Why are RADIO_MODE_MODE_Ble_LR125Kbit ， RADIO_MODE_MODE_Ble_LR500Kbit and RADIO_MODE_MODE_Ieee802154_250Kbit not supported in the ESB routines? If I want to use these configurations, how should I configure them, and which parameters should I pay attention to?
#define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
#define RADIO_MODE_MODE_Msk (0xFUL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
#define RADIO_MODE_MODE_Nrf_1Mbit (0UL) /*!< 1 Mbit/s Nordic proprietary radio mode */
#define RADIO_MODE_MODE_Nrf_2Mbit (1UL) /*!< 2 Mbit/s Nordic proprietary radio mode */
#define RADIO_MODE_MODE_Nrf_250Kbit (2UL) /*!< Deprecated enumerator - 250 kbit/s Nordic proprietary radio mode */
#define RADIO_MODE_MODE_Ble_1Mbit (3UL) /*!< 1 Mbit/s Bluetooth Low Energy */
#define RADIO_MODE_MODE_Ble_2Mbit (4UL) /*!< 2 Mbit/s Bluetooth Low Energy */
#define RADIO_MODE_MODE_Ble_LR125Kbit (5UL) /* < Long range 125 kbps TX, 125 kbps and 500 kbps RX */
#define RADIO_MODE_MODE_Ble_LR500Kbit (6UL) /*< Long range 500 kbps TX, 125 kbps and 500 kbps RX */
#define RADIO_MODE_MODE_Ieee802154_250Kbit (15UL) /*!< IEEE 802.15.4-2006 250 kbps */
/**@brief Enhanced ShockBurst bitrate modes. */
typedef enum {
NRF_ESB_BITRATE_2MBPS = RADIO_MODE_MODE_Nrf_2Mbit, /**< 2 Mb radio mode. */
NRF_ESB_BITRATE_1MBPS = RADIO_MODE_MODE_Nrf_1Mbit, /**< 1 Mb radio mode. */
#if defined(RADIO_MODE_MODE_Nrf_250Kbit)
NRF_ESB_BITRATE_250KBPS = RADIO_MODE_MODE_Nrf_250Kbit, /**< 250 Kb radio mode. */
#endif //!( defined(NRF52840_XXAA) || defined(NRF52810_XXAA) || defined(NRF52811_XXAA) )
NRF_ESB_BITRATE_1MBPS_BLE = RADIO_MODE_MODE_Ble_1Mbit, /**< 1 Mb radio mode using @e Bluetooth low energy radio parameters. */
#if defined(RADIO_MODE_MODE_Ble_2Mbit)
NRF_ESB_BITRATE_2MBPS_BLE = RADIO_MODE_MODE_Ble_2Mbit /**< 2 Mb radio mode using @e Bluetooth low energy radio parameters. */
#endif
} nrf_esb_bitrate_t;
