Possibility to read the current timer value

[mthomas]

Hi

Is there any way to read the current value of the nPM1300 timer?

This would allow to keep track of time while the CPU is not running or rebooting (in the absence of an external RTC)

Thanks

[helsing]

Edit: Sorry, no, this is not possible :) See comment from Dan.
Yes, you can read the current value of the nPM1300 timer by accessing the TIMERHIBYTE, TIMERMIDBYTE, and TIMERLOBYTE registers. These registers represent the most significant byte, middle byte, and least significant byte of the timer respectively.

TIMERHIBYTE: Address offset 0x8
TIMERMIDBYTE: Address offset 0x9
TIMERLOBYTE: Address offset 0xA

You will find more details on TIMER in the nPM1300 documentation:
https://docs.nordicsemi.com/bundle/ps_npm1300/page/chapters/core_components/timer/doc/frontpage.html

[mthomas]

Hi, I've already tried to read that register.

The value does not change while the timer is running (at least in General Purpose mode) :

npmx_timer_t *timer = npmx_timer_get(&m_npmx, 0);
const npmx_timer_config_t timer_cfg = {
    .prescaler = NPMX_TIMER_PRESCALER_SLOW,
    .mode = NPMX_TIMER_MODE_GENERAL_PURPOSE,
    .compare_value = 0xFFFFFF,
};
npmx_timer_config_set(timer, &timer_cfg);
npmx_timer_task_trigger(timer, NPMX_TIMER_TASK_ENABLE);

nrf_delay_ms(100);

uint8_t timer_buffer[3] = {0};
npmx_backend_register_read(m_npmx.p_backend, NPMX_REG_TO_ADDR(NPM_TIMER->TIMERHIBYTE), timer_buffer, 3);

uint32_t timer_value = (
    (timer_buffer[0] << 16) |
    (timer_buffer[1] <<  8) |
    (timer_buffer[2] <<  0)
);
NRF_LOG_INFO("Timer value: 0x%x", timer_value);

Output is: Timer value: 0xFFFFFF

[dacr]

Hi,

There is no possibility to read the current value of the timer. You can only know when the timer expires.

All the best,

Dan

[mthomas]

Thanks for the reply

It would be nice to consider adding this in future releases

[dacr]

I will relay your feedback to the relevant teams.