteryLevelRead
[10:28:36.657] [00:00:36.809,631] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000002002 name] Calling read handler.
[10:28:39.741] [00:00:36.929,626] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000005 name] Calling read handler.
[10:28:39.756] [00:00:37.289,642] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000E4 name] Calling read handler.
[10:28:39.769] [00:00:42.599,487] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] HandleDisconnectedCentral(0x0000)
[10:28:45.530] [00:00:42.603,057] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] HAP BLE Regular Advertisement Format (Manufacturer Data). 
[10:28:45.541] -   LEN = 0x16 
[10:28:45.541] -   ADT = 0xFF 
[10:28:45.555] -  CoID = 0x004C 
[10:28:45.561] -    TY = 0x06 
[10:28:45.561] -   STL = 0x31 
[10:28:45.561] -    SF = 0x00 
[10:28:45.561] - DevID = EF:B4:85:CD:36:0B 
[10:28:45.561] -  ACID = 6 
[10:28:45.561] -   GSN = 2 
[10:28:45.561] -    CN = 1 
[10:28:45.561] -    CV = 0x02
[10:28:45.561] -    SH = 0xBC6228A9
[10:28:45.561] [00:00:42.603,393] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] ADV data: Active = 1, Interval = 20.000 ms.
[10:28:45.570] [00:00:42.603,668] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SR data.
[10:28:45.581] [00:00:42.711,700] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] HandleConnectedCentral(0x0000)
[10:28:45.597] [00:00:43.239,318] <wrn> bt_l2cap: Ignoring data for unknown channel ID 0x003a
[10:28:45.606] [00:00:51.429,931] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling write handler.
[10:28:53.871] [00:00:51.430,358] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling read handler.
[10:28:53.881] [00:00:51.579,956] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling write handler.
[10:28:53.902] [00:00:51.581,176] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:PairingPairVerify] Pair Verify M3: Pairing not found.
[10:28:53.911] [00:00:51.581,542] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling read handler.
[10:28:53.931] [00:00:51.729,949] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling write handler.
[10:28:53.949] [00:00:51.730,346] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling read handler.
[10:28:53.970] [00:00:51.909,973] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling write handler.
[10:28:53.991] [00:00:51.925,689] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000023 pairing.pair-verify] Calling read handler.
[10:28:54.001] [00:00:51.927,520] <inf> pal_log: HAPPlatformThreadAddWakeLock() called
[10:28:54.011] [00:00:51.932,403] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:PairingPairVerify] Pair Verify procedure completed (pairing ID 0).
[10:28:54.021] [00:00:57.280,303] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000007 firmware.revision] Calling read handler.
[10:28:59.870] [00:00:57.429,901] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000A05 heart-beat] Enabling events.
[10:28:59.891] [00:00:57.519,897] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000002004 lock-mechanism.target-state] Enabling events.
[10:28:59.911] [00:00:57.579,895] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000002003 lock-mechanism.current-state] Enabling events.
[10:28:59.933] [00:00:57.639,892] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E3 status-lo-batt] Enabling events.
[10:28:59.943] [00:00:57.699,890] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000002004 lock-mechanism.target-state] Enabling events.
[10:28:59.963] [00:00:57.759,887] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000002003 lock-mechanism.current-state] Enabling events.
[10:28:59.980] [00:00:57.819,885] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000F03 firmware-update-status] Enabling events.
[10:29:00.003] [00:00:57.879,882] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [0000000000000F02 firmware-update-readiness] Enabling events.
[10:29:00.021] [00:00:57.939,910] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E2 charging-state] Enabling events.
[10:29:00.032] [00:00:57.999,908] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E3 status-lo-batt] Enabling events.
[10:29:00.052] [00:00:58.059,906] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] [0000000000000001 Nordic Lock] [00000000000000E1 battery-level] Enabling events.
[10:29:00.073] [00:00:58.120,300] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000005 name] Calling read handler.
[10:29:00.080] [00:00:58.240,295] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000007 firmware.revision] Calling read handler.
[10:29:00.921] [00:00:58.360,290] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000002002 name] Calling read handler.
[10:29:00.939] [00:00:58.480,316] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000E4 name] Calling read handler.
[10:29:00.961] [00:00:58.750,335] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000A05 heart-beat] Calling read handler.
[10:29:00.981] [00:00:58.750,640] <inf> pal_log: HAPHandleAccessoryRuntimeInformationHeartBeatRead Controller read Heart Beat as 1
[10:29:00.993] [00:00:58.870,330] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000002004 lock-mechanism.target-state] Calling read handler.
[10:29:01.001] [00:00:58.870,605] <inf> pal_log: HandleLockMechanismLockTargetStateRead
[10:29:01.011] [00:00:58.870,910] <inf> pal_log: HandleLockMechanismLockTargetStateRead: LockTargetState_Unsecured
[10:29:01.022] [00:00:58.990,325] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000002003 lock-mechanism.current-state] Calling read handler.
[10:29:01.041] [00:00:58.990,631] <inf> pal_log: HandleLockMechanismLockCurrentStateRead
[10:29:01.049] [00:00:58.990,905] <inf> pal_log: HandleLockMechanismLockCurrentStateRead: LockCurrentState_Unsecured
[10:29:01.061] [00:00:59.110,351] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000E3 status-lo-batt] Calling read handler.
[10:29:01.076] [00:00:59.110,626] <inf> pal_log: HandleBatteryStatusLowRead: Normal
[10:29:01.086] [00:00:59.230,346] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000F03 firmware-update-status] Calling read handler.
[10:29:01.802] [00:00:59.230,377] <inf> dfu: FirmwareUpdateGetAccessoryState
[10:29:01.802] [00:00:59.380,340] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000F02 firmware-update-readiness] Calling read handler.
[10:29:01.831] [00:00:59.380,371] <inf> dfu: FirmwareUpdateGetAccessoryState
[10:29:01.831] [00:00:59.500,335] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000E2 charging-state] Calling read handler.
[10:29:01.847] [00:00:59.500,610] <inf> pal_log: HandleBatteryChargingStateRead
[10:29:01.861] [00:00:59.620,330] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [00000000000000E1 battery-level] Calling read handler.
[10:29:01.871] [00:00:59.620,605] <inf> pal_log: HandleBatteryLevelRead
[10:29:01.881] [00:00:59.860,382] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000025 pairing.pairings] Calling write handler.
[10:29:01.902] [00:00:59.862,335] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000025 pairing.pairings] Calling read handler.
[10:29:01.910] [00:01:00.100,372] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000025 pairing.pairings] Calling write handler.
[10:29:03.031] [00:01:00.102,355] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:Characteristic] [0000000000000001 Nordic Lock] [0000000000000025 pairing.pairings] Calling read handler.
[10:29:03.051] [00:01:00.106,292] <inf> pal_log: AppHandlePairingStateChange: state=1
[10:29:03.061] [00:01:00.106,597] <inf> pal_log: AppHandleControllerPairingStateChange: state=1
[10:29:03.066] [00:01:00.111,358] <inf> pal_log: Accessory Server State did update: Running.
[10:29:03.081] [00:01:00.190,643] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEPeripheralManager] HandleDisconnectedCentral(0x0000)
[10:29:03.091] [00:01:00.194,091] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] HAP BLE Regular Advertisement Format (Manufacturer Data). 
[10:29:03.101] -   LEN = 0x16 
[10:29:03.101] -   ADT = 0xFF 
[10:29:03.101] -  CoID = 0x004C 
[10:29:03.101] -    TY = 0x06 
[10:29:03.111] -   STL = 0x31 
[10:29:03.111] -    SF = 0x01 
[10:29:03.111] - DevID = EF:B4:85:CD:36:0B 
[10:29:03.111] -  ACID = 6 
[10:29:03.111] -   GSN = 2 
[10:29:03.111] -    CN = 1 
[10:29:03.111] -    CV = 0x02
[10:29:03.122] -    SH = 0xBC6228A9
[10:29:03.122] [00:01:00.194,396] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] ADV data: Active = 1, Interval = 20.000 ms.
[10:29:03.131] [00:01:00.194,702] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SR data.
[10:29:03.138] [00:01:03.193,756] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] HAP BLE Regular Advertisement Format (Manufacturer Data). 
[10:29:06.121] -   LEN = 0x16 
[10:29:06.132] -   ADT = 0xFF 
[10:29:06.132] -  CoID = 0x004C 
[10:29:06.132] -    TY = 0x06 
[10:29:06.132] -   STL = 0x31 
[10:29:06.132] -    SF = 0x01 
[10:29:06.132] - DevID = EF:B4:85:CD:36:0B 
[10:29:06.132] -  ACID = 6 
[10:29:06.143] -   GSN = 2 
[10:29:06.143] -    CN = 1 
[10:29:06.143] -    CV = 0x02
[10:29:06.143] -    SH = 0xBC6228A9
[10:29:06.143] [00:01:03.194,091] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] ADV data: Active = 1, Interval = 417.500 ms.
[10:29:06.161] [00:01:03.194,396] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] SR data.
[10:29:06.167] [00:11:00.106,201] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:AccessoryServer] Accessory server shutting down.
[10:39:03.052] [00:11:00.106,506] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:BLEAccessoryServer] Stopping advertisement - Server is shutting down.
[10:39:03.063] [00:11:00.107,452] <inf> pal_log: didStopBLE: 1, didStopThread: 1
[10:39:03.071] [00:11:00.107,788] <inf> pal_log: [€H] [com.apple.mfi.HomeKit.Core:AccessoryServer] Accessory server shutdown completed.
[10:39:03.079] [00:11:00.108,062] <inf> pal_log: Accessory Server State did update: Idle.
[10:39:03.086] 

Regards,

William.

[Amanda Hsieh]

Hi, 

i was tesing homekit ncs2.5.3, with iphone se ios18, pairing failed, and i use another two iphone 12, they all succeed.

Does it only fail with iOS18?

What iOS version is running on the other two iPhone 12?

Could you try to erase the DK before programming and then connect with the iPhone running iOS18?

Regards,
Amanda H.

[William.wei]

hi Amanda,

i rememberd previous version of iphone SE also pairing failed, after that, i updated iphone SE to ios18.

so i don't believe this is ios problem but iphone SE problem i believe.

Amanda Hsieh said:

Could you try to erase the DK before programming and then connect with the iPhone running iOS18?

i have recovered 840DK before provision.

nrfjprog --program "C:\Users\William\Documents\WeChat Files\wxid_9o8yd89o5r2f22\FileStorage\File\2024-10\merged.hex" --recover

nrfjprog -f nrf52 --sectorerase --program _generated/provisioned_PLMQ_360-05-054.hex --reset

by the way, i used ble by default not thread.

i also tried good 840dk from colleague.

and there is no such kind of problem with iphone16 ios18 and iphone12 ios17.6.1

here is the problem screen with iphone SE:

curiously, no one had such problem before?

Regards,

William.

[Amanda Hsieh]

Could you try to turn off and on the BLE on the iPhone SE?

Does it also happen to other iPhone SE?

[William.wei]

Sorry Amanda,

we only have one in our office, can you try? i can share hex and haptool hex and qrcode

[Amanda Hsieh]

Hi, 

I don't have an iPhone SE. 

Did you try to turn off and on the BLE on the iPhone SE and erase the kit before programming to test again? Ensure both sides are clean for testing.