NRF21540 EK Testing

[Irfan Memon]

Hi,

There were GPIO /SPI Interface headers are given on NRF21540 EK .now how we can connect RF input to TRX pin of NRF21540.

please provide the Understanding of RF input.

Regards,

Irfan

[Irfan Memon]

Hi,

Please reply for above queries.

Regards,

Irfan

[Asbjørn]

Hello Ifran,

https://docs.nordicsemi.com/bundle/ug_nrf21540_ek/page/UG/nrf21540_DK/hw_rf_measure.html

You connect the RF from your radio to the TRX pin with a cable and then select which ANT1 or ANT2 pin you want to have the amplified signal out on. Maybe I'm not understanding your question correctly, so please share what sort of kits you have and what you are trying to do.

Best regards

Asbjørn

[Irfan Memon]

Hi,

Want to buy NRF21540 EK. EK having RF Input Connector. so how to connect With TRX Connector ?means give the cable name connect with TRX to other end. also give from which DK board we can connect TRX Input.

Also guide provide cable details/antenna details which can be connect on ANt1and ANt2

Regards,

Irfan

[Asbjørn]

The HW files with BOM for the kit is available here:

https://nsscprodmedia.blob.core.windows.net/prod/software-and-other-downloads/dev-kits/nrf21540-db/nrf21540-development-bundle---hardware-files-2_0_0.zip

The link is from this page here under download: https://www.nordicsemi.com/Products/Development-hardware/nRF21540-DB/Download?lang=en#infotabs

nRF21540 DB - Downloads Nordic Semiconductor www.nordicsemi.com



The connector details for ANT1 and ANT2 are also in the BOM under the production files folder in the HW description above.

Best regards

Asbjørn