the file: thingy53_nrf5340_cpuapp.conf in v2.6.0/bootloader/mcuboot/boot/zephyr/boards

[danny0007]

Hi Community,

I made a custom board based on thingy53, created a similar custom board file folder.

The application code can be compiled correctly with the original thingy53 board, but If I try to compile the same code with the custom board, it will be not successful.
Then I compared the output from the compile, If I use my custom board the step with  v2.6.0/bootloader/mcuboot/boot/zephyr/boards/thingy53_nrf5340_cpuapp.conf is missing.

after add a similar file for my custom board under the same folder, it works, the compile is successful. 

My question are: 

1. what's the function of this file?

2. because the folder is a offcial folder from the software, how can I import this file into my project folder, so I can manage it in my project?

Best regards

Danny 

[Menon]

Hello,

There seems to be a technical glitch with Devzone when the network connection is slow or unstable. This issue usually resolves itself after some time. If the problem persists, please provide me with a screenshot while you are on the "Insert" tab. I will report this internally and work towards finding a solution.

Additionally, please try uploading the log as a zip file to see if that works.

Kind regards,
Abhijith

[danny0007]

thingy53_and_custom_build.zip

Hi Abhijith. 

in the zip file you will find two output from the build process on two different boards.

Best regards

Danny