nRF5340: SMP Server with external XIP sample with image revert possibility

[Ladivin]

Hi all,

by default, the "nRF5340: SMP Server with external XIP" sample does not support reverting images in case DFU was not successful. In other words, it does not swap slots, it just copies the new image over the old one. This is caused by the config CONFIG_BOOT_UPGRADE_ONLY being set to "y". 

I had no luck building the sample with CONFIG_BOOT_UPGRADE_ONLY=n. I had a look into C:\ncs\v2.6.1\nrf\modules\mcuboot\nrf5340_exip_image.conf and I can see that this config is set to "y" there. Also there is a note stating that this config is needed to make simultaneous multi image update possible. Does this mean that the only way to achieve multi image DFU for nrf5340 with part of code in QSPI flash is to have this config set to y? Or to make the question more generic - is there a way to have the posibility of reverting images after update in this multi image + QSPI XIP scenario? 

Thanks!

[AHaug]

Hi,

Does this mean that the only way to achieve multi image DFU for nrf5340 with part of code in QSPI flash is to have this config set to y

Yes, this is correct

Kind regards,
Andreas

 

[Ladivin]

Hi Andreas,

thank you for the quick answer! I have a follow up question.

I can see that this sample (nRF5340: SMP Server with external XIP) got some updates in the new version of the SDK (2.8.0). If I understand it correctly, if I wanted to update only two images (app + QSPI flash and NOT net core), I can use other modes, right? I can tell because the sysbuild_no_network_core_directxip.conf contains SB_CONFIG_MCUBOOT_MODE_DIRECT_XIP=y. 

In other words, the requirement to have CONFIG_BOOT_UPGRADE_ONLY=y applies only if all of the three images are to be updatable? 

Thanks, 

Ladivin

[AHaug]

Hi Ladivin,

Yes, based on the release notes it's true that this overlay (and support) has been added https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/releases/release-notes-2.8.0.html#samples 

Ladivin said:

In other words, the requirement to have CONFIG_BOOT_UPGRADE_ONLY=y applies only if all of the three images are to be updatable? 

Also correct. From the note you mention, reversion of netcore image is not supported in simultaneous update of multiple images:

• "CONFIG_BOOT_UPGRADE_ONLY - The simultaneous update of multiple images does not support network core image reversion, so you need to disable application image reversion."

Ladivin said:

If I understand it correctly, if I wanted to update only two images (app + QSPI flash and NOT net core), I can use other modes, right?

Could you expand on what you mean by "other modes"?

Kind regards;
Andreas

[Ladivin]

Hi Andreas,

again many thanks for your response. 

Sorry for not being clear - by "other modes" I mean the choices that are defined in <NCS_PATH>\bootloader\mcuboot\boot\zephyr\Kconfig under choice BOOT_IMAGE_UPGRADE_MODE - e.g. the direct XIP mode that is newly available in the sample or swap using scratch etc. 

Thanks,

Ladivin 

[AHaug]

https://github.com/nrfconnect/sdk-mcuboot/blob/bcdf6e24493a0c3de7c5f3a126a6b4075b2ad088/boot/zephyr/Kconfig#L413-L423

Ah, I now understand what you mean. As far as I can see this should be possible, yes. But I've not verified by running and testing this myself, so I recommend you validate mixing the configurations/modes with updating the various cores/xip partition combinations thoroughly and if you find anything not working as you and I have discussed already let me know and we'll have a closer look if this is behaviour or should be a feature request

Kind regards,
Andreas

[Ladivin]

Thanks for your reply, I'll have a look into the various modes later one. 

Just a final question - so there's really no way of updating all three images with the revert posibility? Even if we e.g. do it one by one? I'm mean any way - even something really hacky? 

I'm sorry I'm asking pretty much the same thing from a different angle, but I need to be 100 % sure before I present this to my colleagues. 

Thanks,

Ladivin