Possible bug in nrf52832 LFCLK

[KLWP0101]

[Bug Report] Possible bug in nRF52832 engineering release B. When LF XTAL oscillator is started, no event is generated.

NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_Xtal;
NRF_CLOCK->TASKS_LFCLKSTART = 1;
while (NRF_CLOCK->EVENTS_LFCLKSTARTED == 0)   { };      // STUCK HERE FOREVER!!

The oscillator is actually started but no event is generated.

[Susheel Nuguru]

updated with code that worked (29.01.2016)

Maybe it needs one clk cycle or two between selection of the clock source and starting the lfclk, try this below

NRF_CLOCK->EVENTS_LFCLKSTARTED = 0;
NRF_CLOCK->LFCLKSRC = (CLOCK_LFCLKSRC_SRC_Xtal << CLOCK_LFCLKSRC_SRC_Pos);
__DSB();     //<-- This will wait until write buffers are emptied.
NRF_CLOCK->TASKS_LFCLKSTART = 1;
while (NRF_CLOCK->EVENTS_LFCLKSTARTED == 0)
{
}

i do not have engineering sample B to test it with. If the above code works, then i should ask someone here to test out why the event missed.

[RK]

Should have linked to it, it's this one. It's a great redux of the major differences between the nRF51 and nRF52 processors.

Hopefully now the original poster can test out a few of these solutions and see if it points to the issue, which is quite odd.