Long Range Support in LE Audio

[Ridhi]

We are using ncs 2.6.0 and nrf5340 audio dks.

Sample is nrf5340_audio broadcaster.

One dk is configured to work as Audio Broadcast BIS Source and other as Sink. By default the sample runs using 2M PHY.

We want to configure the sample in CODED PHY mode. Kindly assist.

[Øyvind]

Hello, 

As per your previous ticket with my colleague Hung, there is no support for this. 

Kind regards,
Øyvind

[Ridhi]

Hey Oyvind

Would b great if you can kindly suggest the possible workaround..

[Ridhi]

as the product sheet for the audio dk states taht it supports long range feature

[Øyvind]

Hello, 

Are you referring to the Long Range mentioned under nRF5340 SoC? 

If so, yes, the nRF5340 SoC does support long range but our audio applications do not support this yet.

Kind regards,
Øyvind

[Ridhi]

Yes Oyvind its the reference specifically in nrf5340 Audio DK. And in zephyr ncs also 

Having looked into nrf5340_audio brodacaster sample path:
zephyr\include\zephyr\bluetooth\audio\audio.h:

BT_AUDIO_CODEC_QOS_CODED = BIT(2), is provided.

So, we hope that the support might be there.

[Øyvind]

Ridhi said:

Yes Oyvind its the reference specifically in nrf5340 Audio DK.

This is not specific for the Audio DK, but for the nRF5340 SoC. 

Ridhi said:

zephyr\include\zephyr\bluetooth\audio\audio.h:

Please see our nRF5340 Audio applicationss under nrf\applications\nrf5340_audio. 

The feedback from our developers is that lond range / coded phy is not support. End of discussion.