Onomondo static profile with nrf9161 custom board not working

[simon884]

Hi,

I'm working with a custom board build with an nrf9161, I've created my board from nrf9161dk board (change some pin and defintion), I'm able to flash and build? I can use my custom led, my i2c bus, so I thought my custom board is well defined.

Right now I'm trying to use onomondo softsim profile, but ùy softsim never connect. To debug I've tried to do this here but same result not working. Just to know I have tried my source code with nordic nrf9160dk and it's working I'm able to have lte event and I can see my sim connected on onomondo, so the bug is not on my code...

Here is AT command I have tried :

[00:00*** Booting nRF Connect SDK v3.5.99-ncs1-1 ***
[00:00:00.326,324] <inf> nrf_modem: Initializing libmodem 2.6.1-lte-11b6ed4846a8
[00:00:00.570,983] <inf> nrf_modem: RPC ready
[00:00:00.619,964] <inf> gcg: Waiting for LTE connect event.

> AT
OK
> AT+CEREG?
+CEREG: 5,4
OK
+CEREG: 2,"E29D","09891B07",7
[00:03:30.427,307] <inf> gcg: LTE cell changed: Cell ID: 159980295, Tracking area: 58013 //always got only this event only, and look strange this event take always some time to come..

> AT+CEREG?
+CEREG: 5,2,"E29D","09891B07",7  // should have +CEREG: 1,5 from onomondo tutorial
OK

> AT+CESQ
+CESQ: 99,99,255,255,16,58
OK

> AT+CEREG=1
OK
> AT+COPS?
+COPS: 0
OK
> AT+CGDCONT=1,"IP","onomondo"
OK
> AT+CGACT=1,1
ERROR

> AT+CGMR
mfw_nrf91x1_2.0.1
OK

I can upload my board definition, tell me. Don't understand why it's working on 9160dk and not on my board, maybe bad board definition, I hope it's not an hardware issue with my custom board

Thanks for help

[Asbjørn]

Hello Simon,

1. Your code works well when it is running on the nRF9160DK. Is it waiting for some event somewhere that is available on the kit but not on your custom board?
2. The are you using log or debugging the device at the same time? What sort of steps are you reading out from the log as being completed? Are you seeing error messages there?
3. A common challenge with new custom boards are often component and layout mismatch that compromise RF performance. Is the custom board packed into something? Are you able to share details about your custom board?

Best regards

Asbjørn

[simon884]

Thanks Asbjørn 

1. Yes my code works well on nRF9160 DK. I can reach Onomondo, I can see my sim connected. On my custom board I have an issue I think about softsim, I get only this  LTE event after nothing

[00:03:30.427,307] <inf> gcg: LTE cell changed: Cell ID: 159980295, Tracking area: 58013

I also have this event on my DK board the difference is on my DK I got other event after. and this event come faster on my DK board.

2. For debbuging I tried to do this from Onomondo. As I said above all comands works exept

AT+CEREG=1

I got an ERROR, and the result coming from

AT+CEREG?

returns

+CEREG: 5,2,"E29D","09891B07",7

and if i believe the Onomondo tutorial I should have the result +CEREG: 1,5.

3. for my custom board, I was 98% inspired by the circuit dojo feather nrf9160, for the modem and LTE it's totally the same. The only difference is the nrf9161. To create my custom board I copied the nrf9161DK and change some pin definition.

circuitdojo

EDIT: after boot if I try this AT command AT+CEREG? return


+CEREG: 5,4
OK

Onomondo said :

 
The “x” in the x,4 or x,5 part indicates the URC status and is not important for this step.

With Onomondo SIMs, you will always be roaming, which is why the response x,5 is always expected.


But me, I always got 4 never 5 it's look like my nrf never roaming.
If I'm waiting LTE_LC_EVT_CELL_UPDATE 

+CEREG: 2,"D2FD","09891C10",7
[00:03:26.265,625] <inf> GCG_DNV: LTE cell changed: Cell ID: 159980560, Tracking

And redo AT+CEREG? I got
+CEREG: 5,2,"D2FD","09891C10",7
OK

[simon884]

Hi,

I've tried AT+CEREG=5 before AT+CGDCONT=1,"IP","onomondo" without change, same error when I try AT+CGACT=1,1.

My application is like the onomodo softsim static profil example here.

The difference beetwen the code on my custom board and nrf9160dk is LTE event, for example here is the output on my DK (nrf9160dk_nrf9160_ns) with exactly the same code :

*** Booting nRF Connect SDK v3.5.99-ncs1-1 ***
[00:00:00.350,646] <inf> GCG_DNV: Hello DNV!
[00:00:00.639,923] <inf> GCG_DNV: Waiting for LTE connect event.

+CEREG: 2,"9682","01628305",7
[00:00:10.022,705] <inf> GCG_DNV: LTE cell changed: Cell ID: 23233285, Tracking area: 38530
+CSCON: 1
[00:00:10.088,348] <inf> GCG_DNV: RRC mode: Connected

+CEREG: 5,"9682","01628305",7,,,"11100000","11100000"
[00:00:15.484,436] <inf> GCG_DNV: Network registration status: Connected - roaming
[00:00:15.484,619] <inf> GCG_DNV: LTE connected!

[00:00:15.485,504] <inf> GCG_DNV: PSM parameter update: TAU: 3240, Active time: -1
[00:00:15.488,739] <err> GCG_DNV: Opened device with return code -8
+CSCON: 0
[00:00:18.961,669] <inf> GCG_DNV: RRC mode: Idle

As you can see the fisrt LTE event come quickly and I'm connected to LTE. And now the same code running on my custom board: (first and only one LTE event and take some time to come compare to DK)

*** Booting nRF Connect SDK v3.5.99-ncs1-1 ***
[00:00:00.327,423] <inf> GCG_DNV: Hello DNV!
[00:00:00.327,453] <inf> nrf_modem: Initializing libmodem 2.6.1-lte-11b6ed4846a8
[00:00:00.584,747] <inf> nrf_modem: RPC ready
[00:00:00.648,284] <inf> GCG_DNV: Waiting for LTE connect event.

+CEREG: 2,"9682","01628305",7
[00:03:27.493,621] <inf> GCG_DNV: LTE cell changed: Cell ID: 23233285, Tracking area: 38530

The only difference I think is the modem firmware. On my custom board

> AT+CGMR
mfw_nrf91x1_2.0.1
OK

And on DK board

> AT+CGMR

mfw_nrf9160_1.3.5
OK

I would like to add modem trace but when I try to add CONFIG_NRF_MODEM_MOB_TRACE=y to my prj.conf I have an error when I build

Existing handler 0x85cbb, new handler 0x85cbb
Has IRQ_CONNECT or IRQ_DIRECT_CONNECT accidentally been invoked on the same irq multiple times?

Maybe I have an issue with my custom board definition devicetree

EDIT: just test with the last nrf modem fw for nrf9161 version 2.0.2 same result

EDIT 2: ok I can build with CONFIG_NRF_MODEM_LIB_TRACE it was a conflict with CONFIG_NRF_MODEM_LIB_TRACE, but I'm not able to get some trace with cellular monitor, if I start the process I got :

17:05:25.369

Tried to send AT command to device, but no serial port is open

[Asbjørn]

Hi Simon,

So you have one nRF9160 DK and one nRF9161 SiP on your custom board with different mfw versions. 

The modem trace documention:

https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/libraries/modem/nrf_modem_lib/nrf_modem_lib_trace.html

You were able to add the modem trace service, but how did you connect the trace output pins to the terminal? You can send AT commands directly to the modem FW, but the trace traffic raises an error? Is the error message you pasted into your previous reply the only output from the modem trace you get? Do you see or receive anything else from the modem trave interface?

Are you building the onomondo application for the right device? If it works for nRF9160 are you building a different application for the custom board that contains the nRF9161? 

The Onomondo softsim_static_profil works with the nRFG9160DK, it is the same application you are trying to run?

Best regards

Asbjørn

[simon884]

Asbjørn said:

So you have one nRF9160 DK and one nRF9161 SiP on your custom board with different mfw versions

Yes one nrf9160 DK board and one custom board with nrf9161 sip (inspired by circuit dojo feather nrf9160 design)

Asbjørn said:

service, but how did you connect the trace output pins to the terminal? You can send AT commands directly to the modem FW, but the trace traffic raises an error?

I don’t know if I’m right but to activate the traces I only have to add the CONFIG_NRF_MODEM_LIB_TRACE, And output will come on uart? Should I do something else ? I’m using vscode and nrf plugin. My custom board look like very similar to circuit dojo feather nrf9160 (same uart pin, I2c,…) So for my uart I have the same wiring, using cp21 and USB port with pin P0.05/06 for UART on SIP.

Yes I can send AT commands to my custom board over serial monitor. So if I sent AT via UART my board return OK.

Asbjørn said:

Are you building the onomondo application for the right device?

yes I’m building for my custom board ans another build for DK board. All build are made on ns board version. 

Asbjørn said:

The Onomondo softsim_static_profil works with the nRFG9160DK, it is the same application you are trying to run?

Yes exactly

[Asbjørn]

Are you enabling the trace in the build configuration in NCS? See the "Snippets" section of the screen shot.

With this and the UART connected to a terminal, you don't see any output on a serial terminal on either the DK nor your custom boards?

Best regards

Asbjørn

[simon884]

Thanks Asbjørn 

Asbjørn said:

Are you enabling the trace in the build configuration in NCS?

I haven't add the snippet sorry. But now I got an error when I'm trying to compile for my custom board :

devicetree error: 'pinctrl-0' is marked as required in 'properties:' in /opt/nordic/ncs/v2.5.0/zephyr/dts/bindings/serial/nordic,nrf-uarte.yaml, but does not appear in <Node /soc/peripheral@40000000/uart@9000 in '/opt/nordic/ncs/v2.5.0/zephyr/misc/empty_file.c'>

However I've defined pinctrl-0 in my common dtsi file and declared uart0 in pinctrl file

&pinctrl {
	uart0_default: uart0_default {
		group1 {
			psels = <NRF_PSEL(UART_TX, 0, 6)>,
				<NRF_PSEL(UART_RX, 0, 5)>;
		};
	};

	uart0_sleep: uart0_sleep {
		group1 {
			psels = <NRF_PSEL(UART_TX, 0, 6)>,
				<NRF_PSEL(UART_RX, 0, 5)>;
			low-power-enable;
		};
	};

	i2c1_default: i2c1_default {
		group1 {
			psels = <NRF_PSEL(TWIM_SDA, 0, 26)>,
				<NRF_PSEL(TWIM_SCL, 0, 27)>;
		};
	};

	i2c1_sleep: i2c1_sleep {
		group1 {
			psels = <NRF_PSEL(TWIM_SDA, 0, 26)>,
				<NRF_PSEL(TWIM_SCL, 0, 27)>;
			low-power-enable;
		};
	};

	spi3_default: spi3_default {
		group1 {
			psels = <NRF_PSEL(SPIM_SCK, 0, 11)>,
				<NRF_PSEL(SPIM_MOSI, 0, 9)>,
				<NRF_PSEL(SPIM_MISO, 0, 28)>;
		};
	};

	spi3_sleep: spi3_sleep {
		group1 {
			psels = <NRF_PSEL(SPIM_SCK, 0, 11)>,
				<NRF_PSEL(SPIM_MOSI, 0, 9)>,
				<NRF_PSEL(SPIM_MISO, 0, 28)>;
			low-power-enable;
		};
	};
}

&uart0 {
	status = "okay";
	current-speed = <115200>;
	pinctrl-0 = <&uart0_default>;
	pinctrl-1 = <&uart0_sleep>;
	pinctrl-names = "default", "sleep";
};

I'm not an expert with devicetree and zephyr custom board zephyr, should I've missed a configuration somewhere ? Can I use uart0 for trace because if I look in nrf91-modem-trace-uart/modem-trace-uart.overlay I see

/* Enable uart1 for tracing. */
&uart1 {
	status = "okay";
	current-speed = < 1000000 >;
};

/ {
	chosen {
		nordic,modem-trace-uart = &uart1;
	};
};

EDIT ; ok I've added an overlay to use uart0 and the snippet for trace modem. Now I got this error

[00:00:01.209,625] <inf> nrf_modem: Initializing libmodem 2.6.1-lte-11b6ed4846a8
[00:00:01.468,566] <inf> nrf_modem: RPC ready
[00:00:01.468,933] <err> modem_trace_backend: Cannot set callback: -88
[00:00:01.468,933] <err> nrf_modem_lib_trace: trace_backend: init failed with err: -14
[00:00:01.468,963] <err> nrf_modem_lib_trace: Failed to initialize trace backend, err: -14
[00:00:01.582,458] <inf> GCG_DNV: Waiting for LTE connect event.

[Asbjørn]

Hi Simon,

there seems to be something not initialized correctly with the trace. The screen shots you have attached seems to indicate you configure the pins for uart0, i2c and spi3. Hower you use uart1 for the trace, would you be able to add the config for uart1 as well before you enable the trace. There's a difference between app trace and modem trace in the output.

In the same go, would you be able to share a file containing the print from project configurationm build log and build log from VS code?

Are you able to get some other project working on the both kit and custom board? Like for example the asset tracking example? You would have to build to versions of it. One for the 9160 and one for the 9161. Just to try a different FW and see if it starts up on both?

Best regards

Asbjørn

[simon884]

Hi Asbjørn 

Asbjørn said:

The screen shots you have attached seems to indicate you configure the pins for uart0, i2c and spi3.

Yes that's right. But I've change the modem-trace-uart.overlay file to change uart1 to uart0, I have to use uart0 I don't have uart1 on my custom board.

Print log of building for my custom board

Building hello_world
west build --build-dir /Users/Sim/hello_world/build_1 /Users/Sim/hello_world --pristine --board geo_Sim_nrf9161_ns -- -DNCS_TOOLCHAIN_VERSION=NONE -DSNIPPET=nrf91-modem-trace-uart -DBOARD_ROOT=/Users/Sim/Documents/workspace_dev/GCG_DNV/my_board_nrf

-- west build: generating a build system
Loading Zephyr default modules (Zephyr base).
-- Application: /Users/Sim/hello_world
-- CMake version: 3.20.5
-- Found Python3: /opt/nordic/ncs/toolchains/20d68df7e5/opt/[email protected]/bin/python3.9 (found suitable version "3.9.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /Users/Sim/Library/Caches/zephyr
-- Zephyr version: 3.5.99 (/opt/nordic/ncs/v2.5.0/zephyr)
-- Found west (found suitable version "1.1.0", minimum required is "0.14.0")
-- Board: geo_Sim_nrf9161_ns, Revision: 0.9.0
-- Snippet(s): nrf91-modem-trace-uart
-- Found host-tools: zephyr 0.16.1 (/opt/nordic/ncs/toolchains/20d68df7e5/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.16.1 (/opt/nordic/ncs/toolchains/20d68df7e5/opt/zephyr-sdk)
-- Found Dtc: /opt/nordic/ncs/toolchains/20d68df7e5/bin/dtc (found suitable version "1.6.1", minimum required is "1.4.6") 
-- Found BOARD.dts: /Users/Sim/Documents/workspace_dev/GCG_DNV/my_board_nrf/boards/arm/geo_Sim_nrf9161/geo_Sim_nrf9161_ns.dts
-- Found devicetree overlay: /Users/Sim/hello_world/geo_Sim_nrf9161_ns.overlay
-- Found devicetree overlay: /opt/nordic/ncs/v2.5.0/nrf/snippets/nrf91-modem-trace-uart/modem-trace-uart.overlay
-- Generated zephyr.dts: /Users/Sim/hello_world/build_1/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /Users/Sim/hello_world/build_1/zephyr/include/generated/devicetree_generated.h
-- Including generated dts.cmake file: /Users/Sim/hello_world/build_1/zephyr/dts.cmake

warning: UART_1_ASYNC (defined at drivers/serial/Kconfig.nrfx_uart_instance:14) was assigned the
value 'y' but got the value 'n'. Check these unsatisfied dependencies: HAS_HW_NRF_UARTE1 (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_UART_1_ASYNC and/or look up UART_1_ASYNC in
the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.


warning: Experimental symbol TFM_EXPERIMENTAL is enabled.

Parsing /opt/nordic/ncs/v2.5.0/zephyr/Kconfig
Loaded configuration '/Users/Sim/Documents/workspace_dev/GCG_DNV/my_board_nrf/boards/arm/geo_Sim_nrf9161/geo_Sim_nrf9161_ns_defconfig'
Merged configuration '/Users/Sim/hello_world/prj.conf'
Merged configuration '/Users/Sim/hello_world/softsim_overlay.conf'
Merged configuration '/Users/Sim/hello_world/w25q01_overlay.conf'
Merged configuration '/opt/nordic/ncs/v2.5.0/nrf/snippets/nrf91-modem-trace-uart/overlay-modem-trace-uart.conf'
Configuration saved to '/Users/Sim/hello_world/build_1/zephyr/.config'
Kconfig header saved to '/Users/Sim/hello_world/build_1/zephyr/include/generated/autoconf.h'
-- Found GnuLd: /opt/nordic/ncs/toolchains/20d68df7e5/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd (found version "2.38") 
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: /opt/nordic/ncs/toolchains/20d68df7e5/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc
-- Using ccache: /opt/nordic/ncs/toolchains/20d68df7e5/bin/ccache
CMake Warning at /opt/nordic/ncs/v2.5.0/zephyr/CMakeLists.txt:1957 (message):
  __ASSERT() statements are globally ENABLED


Dropping partition 'tfm_ps' since its size is 0.
-- Configuring done
-- Generating done
-- Build files have been written to: /Users/Sim/hello_world/build_1
-- west build: building application
[1/331] Preparing syscall dependency handling

[6/331] Generating include/generated/version.h
-- Zephyr version: 3.5.99 (/opt/nordic/ncs/v2.5.0/zephyr), build: v3.5.99-ncs1-1
[11/331] Generating ../../tfm/CMakeCache.txt
CMake Warning at cmake/version.cmake:22 (message):
  Actual TF-M version is not available from Git repository.  Settled to
  v2.0.0
Call Stack (most recent call first):
  CMakeLists.txt:22 (include)


-- Found Git: /opt/nordic/ncs/toolchains/20d68df7e5/bin/git (found version "2.37.3") 
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: /opt/nordic/ncs/toolchains/20d68df7e5/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc
-- Found Python3: /opt/nordic/ncs/toolchains/20d68df7e5/opt/[email protected]/bin/python3.9 (found version "3.9.6") found components: Interpreter 
CMake Deprecation Warning at /opt/nordic/ncs/v2.5.0/zephyr/cmake/modules/FindDeprecated.cmake:121 (message):
  'PYTHON_PREFER' variable is deprecated.  Please use Python3_EXECUTABLE
  instead.
Call Stack (most recent call first):
  /opt/nordic/ncs/v2.5.0/zephyr/cmake/modules/python.cmake:16 (find_package)
  /opt/nordic/ncs/v2.5.0/zephyr/cmake/modules/user_cache.cmake:30 (include)
  /opt/nordic/ncs/v2.5.0/zephyr/cmake/modules/extensions.cmake:5 (include)
  /opt/nordic/ncs/v2.5.0/nrf/subsys/nrf_security/tfm/CMakeLists.txt:38 (include)


-- Found Python3: /opt/nordic/ncs/toolchains/20d68df7e5/opt/[email protected]/bin/python3.9 (found suitable version "3.9.6", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /Users/Sim/Library/Caches/zephyr
-- Configuring done
-- Generating done
CMake Warning:
  Manually-specified variables were not used by the project:

    CRYPTO_CIPHER_MODULE_ENABLED
    CRYPTO_HASH_MODULE_ENABLED
    CRYPTO_KEY_DERIVATION_MODULE_ENABLED
    CRYPTO_KEY_MODULE_ENABLED
    CRYPTO_MAC_MODULE_ENABLED
    CRYPTO_RNG_MODULE_ENABLED
    MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE
    PYTHON_PREFER


-- Build files have been written to: /Users/Sim/hello_world/build_1/tfm
[191/195] Linking C executable bin/tfm_s.axf
Memory region         Used Size  Region Size  %age Used
           FLASH:       97664 B       320 KB     29.80%
             RAM:       51788 B        88 KB     57.47%
[18/331] Performing install step for 'tfm'
-- Install configuration: "Debug"
----- Installing platform NS -----
[207/331] Building C object CMakeFiles/app.dir/src/main.c.obj
../src/main.c: In function 'main':
../src/main.c:343:19: warning: 'ret' may be used uninitialized [-Wmaybe-uninitialized]
  343 |                 if(ret < 0)
      |                   ^
../src/main.c:247:13: note: 'ret' was declared here
  247 |         int ret;
      |             ^~~
[260/331] Building C object modules/softsim/lib/CMakeFiles/..__modules__lib__onomondo-softsim__lib.dir/nrf_softsim.c.obj
In file included from /opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/include/onomondo/softsim/utils.h:6,
                 from /opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/nrf_softsim.c:14:
/opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/include/onomondo/softsim/mem.h:9:9: note: '#pragma message: Using custom heap'
    9 | #pragma message "Using custom heap"
      |         ^~~~~~~
/opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/nrf_softsim.c: In function 'onomondo_init':
/opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/nrf_softsim.c:69:9: note: '#pragma message: Using static profile. Only for development!'
   69 | #pragma message "Using static profile. Only for development!"
      |         ^~~~~~~
[261/331] Building C object modules/softsim/lib/CMakeFiles/..__modules__lib__onomondo-softsim__lib.dir/ss_fs.c.obj
In file included from /opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/include/onomondo/softsim/utils.h:6,
                 from /opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/ss_fs.c:13:
/opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/include/onomondo/softsim/mem.h:9:9: note: '#pragma message: Using custom heap'
    9 | #pragma message "Using custom heap"
      |         ^~~~~~~
[264/331] Building C object modules/softsim/lib/CMakeFiles/..__modules__lib__onomondo-softsim__lib.dir/ss_provision.c.obj
In file included from /opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/ss_provision.c:8:
/opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/include/onomondo/softsim/mem.h:9:9: note: '#pragma message: Using custom heap'
    9 | #pragma message "Using custom heap"
      |         ^~~~~~~
[268/331] Building C object modules/softsim/lib/CMakeFiles/..__modules__lib__onomondo-softsim__lib.dir/ss_heap.c.obj
In file included from /opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/ss_heap.c:2:
/opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/include/onomondo/softsim/mem.h:9:9: note: '#pragma message: Using custom heap'
    9 | #pragma message "Using custom heap"
      |         ^~~~~~~
[269/331] Building C object modules/softsim/lib/CMakeFiles/..__modules__lib__onomondo-softsim__lib.dir/ss_crypto.c.obj
In file included from /opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/ss_crypto.c:12:
/opt/nordic/ncs/v2.5.0/modules/lib/onomondo-softsim/lib/include/onomondo/softsim/mem.h:9:9: note: '#pragma message: Using custom heap'
    9 | #pragma message "Using custom heap"
      |         ^~~~~~~
[329/331] Linking C executable zephyr/zephyr.elf
Memory region         Used Size  Region Size  %age Used
           FLASH:      214544 B       576 KB     36.37%
             RAM:       71072 B     137880 B     51.55%
        IDT_LIST:          0 GB        32 KB      0.00%
[331/331] Generating zephyr/merged.hex
 *  Le terminal sera réutilisé par les tâches, appuyez sur une touche pour le fermer. 

Don't know if it's usefull but here my prj.conf

### Onomondo SoftSIM ###
CONFIG_SOFTSIM_DEBUG=y
CONFIG_SOFTSIM_LOG_LEVEL_ERR=y
CONFIG_SOFTSIM_BUNDLE_TEMPLATE_HEX=y
CONFIG_SOFTSIM_STATIC_PROFILE_ENABLE=y
# GSMA TS.48 USIM profile (standard test profile) replace with actual Onomondo profile
CONFIG_SOFTSIM_STATIC_PROFILE="my°profile_here"
### Onomondo SoftSIM ###

# config gps
CONFIG_UBXLIB=n
CONFIG_GPIO=y
CONFIG_I2C=n
CONFIG_SPI=n

# config Log
CONFIG_LOG=y
CONFIG_DEBUG=y
CONFIG_ASSERT=y

CONFIG_MINIMAL_LIBC=y
CONFIG_MINIMAL_LIBC_MALLOC=n

# Modem Configurations
CONFIG_NRF_MODEM_LIB=y
CONFIG_NRF_MODEM_LOG=n

# NET Configurations
CONFIG_NETWORKING=y
CONFIG_NET_SOCKETS=y
CONFIG_NET_NATIVE=n
CONFIG_NET_SOCKETS_OFFLOAD=y
CONFIG_NET_SOCKETS_POSIX_NAMES=y

# # LTE Configurations
CONFIG_LTE_LINK_CONTROL=y

# # AT host library
CONFIG_SERIAL=y
CONFIG_NRF_MODEM_LIB_TRACE=y
CONFIG_AT_HOST_LIBRARY=y
CONFIG_UART_INTERRUPT_DRIVEN=y

# # Reduce the size of TF-M by disabling the PS
CONFIG_TFM_PARTITION_PROTECTED_STORAGE=n
CONFIG_PSA_CRYPTO_DRIVER_CC3XX=n