I am using a LattePanda 3 Delta running an Ubuntu server OS (x86) headlessly. I am using a RS-232 cable to obtain the modem trace from my custom board, which uses an nRF9160.
When I run nRF Connect for Desktop (with GUI) on my Windows machine, I am able to obtain a trace easily.
Versions:
nrfutil==7.12.0
nrfutil trace==3.0.0
On my Ubuntu machine, the trace runs without issue (see output 1 below) UNTIL IT REACHES approx. 13KB, at which it displays an error message (see output 2 below).
Command:sudo nrfutil trace lte --input-serialport "/dev/ttyUSB0" --output-pcapng ~/nrfutil/logs/out3.pcapng
Output 1:Saving trace to /home/dwhite/nrfutil/logs/out3.pcapng (2768 bytes)
Output 2:
Error: Failed to decode modem trace: failed to fill whole buffer (error code 100)
I repeated this 3 times. The .pcapng file sizes were 13836 B, 13228 B, 14224 B
I then attempted to perform a modem trace and output a raw .bin file. The same issue appeared, but the files reached approximately 125 KB each.
Command:sudo nrfutil trace lte --input-serialport "/dev/ttyUSB0" --output-raw ~/nrfutil/logs/out3.bin
Output 1:Saving trace to /home/dwhite/nrfutil/logs/out3.bin (15360 bytes)
Output 2:
Error: Failed to decode modem trace: failed to fill whole buffer (error code 100)
The .bin file sizes were 112640 B, 137216 B, 126976 B
Why is this happening, and how can I fix this issue?
