• State Not Answered
  • Replies 6 replies
  • Subscribers 71 subscribers
  • Views 153 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 337295
Options

nRF9160 Modem transition to Idle state

Abdullah Javed

Hi,
we are using custom PCB with nRF9160.

we are writing a firmware for radio test lab. We are using LTE asynchronous in our firmware and LTE-M mode. We want the modem to stay connected to network for at-least 30 minutes. But we are facing an issue, where the modem goes to idle state after some time, and goes to connected state again, and then repeats this behavior as you can see in the image below. We believe this is due to the Network Inactivity timer

Our goal is to ensure that the modem remains connected to the network without entering the idle state during the test, maintaining a continuous connection. We do not want the modem to transition into idle mode due to inactivity.

We would like to handle this behavior at the firmware level. Is it possible to configure the modem to stay connected at all times and avoid transitioning into the idle state? If so, could you provide guidance on how we can modify the firmware or settings to achieve this? Is there any configuration or function in LTE Link controller API?

Thank you for your support.

Best regards,
Abdullah











Parents
  • 0

    Hi Abdullah,

    This blog specifies that it is the network who determines RRC Inactivity Timer value and UE cannot negotiate that. 

    Is any activity allowed for these 30 minutes? Does your firmware allow that UE receives any messages or send any data to stay connected?

    Do you use eDRX or PSM?

    Best regards,
    Dejan

  • 0 in reply to dejans

    Hello  ,
    I hope you will be doing great.

    First we are not allowed to have any activity as the test lab use their own sim cards and network so we can not have any internet activity. so is it possible to stay connected to the network for 30 minutes without going to idle state or disconnected state?

    Can we achieve this on the firmware side? if so how?


    is this possible on the network side? if so how?

    This is the Requirement for the Radio Test:

    Radio Test: 1 Device with communication to the base station. No need for the scale functionalty

    Best Regards,
    Akbar shah

Reply
  • 0 in reply to dejans

    Hello  ,
    I hope you will be doing great.

    First we are not allowed to have any activity as the test lab use their own sim cards and network so we can not have any internet activity. so is it possible to stay connected to the network for 30 minutes without going to idle state or disconnected state?

    Can we achieve this on the firmware side? if so how?


    is this possible on the network side? if so how?

    This is the Requirement for the Radio Test:

    Radio Test: 1 Device with communication to the base station. No need for the scale functionalty

    Best Regards,
    Akbar shah

Children
No Data
Related