Possible bug in nrf52832 LFCLK

[KLWP0101]

[Bug Report] Possible bug in nRF52832 engineering release B. When LF XTAL oscillator is started, no event is generated.

NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_Xtal;
NRF_CLOCK->TASKS_LFCLKSTART = 1;
while (NRF_CLOCK->EVENTS_LFCLKSTARTED == 0)   { };      // STUCK HERE FOREVER!!

The oscillator is actually started but no event is generated.

[Susheel Nuguru]

updated with code that worked (29.01.2016)

Maybe it needs one clk cycle or two between selection of the clock source and starting the lfclk, try this below

NRF_CLOCK->EVENTS_LFCLKSTARTED = 0;
NRF_CLOCK->LFCLKSRC = (CLOCK_LFCLKSRC_SRC_Xtal << CLOCK_LFCLKSRC_SRC_Pos);
__DSB();     //<-- This will wait until write buffers are emptied.
NRF_CLOCK->TASKS_LFCLKSTART = 1;
while (NRF_CLOCK->EVENTS_LFCLKSTARTED == 0)
{
}

i do not have engineering sample B to test it with. If the above code works, then i should ask someone here to test out why the event missed.

[RK]

This sounds a little bit like the write buffer scenario mentioned in the porting notes. I wonder if the write to LFCLKSRC isn't completing before the write to LFCLKSTART, or basically they end up completing together and so the source isn't really set and the clock event doesn't get sent.

You could try reading NRF_CLOCK->LFCLKSRC after writing it to force the write buffer to clear.

I think we're going to see this write-may-need-read scenario catching people out, it caught me out last week!