i have ZSWatch complete hardware by jackob and kempy and the link is provided below and using the vscode (nrf connect) to code in it in my case the debugger by segger technology having stm32f072cbt6 so the problem which i'm facing right now is that it is not getting detecting by my laptop and also not by the vscode nrf connect extension....i have installed the segger latest driver also but facing the same problem is there anyone who have use this?
these are the errors encounter during flash and as you can see that in connected devices it is not showing up the board also and in this case i'm using the nrf52832 development kit to code in nrf5240
Hi
I'm sorry, but can you confirm you are using an nR52832 DK as the programmer here, and if so, please confirm it is connected to the ZSWatch device as in the image below and that they are both powered with 3.0V.
I assume the project is building without any errors on your end and you only see this errors when trying to flash the program onto the external device, correct? It seems like the debugger/programmer is having trouble contacting the external device.
Best regards,
Simon
i have also tried these connections from the manual
