• State Not Answered
  • Replies 22 replies
  • Subscribers 70 subscribers
  • Views 303 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 337838
Options

Trouble migrating from NCS 2.6 to 2.8

BrianW

Due to issues with the wifi stack, I have to move my project from 2.6 to 2.8.

I downloaded the new tools set (toolchains\cf2149caf2) and new nordic connect version 2.8.0 as per

https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/installation/updating.html

I read the migration guides for 2.7 and 2.8, and the 'using sysbuild for multi-image builds guides:

https://docs.nordicsemi.com/bundle/ncs-latest/page/zephyr/build/sysbuild/index.html#sysbuild

https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/migration/migration_sysbuild.html

https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/migration/migration_guide_2.8.html

Mostly this gave me a headache.

I created sysbuild.conf (at the root where I run west - is this right?), and filled in the stuff from the migration guides for mcuboot and nrf70 support.
# MCU boot config now handled by sysbuild
SB_CONFIG_BOOTLOADER_MCUBOOT=y
SB_CONFIG_MCUBOOT_BOOTLOADER_MODE_SWAP_WITHOUT_SCRATCH=y
SB_CONFIG_MCUBOOT_GENERATE_UNSIGNED_IMAGE=y

SB_CONFIG_NETCORE_HCI_IPC=y
SB_CONFIG_NETCORE_APP_UPDATE=y
SB_CONFIG_BOOT_SIGNATURE_TYPE_ECDSA_P256=y
SB_CONFIG_BOOT_SIGNATURE_KEY_FILE="/work/dev/if-device-nrf53/keys/bootloader_priv-ecdsa256.pem"
#CONFIG_MCUBOOT_SIGNATURE_KEY_FILE="/work/dev/if-device-nrf53/keys/bootloader_priv-ecdsa256.pem"

SB_CONFIG_MCUBOOT_BOOTLOADER_MODE_SWAP_WITHOUT_SCRATCH=y

# nrf7002 firmware handled by sysbuild
SB_CONFIG_WIFI_NRF70=y
SB_CONFIG_WIFI_NRF70_SYSTEM_MODE=y
#SB_CONFIG_WIFI_PATCHES_EXT_FLASH_XIP=y     later

# build of dfu packages
SB_CONFIG_DFU_MULTI_IMAGE_PACKAGE_BUILD=y
SB_CONFIG_DFU_MULTI_IMAGE_PACKAGE_APP=y
SB_CONFIG_DFU_MULTI_IMAGE_PACKAGE_NET=y
SB_CONFIG_DFU_MULTI_IMAGE_PACKAGE_WIFI_FW_PATCH=y

SB_CONFIG_DFU_ZIP=y
SB_CONFIG_DFU_ZIP_APP=y
SB_CONFIG_DFU_ZIP_NET=y
SB_CONFIG_DFU_ZIP_WIFI_FW_PATCH=y

# put slot2 in external flash
SB_CONFIG_PARTITION_MANAGER=y
SB_CONFIG_PM_MCUBOOT_PAD=y
SB_CONFIG_PM_EXTERNAL_FLASH_MCUBOOT_SECONDARY=y
I updated my prj.conf for the changes to nrf70 config option names
I created sysbuild/mcuboot and copied in the prj.conf from the previous child_image/mcuboot.conf
There was already a sysbuild/hci_ipc/prj.conf, I updated it with changes I had made to child_image/hci_ipc.conf 

Then I set west to use my board and sysbuild and try to build:

> west config build.board cc1medv1_nrf5340_cpuapp
> west config build.sysbuild True
> west build --build-dir cc1-med/build cc1-med --board cc1medv1_nrf5340_cpuapp --pristine -DBOARD_ROOT=%CD%
This got me cmake failing.
-- west build: making build dir C:\work\dev\if-device-nrf53\cc1-med\build pristine
-- west build: generating a build system
Loading Zephyr module(s) (Zephyr base): sysbuild_default
-- Found Python3: C:/ncs/toolchains/2d382dcd92/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: C:/ncs/v2.8.0/zephyr/.cache
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: cc1medv1_nrf5340_cpuapp
Parsing C:/work/dev/if-device-nrf53/cc1-med/Kconfig.sysbuild
Loaded configuration 'C:/work/dev/if-device-nrf53/cc1-med/build/_sysbuild/empty.conf'
Merged configuration 'C:/work/dev/if-device-nrf53/cc1-med/build/_sysbuild/empty.conf'
Configuration saved to 'C:/work/dev/if-device-nrf53/cc1-med/build/zephyr/.config'
Kconfig header saved to 'C:/work/dev/if-device-nrf53/cc1-med/build/_sysbuild/autoconf.h'
CMake Error at C:/ncs/v2.8.0/nrf/sysbuild/CMakeLists.txt:117 (list):
  list GET given empty list
Call Stack (most recent call first):
  cmake/modules/sysbuild_extensions.cmake:583 (nrf_PRE_CMAKE)
  cmake/modules/sysbuild_extensions.cmake:583 (cmake_language)
  cmake/modules/sysbuild_images.cmake:16 (sysbuild_module_call)
  cmake/modules/sysbuild_default.cmake:20 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  C:/ncs/v2.8.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
  template/CMakeLists.txt:10 (find_package)


--
   *****************************
   * Running CMake for cc1-med *
   *****************************

Loading Zephyr default modules (Zephyr base).
-- Application: C:/work/dev/if-device-nrf53/cc1-med
-- CMake version: 3.21.0
-- Using NCS Toolchain 2.8.20241106.194216054162 for building. (C:/ncs/toolchains/2d382dcd92/cmake)
-- Found Python3: C:/ncs/toolchains/2d382dcd92/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: C:/ncs/v2.8.0/zephyr/.cache
-- Zephyr version: 3.7.99 (C:/ncs/v2.8.0/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: cc1medv1_nrf5340_cpuapp
-- Found host-tools: zephyr 0.16.8 (C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.16.8 (C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/2d382dcd92/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")

-- Found BOARD.dts: C:/work/dev/if-device-nrf53/boards/arm/cc1medv1_nrf5340/cc1medv1_nrf5340_cpuapp.dts
'label' is marked as deprecated in 'properties:' in C:/ncs/v2.8.0/zephyr/dts/bindings\audio\nordic,nrf-pdm.yaml for node /soc/peripheral@50000000/pdm@26000.
devicetree error: gpio controller <Node /soc/peripheral@50000000/i2c@9000/mcp23017@20 in 'C:/ncs/v2.8.0/zephyr/misc/empty_file.c'> for <Node /soc/peripheral@50000000/pdm@26000/en in 'C:/ncs/v2.8.0/zephyr/misc/empty_file.c'> lacks binding
CMake Error at C:/ncs/v2.8.0/zephyr/cmake/modules/dts.cmake:295 (execute_process):
  execute_process failed command indexes:

    1: "Child return code: 1"

Call Stack (most recent call first):
  C:/ncs/v2.8.0/zephyr/cmake/modules/zephyr_default.cmake:133 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  C:/ncs/v2.8.0/zep-- Configuring incomplete, errors occurred!
hyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:8 (find_package)


CMake Error at cmake/modules/sysbuild_extensions.cmake:514 (message):
  CMake configure failed for Zephyr project: cc1-med

  Location: C:/work/dev/if-device-nrf53/cc1-med
Call Stack (most recent call first):
  cmake/modules/sysbuild_images.cmake:20 (ExternalZephyrProject_Cmake)
  cmake/modules/sysbuild_default.cmake:20 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  C:/ncs/v2.8.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
  template/CMakeLists.txt:10 (find_package)


-- Configuring incomplete, errors occurred!
See also "C:/work/dev/if-device-nrf53/cc1-med/build/CMakeFiles/CMakeOutput.log".
←[91mFATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\2d382dcd92\opt\bin\cmake.EXE' -DWEST_PYTHON=C:/ncs/toolchains/2d382dcd92/opt/bin/python.exe '-BC:\work\dev\if-device-nrf53\cc1-med\build' -GNinja -DBOARD=cc1medv1_nrf5340_cpuapp '-DBOARD_ROOT=C:\work\dev\if-device-nrf53' '-SC:\ncs\v2.8.0\zephyr\share\sysbuild' '-DAPP_DIR:PATH=C:\work\dev\if-device-nrf53\cc1-med'
The DTS also seems to now fail (didn't with 2.6) with:
devicetree error: gpio controller <Node /soc/peripheral@50000000/i2c@9000/mcp23017@20 in 'C:/ncs/v2.8.0/zephyr/misc/empty_file.c'> for <Node /soc/peripheral@50000000/pdm@26000/en in 'C:/ncs/v2.8.0/zephyr/misc/empty_file.c'> lacks binding
 
Now I'm stuck....I'll look at the DTS thing tomorrow... I think I already knew that the DTS stuff had changed 2.6 to 2.8... but the migration guide doesn't reference it as far as I can see?
Parents
  • 0

    1st error: sysbuild.conf goes int he build target sub directory.

    This generates many kconfig errors:

    -  the DFU building part is now complex... remove for later

    - the option noted int he migration guide SB_CONFIG_PM_MCUBOOT_PAD requires a hex value - but no explanation of what this option is for that I can find (both the nordic site and zephyr search options find no responses...). set to 0x200 as a likely value

    - option SB_CONFIG_MCUBOOT_BOOTLOADER_MODE_SWAP_WITHOUT_SCRATCH=y as noted in the migration guide is rejected as unknown

    - and the option SB_CONFIG_NETCORE_HCI_IPC gets a warning, with a handy link that leads to a search page... that doesn't find that option..

    And again, the CMake fails with a useless error that doesn't give any indication of what is causing the issue....

    -- west build: making build dir C:\work\dev\if-device-nrf53\cc1-med\build pristine
    -- west build: generating a build system
    Loading Zephyr module(s) (Zephyr base): sysbuild_default
    -- Found Python3: C:/ncs/toolchains/2d382dcd92/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
    -- Cache files will be written to: C:/ncs/v2.8.0/zephyr/.cache
    -- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
    -- Board: cc1medv1_nrf5340_cpuapp

    warning: The choice symbol NETCORE_HCI_IPC (defined at
    C:/ncs/v2.8.0/nrf/sysbuild\Kconfig.netcore:90) was selected (set =y), but no symbol ended up as the
    choice selection. See docs.zephyrproject.org/.../kconfig.html
    and/or look up NETCORE_HCI_IPC in the menuconfig/guiconfig interface. The Application Development
    Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual
    might be helpful too.

    Parsing C:/work/dev/if-device-nrf53/cc1-med/Kconfig.sysbuild
    Loaded configuration 'C:/work/dev/if-device-nrf53/cc1-med/build/_sysbuild/empty.conf'
    Merged configuration 'C:/work/dev/if-device-nrf53/cc1-med/sysbuild.conf'
    Configuration saved to 'C:/work/dev/if-device-nrf53/cc1-med/build/zephyr/.config'
    Kconfig header saved to 'C:/work/dev/if-device-nrf53/cc1-med/build/_sysbuild/autoconf.h'
    CMake Error at C:/ncs/v2.8.0/nrf/sysbuild/CMakeLists.txt:117 (list):
    list GET given empty list
    Call Stack (most recent call first):
    cmake/modules/sysbuild_extensions.cmake:583 (nrf_PRE_CMAKE)
    cmake/modules/sysbuild_extensions.cmake:583 (cmake_language)
    cmake/modules/sysbuild_images.cmake:16 (sysbuild_module_call)
    cmake/modules/sysbuild_default.cmake:20 (include)
    C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
    C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
    C:/ncs/v2.8.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
    template/CMakeLists.txt:10 (find_package)

    What is missing?

  • 0 in reply to BrianW

    I tried to build the wifi 'sta' sample (copied from the ncs 2.8.0 tree). This fails with the same errors...

    C:\work\dev\if-device-nrf53>west build --build-dir wifi_sta_28/build wifi_sta_28 --board cc1medv1_nrf5340_cpuapp --pristine -DBOARD_ROOT=%CD%
    -- west build: making build dir C:\work\dev\if-device-nrf53\wifi_sta_28\build pristine
    -- west build: generating a build system
    Loading Zephyr module(s) (Zephyr base): sysbuild_default
    -- Found Python3: C:/ncs/toolchains/2d382dcd92/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
    -- Cache files will be written to: C:/ncs/v2.8.0/zephyr/.cache
    -- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
    -- Board: cc1medv1_nrf5340_cpuapp
    Parsing C:/ncs/v2.8.0/zephyr/share/sysbuild/Kconfig
    Loaded configuration 'C:/work/dev/if-device-nrf53/wifi_sta_28/build/_sysbuild/empty.conf'
    Merged configuration 'C:/work/dev/if-device-nrf53/wifi_sta_28/sysbuild.conf'
    Configuration saved to 'C:/work/dev/if-device-nrf53/wifi_sta_28/build/zephyr/.config'
    Kconfig header saved to 'C:/work/dev/if-device-nrf53/wifi_sta_28/build/_sysbuild/autoconf.h'
    CMake Error at C:/ncs/v2.8.0/nrf/sysbuild/CMakeLists.txt:117 (list):
    list GET given empty list
    Call Stack (most recent call first):
    cmake/modules/sysbuild_extensions.cmake:583 (nrf_PRE_CMAKE)
    cmake/modules/sysbuild_extensions.cmake:583 (cmake_language)
    cmake/modules/sysbuild_images.cmake:16 (sysbuild_module_call)
    cmake/modules/sysbuild_default.cmake:20 (include)
    C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
    C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
    C:/ncs/v2.8.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
    template/CMakeLists.txt:10 (find_package)

    What is not correctly installed here?

  • 0 in reply to AHaug

    And, as I said, with the old childimage system it gets further thru the config process (does the CPUNET, and mcuboot, then gets (I assume) to app), and it stops with this:

    -- Target:  Generic/arm
-- Machine: arm
-- Looking for include file stdatomic.h
-- Looking for include file stdatomic.h - found
-- open-amp version: 1.6.1 (C:/ncs/v2.8.0/modules/lib/open-amp/open-amp)
-- Host:    Windows/AMD64
-- Target:  Generic/arm
-- Machine: arm
-- C_FLAGS :  -Wall -Wextra
-- Looking for include file fcntl.h
-- Looking for include file fcntl.h - found
-- Setting build type to 'MinSizeRel' as none was specified.
CMake Warning at C:/ncs/v2.8.0/zephyr/CMakeLists.txt:952 (message):
  No SOURCES given to Zephyr library: drivers__disk

  Excluding target from build.


CMake Warning at C:/ncs/v2.8.0/zephyr/CMakeLists.txt:952 (message):
  No SOURCES given to Zephyr library: drivers__pwm

  Excluding target from build.


CMake Warning at C:/ncs/v2.8.0/zephyr/CMakeLists.txt:2134 (message):
  __ASSERT() statements are globally ENABLED


CMake Deprecation Warning at C:/ncs/v2.8.0/nrf/cmake/partition_manager.cmake:32 (message):


            ---------------------------------------------------------------------
            --- WARNING: Child and parent image functionality is deprecated   ---
            --- and should be replaced with sysbuild. Child and parent image  ---
            --- support remains only to allow existing customer applications  ---
            --- to build and allow porting to sysbuild, it is no longer       ---
            --- receiving updates or new features and it will not be possible ---
            --- to build using child/parent image at all in nRF Connect SDK   ---
            --- version 2.9 onwards.                                          ---
            ---------------------------------------------------------------------
Call Stack (most recent call first):
  C:/ncs/v2.8.0/zephyr/cmake/modules/kernel.cmake:255 (include)
  C:/ncs/v2.8.0/zephyr/cmake/modules/zephyr_default.cmake:142 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:8 (find_package)


-- Found partition manager static configuration: C:/work/dev/if-device-nrf53/cc1-med/pm_static.yml
Partition 'mcuboot' is not included in the dynamic resolving since it is statically defined.
Partition 'mcuboot_pad' is not included in the dynamic resolving since it is statically defined.
Partition 'mcuboot_primary_app' is not included in the dynamic resolving since it is statically defined.
Partition 'mcuboot_primary' is not included in the dynamic resolving since it is statically defined.
Partition 'nvs_storage' is not included in the dynamic resolving since it is statically defined.
Partition 'mcuboot_secondary' is not included in the dynamic resolving since it is statically defined.
Partition 'pcd_sram' is not included in the dynamic resolving since it is statically defined.
Partition 'rpmsg_nrf53_sram' is not included in the dynamic resolving since it is statically defined.
-- Configuring incomplete, errors occurred!
See also "C:/work/dev/if-device-nrf53/cc1-med/build/CMakeFiles/CMakeOutput.log".
See also "C:/work/dev/if-device-nrf53/cc1-med/build/CMakeFiles/CMakeError.log".
←[91mFATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\2d382dcd92\opt\bin\cmake.EXE' -DWEST_PYTHON=C:/ncs/toolchains/2d382dcd92/opt/bin/python.exe '-BC:\work\dev\if-device-nrf53\cc1-med\build' -GNinja -DBOARD=cc2v1/nrf5340/cpuapp -DBOARD_ROOT=/work/dev/if-device-nrf53 '-SC:\work\dev\if-device-nrf53\cc1-med'
←[0m

    and in ther cc1-med/build/CMakeFiles/CMakeError.log it says:

    Compiling the C compiler identification source file "CMakeCCompilerId.c" failed.
Compiler: C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe 
Build flags: 
Id flags:  

The output was:
1
c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.exe: c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/lib\libc.a(lib_a-exit.o): in function `exit':
exit.c:(.text.exit+0x34): undefined reference to `_exit'
collect2.exe: error: ld returned 1 exit status


Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" failed.
Compiler: C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe 
Build flags: 
Id flags:  

The output was:
1
c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.exe: c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/lib\libc.a(lib_a-exit.o): in function `exit':
exit.c:(.text.exit+0x34): undefined reference to `_exit'
collect2.exe: error: ld returned 1 exit status

    I don't understand?

  • 0 in reply to BrianW
    BrianW said:
    It seems it doesn't like something about the flash driver? But this worked fine in 2.6... and also I don't get this error if using child_images build system...

    After diving into a maze of nasty twisty little KConfig dependancies, it seems this is because I need CONFIG_FLASH=y in the sysbuild/mcuboot/prj.conf. Previously this was configured just in the main prj.conf for the project.

    I'm thinking that with sysbuild the 'main app' prj.conf is NOT merged in with the mcuboot one, so this has to stand on its own?

  • 0 in reply to BrianW

    after finding the fix for the CONFIG_FLASH for the sysbuild, it also stops at this step. Can you explain why, given it seems to be using all the elements from the correct toolchain?

    Without a fix for this I am completely blocked.

  • 0 in reply to BrianW

    The full build output:

    C:\work\dev\if-device-nrf53>west build --build-dir cc1-med/build cc1-med --board cc2v1/nrf5340/cpuapp --pristine -DBOARD_ROOT=/work/dev/if-device-nrf53
-- west build: making build dir C:\work\dev\if-device-nrf53\cc1-med\build pristine
-- west build: generating a build system
Loading Zephyr module(s) (Zephyr base): sysbuild_default
-- Found Python3: C:/ncs/toolchains/2d382dcd92/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: C:/ncs/v2.8.0/zephyr/.cache
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: cc2v1, qualifiers: nrf5340/cpuapp
Parsing C:/work/dev/if-device-nrf53/cc1-med/Kconfig.sysbuild
Loaded configuration 'C:/work/dev/if-device-nrf53/cc1-med/build/_sysbuild/empty.conf'
Merged configuration 'C:/work/dev/if-device-nrf53/cc1-med/sysbuild.conf'
Configuration saved to 'C:/work/dev/if-device-nrf53/cc1-med/build/zephyr/.config'
Kconfig header saved to 'C:/work/dev/if-device-nrf53/cc1-med/build/_sysbuild/autoconf.h'
--
   *****************************
   * Running CMake for mcuboot *
   *****************************

Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/v2.8.0/bootloader/mcuboot/boot/zephyr
-- CMake version: 3.21.0
-- Using NCS Toolchain 2.8.20241106.194216054162 for building. (C:/ncs/toolchains/2d382dcd92/cmake)
-- Found Python3: C:/ncs/toolchains/2d382dcd92/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: C:/ncs/v2.8.0/zephyr/.cache
-- Zephyr version: 3.7.99 (C:/ncs/v2.8.0/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: cc2v1, qualifiers: nrf5340/cpuapp
-- Found host-tools: zephyr 0.16.8 (C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.16.8 (C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/2d382dcd92/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")

-- Found BOARD.dts: C:/work/dev/if-device-nrf53/boards/infrafon/cc2v1/cc2v1_nrf5340_cpuapp.dts
'label' is marked as deprecated in 'properties:' in C:/ncs/v2.8.0/zephyr/dts/bindings\audio\nordic,nrf-pdm.yaml for node /soc/peripheral@50000000/pdm@26000.
'label' is marked as deprecated in 'properties:' in C:/ncs/v2.8.0/zephyr/dts/bindings\i2s\nordic,nrf-i2s.yaml for node /soc/peripheral@50000000/i2s@28000.
-- Generated zephyr.dts: C:/work/dev/if-device-nrf53/cc1-med/build/mcuboot/zephyr/zephyr.dts
-- Generated devicetree_generated.h: C:/work/dev/if-device-nrf53/cc1-med/build/mcuboot/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: C:/work/dev/if-device-nrf53/cc1-med/build/mcuboot/zephyr/dts.cmake
CMake Warning at C:/ncs/v2.8.0/zephyr/cmake/modules/dts.cmake:389 (message):
  dtc raised one or more warnings:

  <stdout>: Warning (avoid_unnecessary_addr_size):
  /soc/peripheral@50000000/i2s@28000: unnecessary #address-cells/#size-cells
  without "ranges" or child "reg" property

Call Stack (most recent call first):
  C:/ncs/v2.8.0/zephyr/cmake/modules/zephyr_default.cmake:133 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:12 (find_package)


Parsing C:/ncs/v2.8.0/bootloader/mcuboot/boot/zephyr/Kconfig
Loaded configuration 'C:/work/dev/if-device-nrf53/boards/infrafon/cc2v1/cc2v1_nrf5340_cpuapp_defconfig'
Merged configuration 'C:/work/dev/if-device-nrf53/cc1-med/sysbuild/mcuboot/prj.conf'
Merged configuration 'C:/ncs/v2.8.0/nrf/subsys/partition_manager/ext_flash_mcuboot_secondary.conf'
Merged configuration 'C:/work/dev/if-device-nrf53/cc1-med/build/mcuboot/zephyr/.config.sysbuild'
Configuration saved to 'C:/work/dev/if-device-nrf53/cc1-med/build/mcuboot/zephyr/.config'
Kconfig header saved to 'C:/work/dev/if-device-nrf53/cc1-med/build/mcuboot/zephyr/include/generated/zephyr/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
-- Setting build type to 'MinSizeRel' as none was specified.
MCUBoot bootloader key file: /work/dev/if-device-nrf53/keys/bootloader_priv-ecdsa256.pem
-- Configuring done
-- Generating done
-- Build files have been written to: C:/work/dev/if-device-nrf53/cc1-med/build/mcuboot
--
   *****************************
   * Running CMake for hci_ipc *
   *****************************

Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/v2.8.0/zephyr/samples/bluetooth/hci_ipc
-- CMake version: 3.21.0
-- Using NCS Toolchain 2.8.20241106.194216054162 for building. (C:/ncs/toolchains/2d382dcd92/cmake)
-- Found Python3: C:/ncs/toolchains/2d382dcd92/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: C:/ncs/v2.8.0/zephyr/.cache
-- Zephyr version: 3.7.99 (C:/ncs/v2.8.0/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: cc2v1, qualifiers: nrf5340/cpunet
-- Found host-tools: zephyr 0.16.8 (C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.16.8 (C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/2d382dcd92/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")

-- Found BOARD.dts: C:/work/dev/if-device-nrf53/boards/infrafon/cc2v1/cc2v1_nrf5340_cpunet.dts
-- Generated zephyr.dts: C:/work/dev/if-device-nrf53/cc1-med/build/hci_ipc/zephyr/zephyr.dts
-- Generated devicetree_generated.h: C:/work/dev/if-device-nrf53/cc1-med/build/hci_ipc/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: C:/work/dev/if-device-nrf53/cc1-med/build/hci_ipc/zephyr/dts.cmake
Parsing C:/ncs/v2.8.0/zephyr/Kconfig
Loaded configuration 'C:/work/dev/if-device-nrf53/boards/infrafon/cc2v1/cc2v1_nrf5340_cpunet_defconfig'
Merged configuration 'C:/work/dev/if-device-nrf53/cc1-med/sysbuild/hci_ipc/prj.conf'
Merged configuration 'C:/work/dev/if-device-nrf53/cc1-med/build/hci_ipc/zephyr/.config.sysbuild'
Configuration saved to 'C:/work/dev/if-device-nrf53/cc1-med/build/hci_ipc/zephyr/.config'
Kconfig header saved to 'C:/work/dev/if-device-nrf53/cc1-med/build/hci_ipc/zephyr/include/generated/zephyr/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
-- libmetal version: 1.6.0 (C:/ncs/v2.8.0/zephyr/samples/bluetooth/hci_ipc)
-- Build type:
-- Host:    Windows/AMD64
-- Target:  Generic/arm
-- Machine: arm
-- Looking for include file stdatomic.h
-- Looking for include file stdatomic.h - found
-- open-amp version: 1.6.1 (C:/ncs/v2.8.0/modules/lib/open-amp/open-amp)
-- Host:    Windows/AMD64
-- Target:  Generic/arm
-- Machine: arm
-- C_FLAGS :  -Wall -Wextra
-- Looking for include file fcntl.h
-- Looking for include file fcntl.h - found
-- Setting build type to 'MinSizeRel' as none was specified.
-- Configuring done
-- Generating done
-- Build files have been written to: C:/work/dev/if-device-nrf53/cc1-med/build/hci_ipc
--
   *****************************
   * Running CMake for cc1-med *
   *****************************

Loading Zephyr default modules (Zephyr base).
-- Application: C:/work/dev/if-device-nrf53/cc1-med
-- CMake version: 3.21.0
-- Using NCS Toolchain 2.8.20241106.194216054162 for building. (C:/ncs/toolchains/2d382dcd92/cmake)
-- Found Python3: C:/ncs/toolchains/2d382dcd92/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: C:/ncs/v2.8.0/zephyr/.cache
-- Zephyr version: 3.7.99 (C:/ncs/v2.8.0/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: cc2v1, qualifiers: nrf5340/cpuapp
-- Found host-tools: zephyr 0.16.8 (C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.16.8 (C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/2d382dcd92/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")

-- Found BOARD.dts: C:/work/dev/if-device-nrf53/boards/infrafon/cc2v1/cc2v1_nrf5340_cpuapp.dts
'label' is marked as deprecated in 'properties:' in C:/ncs/v2.8.0/zephyr/dts/bindings\audio\nordic,nrf-pdm.yaml for node /soc/peripheral@50000000/pdm@26000.
'label' is marked as deprecated in 'properties:' in C:/ncs/v2.8.0/zephyr/dts/bindings\i2s\nordic,nrf-i2s.yaml for node /soc/peripheral@50000000/i2s@28000.
-- Generated zephyr.dts: C:/work/dev/if-device-nrf53/cc1-med/build/cc1-med/zephyr/zephyr.dts
-- Generated devicetree_generated.h: C:/work/dev/if-device-nrf53/cc1-med/build/cc1-med/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: C:/work/dev/if-device-nrf53/cc1-med/build/cc1-med/zephyr/dts.cmake
CMake Warning at C:/ncs/v2.8.0/zephyr/cmake/modules/dts.cmake:389 (message):
  dtc raised one or more warnings:

  <stdout>: Warning (avoid_unnecessary_addr_size):
  /soc/peripheral@50000000/i2s@28000: unnecessary #address-cells/#size-cells
  without "ranges" or child "reg" property

Call Stack (most recent call first):
  C:/ncs/v2.8.0/zephyr/cmake/modules/zephyr_default.cmake:133 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:8 (find_package)



warning: NRF_SECURITY (defined at C:/ncs/v2.8.0/nrf\subsys\nrf_security/Kconfig:32) was assigned the
value 'n' but got the value 'y'. See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_NRF_SECURITY and/or look up NRF_SECURITY in
the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.


warning: DISK_DRIVER_FLASH (defined at drivers/disk/Kconfig.flash:4) was assigned the value 'y' but
got the value 'n'. Check these unsatisfied dependencies: DT_HAS_ZEPHYR_FLASH_DISK_ENABLED (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_DISK_DRIVER_FLASH and/or look up
DISK_DRIVER_FLASH in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.


warning: Deprecated symbol MBEDTLS_LEGACY_CRYPTO_C is enabled.


warning: Experimental symbol WIFI_READY_LIB is enabled.


warning: Experimental symbol WIFI_NM_WPA_SUPPLICANT is enabled.


warning: Experimental symbol WIFI_NM_WPA_SUPPLICANT is enabled.


warning: Experimental symbol NRF_WIFI_RPU_RECOVERY is enabled.


warning: Experimental symbol POSIX_ASYNCHRONOUS_IO is enabled.


warning: Experimental symbol POSIX_DEVICE_IO is enabled.


warning: Experimental symbol POSIX_FD_MGMT is enabled.


warning: Experimental symbol POSIX_MULTI_PROCESS is enabled.


warning: Experimental symbol POSIX_REALTIME_SIGNALS is enabled.


warning: Experimental symbol POSIX_SIGNALS is enabled.


warning: Experimental symbol NET_SOCKETS_SERVICE is enabled.

Parsing C:/ncs/v2.8.0/zephyr/Kconfig
Loaded configuration 'C:/work/dev/if-device-nrf53/boards/infrafon/cc2v1/cc2v1_nrf5340_cpuapp_defconfig'
Merged configuration 'C:/work/dev/if-device-nrf53/cc1-med/prj.conf'
Merged configuration 'C:/work/dev/if-device-nrf53/cc1-med/build/cc1-med/zephyr/.config.sysbuild'
Configuration saved to 'C:/work/dev/if-device-nrf53/cc1-med/build/cc1-med/zephyr/.config'
Kconfig header saved to 'C:/work/dev/if-device-nrf53/cc1-med/build/cc1-med/zephyr/include/generated/zephyr/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
=========== Generating psa_crypto_config ===============
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Backup: CONFIG_MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT: False
Backup: CONFIG_MBEDTLS_THREADING: False
Backup: CONFIG_MBEDTLS_THREADING_ALT: True
=========== Checkpoint: backup ===============
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Restore: CONFIG_MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT: False
Restore: CONFIG_MBEDTLS_THREADING: False
Restore: CONFIG_MBEDTLS_THREADING_ALT: True
=========== End psa_crypto_config ===============
=========== Generating psa_crypto_library_config ===============
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Backup: CONFIG_MBEDTLS_USE_PSA_CRYPTO: False
Backup: CONFIG_MBEDTLS_PLATFORM_PRINTF_ALT: False
Backup: CONFIG_MBEDTLS_THREADING: False
Backup: CONFIG_MBEDTLS_THREADING_ALT: True
=========== Checkpoint: backup ===============
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Restore: CONFIG_MBEDTLS_USE_PSA_CRYPTO: False
Restore: CONFIG_MBEDTLS_PLATFORM_PRINTF_ALT: False
Restore: CONFIG_MBEDTLS_THREADING: False
Restore: CONFIG_MBEDTLS_THREADING_ALT: True
=========== End psa_crypto_library_config ===============
CMake Error at C:/ncs/v2.8.0/zephyr/cmake/modules/extensions.cmake:695 (add_custom_target):
  add_custom_target cannot create target
  "gen_nrf70_bin_inc_77552e44891130fb8290820867cdfb8b" because another target
  with the same name already exists.  The existing target is a custom target
  created in source directory "C:/ncs/v2.8.0/zephyr/drivers/wifi/nrfwifi".
  See documentation for policy CMP0002 for more details.
Call Stack (most recent call first):
  C:/ncs/v2.8.0/nrf/subsys/net/lib/nrf70_fw_ext/CMakeLists.txt:45 (generate_inc_file_for_target)


-- libmetal version: 1.6.0 (C:/work/dev/if-device-nrf53/cc1-med)
-- Build type:
-- Host:    Windows/AMD64
-- Target:  Generic/arm
-- Machine: arm
-- Looking for include file stdatomic.h
-- Looking for include file stdatomic.h - found
-- open-amp version: 1.6.1 (C:/ncs/v2.8.0/modules/lib/open-amp/open-amp)
-- Host:    Windows/AMD64
-- Target:  Generic/arm
-- Machine: arm
-- C_FLAGS :  -Wall -Wextra
-- Looking for include file fcntl.h
-- Looking for include file fcntl.h - found
-- Setting build type to 'MinSizeRel' as none was specified.
CMake Warning at C:/ncs/v2.8.0/zephyr/CMakeLists.txt:952 (message):
  No SOURCES given to Zephyr library: drivers__disk

  Excluding target from build.


CMake Warning at C:/ncs/v2.8.0/zephyr/CMakeLists.txt:952 (message):
  No SOURCES given to Zephyr library: drivers__pwm

  Excluding target from build.


-- Including signing script: C:/ncs/v2.8.0/nrf/cmake/sysbuild/image_signing.cmake
CMake Warning at C:/ncs/v2.8.0/zephyr/CMakeLists.txt:2134 (message):
  __ASSERT() statements are globally ENABLED


-- Configuring incomplete, errors occurred!
See also "C:/work/dev/if-device-nrf53/cc1-med/build/cc1-med/CMakeFiles/CMakeOutput.log".
See also "C:/work/dev/if-device-nrf53/cc1-med/build/cc1-med/CMakeFiles/CMakeError.log".
CMake Error at cmake/modules/sysbuild_extensions.cmake:514 (message):
  CMake configure failed for Zephyr project: cc1-med

  Location: C:/work/dev/if-device-nrf53/cc1-med
Call Stack (most recent call first):
  cmake/modules/sysbuild_images.cmake:20 (ExternalZephyrProject_Cmake)
  cmake/modules/sysbuild_default.cmake:20 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  C:/ncs/v2.8.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  C:/ncs/v2.8.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
  template/CMakeLists.txt:10 (find_package)


-- Configuring incomplete, errors occurred!
See also "C:/work/dev/if-device-nrf53/cc1-med/build/CMakeFiles/CMakeOutput.log".
←[91mFATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\2d382dcd92\opt\bin\cmake.EXE' -DWEST_PYTHON=C:/ncs/toolchains/2d382dcd92/opt/bin/python.exe '-BC:\work\dev\if-device-nrf53\cc1-med\build' -GNinja -DBOARD=cc2v1/nrf5340/cpuapp -DBOARD_ROOT=/work/dev/if-device-nrf53 '-SC:\ncs\v2.8.0\zephyr\share\sysbuild' '-DAPP_DIR:PATH=C:\work\dev\if-device-nrf53\cc1-med'
←[0m

    The CMakeError.log:

    Compiling the C compiler identification source file "CMakeCCompilerId.c" failed.
Compiler: C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe 
Build flags: 
Id flags:  

The output was:
1
c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.exe: c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/lib\libc.a(lib_a-exit.o): in function `exit':
exit.c:(.text.exit+0x34): undefined reference to `_exit'
collect2.exe: error: ld returned 1 exit status


Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" failed.
Compiler: C:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe 
Build flags: 
Id flags:  

The output was:
1
c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.exe: c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/lib\libc.a(lib_a-exit.o): in function `exit':
exit.c:(.text.exit+0x34): undefined reference to `_exit'
collect2.exe: error: ld returned 1 exit status

    Its failing to link a cmake tool?

    c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.exe: c:/ncs/toolchains/2d382dcd92/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/lib\libc.a(lib_a-exit.o): in function `exit':
    exit.c:(.text.exit+0x34): undefined reference to `_exit'
    collect2.exe: error: ld returned 1 exit status
    The only other error I see is this:
    CMake Error at C:/ncs/v2.8.0/zephyr/cmake/modules/extensions.cmake:695 (add_custom_target):
    add_custom_target cannot create target
    "gen_nrf70_bin_inc_77552e44891130fb8290820867cdfb8b" because another target
    with the same name already exists. The existing target is a custom target
    created in source directory "C:/ncs/v2.8.0/zephyr/drivers/wifi/nrfwifi".
    See documentation for policy CMP0002 for more details.
    Call Stack (most recent call first):
    C:/ncs/v2.8.0/nrf/subsys/net/lib/nrf70_fw_ext/CMakeLists.txt:45 (generate_inc_file_for_target)
    but this seems to be linked to the nrf70 wifi stuff? Maybe no link to the cmake error?
    I also see this:
    warning: DISK_DRIVER_FLASH (defined at drivers/disk/Kconfig.flash:4) was assigned the value 'y' but
    got the value 'n'. Check these unsatisfied dependencies: DT_HAS_ZEPHYR_FLASH_DISK_ENABLED (=n). 
    which makes me wonder why it can't find the flash disk definition in my DTS? What exactly does the DT_HAS_... macro look for? I have defined 
            zephyr,flash-disk = &mx25r64;
  • 0 in reply to BrianW

    Hi,

    HWM2

    BrianW said:
    I can ignore these, yes?

    I wouldn't recommend you to ignore any compilation warnings. The warnings you mention are labeled as deprecated.

    BrianW said:
    2/ a more serious looking warning, but related (as far as I can tell) to dts definitions in the SDK

    This warning seems to be interesting as it is not present in the default audio application configuration (and in neither of the other samples I've built to test). Could you add your modification to the i2s0 device within for instance https://github.com/nrfconnect/sdk-nrf/tree/main/applications/nrf5340_audio or any of the other audio samples and see if you're able to force the warning w.r.t address and size from there?

    BrianW said:
    3/ enabling the PDM driver 

    Looks to me that this has changed from _PDM to _PDM0 in 2.8.0: https://docs.nordicsemi.com/bundle/ncs-2.8.0/page/kconfig/index.html#CONFIG_NRFX_PDM0

    Sysbuild:

    I see you've addressed some of the sysbuild questions/uncertainties in the reply following the longer set of sysbuild questions so I'll start there:

    BrianW said:
    I'm thinking that with sysbuild the 'main app' prj.conf is NOT merged in with the mcuboot one, so this has to stand on its own?

    Yes, this is correct. You still need to have a prj.conf for your app. Sysbuild only handles companion images

    BrianW said:
    Ok, I see the example has the file called mcuboot.conf, however if I name it that then I get:

    You can see the structure of sysbuild companion images here as well: https://github.com/nrfconnect/sdk-nrf/tree/main/applications/nrf5340_audio/sysbuild. I'm not sure if my explanation of the structure caused any misunderstandings.

    It is unfortunately too many changes simultaneously that causes the build crashes with no useful information you listed in your replies from yesterday.

    Here's a breakdown of what I would've done if I were to migrate from 2.6.1 to 2.8.0:

    1. Start with the audio app and montior changes from 2.6.1 to 2.8.0. Pay attention to changes from child_image/ to sysbuild/ as well as the addition to sysbuild.conf together with prj.conf
    2. Compare the board files within said project and the board files for the 5340 in 2.6.1 and 2.8.0. These are the changes w.r.t hwm1 and hwm2 in addition to the migration note for this https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/migration/migration_hwmv2.html
    3. After you've migrated to hwmv2, try to build with "--no-sysbuild". This should allow you to build with child and parent images. This is still supported in 2.8.0, but will not be in 2.9.0.
    4. Resolve any configuration errors and make it compile without sysbuild
    5. Start with migration from child/parent images to sysbuild. Make note of the changes in item 1 and the two links you sent in the start

      https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/migration/migration_sysbuild.html

      https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/migration/migration_guide_2.8.html

    Unfortunately there will be some downtime in the coming weeks due to holidays here in Norway, so activity will be slow on devzone until early Janaury. I'm sorry for not being able to help you pinpoint the migration issues before now but I strongly believe that if you methodically follow the 5 steps I listed you will succeed.

    Kind regards,
    Andreas

Reply
  • 0 in reply to BrianW

    Hi,

    HWM2

    BrianW said:
    I can ignore these, yes?

    I wouldn't recommend you to ignore any compilation warnings. The warnings you mention are labeled as deprecated.

    BrianW said:
    2/ a more serious looking warning, but related (as far as I can tell) to dts definitions in the SDK

    This warning seems to be interesting as it is not present in the default audio application configuration (and in neither of the other samples I've built to test). Could you add your modification to the i2s0 device within for instance https://github.com/nrfconnect/sdk-nrf/tree/main/applications/nrf5340_audio or any of the other audio samples and see if you're able to force the warning w.r.t address and size from there?

    BrianW said:
    3/ enabling the PDM driver 

    Looks to me that this has changed from _PDM to _PDM0 in 2.8.0: https://docs.nordicsemi.com/bundle/ncs-2.8.0/page/kconfig/index.html#CONFIG_NRFX_PDM0

    Sysbuild:

    I see you've addressed some of the sysbuild questions/uncertainties in the reply following the longer set of sysbuild questions so I'll start there:

    BrianW said:
    I'm thinking that with sysbuild the 'main app' prj.conf is NOT merged in with the mcuboot one, so this has to stand on its own?

    Yes, this is correct. You still need to have a prj.conf for your app. Sysbuild only handles companion images

    BrianW said:
    Ok, I see the example has the file called mcuboot.conf, however if I name it that then I get:

    You can see the structure of sysbuild companion images here as well: https://github.com/nrfconnect/sdk-nrf/tree/main/applications/nrf5340_audio/sysbuild. I'm not sure if my explanation of the structure caused any misunderstandings.

    It is unfortunately too many changes simultaneously that causes the build crashes with no useful information you listed in your replies from yesterday.

    Here's a breakdown of what I would've done if I were to migrate from 2.6.1 to 2.8.0:

    1. Start with the audio app and montior changes from 2.6.1 to 2.8.0. Pay attention to changes from child_image/ to sysbuild/ as well as the addition to sysbuild.conf together with prj.conf
    2. Compare the board files within said project and the board files for the 5340 in 2.6.1 and 2.8.0. These are the changes w.r.t hwm1 and hwm2 in addition to the migration note for this https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/migration/migration_hwmv2.html
    3. After you've migrated to hwmv2, try to build with "--no-sysbuild". This should allow you to build with child and parent images. This is still supported in 2.8.0, but will not be in 2.9.0.
    4. Resolve any configuration errors and make it compile without sysbuild
    5. Start with migration from child/parent images to sysbuild. Make note of the changes in item 1 and the two links you sent in the start

      https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/migration/migration_sysbuild.html

      https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/migration/migration_guide_2.8.html

    Unfortunately there will be some downtime in the coming weeks due to holidays here in Norway, so activity will be slow on devzone until early Janaury. I'm sorry for not being able to help you pinpoint the migration issues before now but I strongly believe that if you methodically follow the 5 steps I listed you will succeed.

    Kind regards,
    Andreas

Children
Related