Hi,
I have encountered issues flashing a NRF52833 board which is on a custom PCB. I have picked the project up from another developer so it is somewhat developed already. The project is using the v1.8.0 sdk. I have the SDK installed and worked, I am able to build the project without issue. I am developing with vs code and the nrf connect addon. Following instructions left by the previous developer I set the environment up, and build the hex file successfully. I used both jflash-lite and nrfconnect to flash. The first couple of attempts were successful and then the board became unresponsive. I have tried on 3 boards all which became unresponsive.
I went back to the original developer to work through the problem and I used his instance of the project for comparison, with his instance he could flash the device without issue. He has a copy of my instance inline with his (so that they became identical on his machine) and found that when flashing his board became unresponsive also.
The only additional changes I could find from previous releases in the build config were additional cmake cmds:
"-DBOARD_ROOT=\"c:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833\"",
"-Dmcuboot_DTC_OVERLAY_FILE=\"C:/ncs/v1.8.0/nrf/modules/mcuboot/usb.overlay\"",
"-Dmcuboot_OVERLAY_CONFIG=\"C:/ncs/v1.8.0/nrf/subsys/partition_manager/partition_manager_enabled.conf\""
I performed a full reinstallation of sdk and clean project without additional cmake cmds, and was able to eventually achieve flashing the device with a release config that was repeatable without issue...
With that working, but not understanding what causes the issue on either my setup or the previous developers, I then needed to build a debug instance to make code changes and see the output. Using this config I built the project, and immediately experience the same bricked device issue.
This is the output from the debug build session which bricked the board. Would you be able to offer any insight into what is causing the issue? We are board 4 PCBs bricked now, where any command line recovery tools timeout with:
Connecting to J-Link...
Bank selection: BankAddr=0x00000000 Enabled
Bank selection: BankAddr=0x10001000 Enabled
Loader selection: BankAddr=0x00000000 Loader=Default
Loader selection: BankAddr=0x10001000 Loader=Default
Connecting to target...
ERROR: Could not connect to target.
Done.
Connecting to J-Link...
Bank selection: BankAddr=0x00000000 Enabled
Bank selection: BankAddr=0x10001000 Enabled
Loader selection: BankAddr=0x00000000 Loader=Default
Loader selection: BankAddr=0x10001000 Loader=Default
Connecting to target...
ERROR: Could not connect to target.
Done.
Debug session build output:
* Executing task: nRF Connect: Generate config nrf52833dk_nrf52833 for c:\Users\voidn_l4qz259\Documents\GitHub\Eclateral\AsclepiusFirmware\Asclepius_reader_nrf52833
Building Asclepius_reader_nrf52833
C:\Windows\system32\cmd.exe /d /s /c "west build --build-dir c:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833/build_debug c:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833 --pristine --board nrf52833dk_nrf52833 -- -DNCS_TOOLCHAIN_VERSION=NONE -DCONF_FILE=c:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833/prjDebugManufacturing.conf -DBOARD_ROOT=c:/users/voidn_l4qz259/documents/github/eclateral/asclepiusfirmware/asclepius_reader_nrf52833"
-- west build: generating a build system
Including boilerplate (Zephyr base): C:/ncs/v1.8.0/zephyr/cmake/app/boilerplate.cmake
-- Application: C:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833
-- Zephyr version: 2.7.0 (C:/ncs/v1.8.0/zephyr), build: v2.7.0-ncs1
-- Found Python3: C:/ncs/v1.8.0/toolchain/opt/bin/python.exe (found suitable exact version "3.8.2") found components: Interpreter
-- Found west (found suitable version "0.12.0", minimum required is "0.7.1")
-- Board: nrf52833dk_nrf52833
-- Cache files will be written to: C:/ncs/v1.8.0/zephyr/.cache
-- Found dtc: C:/ncs/v1.8.0/toolchain/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found toolchain: gnuarmemb (c:/ncs/v1.8.0/toolchain/opt)
-- Found BOARD.dts: C:/ncs/v1.8.0/zephyr/boards/arm/nrf52833dk_nrf52833/nrf52833dk_nrf52833.dts
-- Found devicetree overlay: C:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833/boards/nrf52833dk_nrf52833.overlay
-- Generated zephyr.dts: C:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833/build_debug/zephyr/zephyr.dts
-- Generated devicetree_unfixed.h: C:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833/build_debug/zephyr/include/generated/devicetree_unfixed.h
-- Generated device_extern.h: C:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833/build_debug/zephyr/include/generated/device_extern.h
-- Including generated dts.cmake file: C:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833/build_debug/zephyr/dts.cmake
warning: BT_DIS_MODEL (defined at C:/ncs/v1.8.0/zephyr/subsys/bluetooth/services\Kconfig.dis:26,
subsys/bluetooth\services\Kconfig.dis:26) was assigned the value 'v0.0.1' but got the value ''.
Check these unsatisfied dependencies: ((BT_DIS && BT_CONN && BT_RPC_STACK) || (BT_DIS && BT_CONN &&
BT_HCI && BT)) (=n). See
http://docs.zephyrproject.org/latest/reference/kconfig/CONFIG_BT_DIS_MODEL.html and/or look up
BT_DIS_MODEL in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.
warning: BT_DIS_MANUF (defined at C:/ncs/v1.8.0/zephyr/subsys/bluetooth/services\Kconfig.dis:32,
subsys/bluetooth\services\Kconfig.dis:32) was assigned the value 'Eclateral' but got the value ''.
Check these unsatisfied dependencies: ((BT_DIS && BT_CONN && BT_RPC_STACK) || (BT_DIS && BT_CONN &&
BT_HCI && BT)) (=n). See
Parsing C:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833/Kconfig
Loaded configuration 'C:/ncs/v1.8.0/zephyr/boards/arm/nrf52833dk_nrf52833/nrf52833dk_nrf52833_defconfig'
Merged configuration 'c:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833/prjDebugManufacturing.conf'
Configuration saved to 'C:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833/build_debug/zephyr/.config'
Kconfig header saved to 'C:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833/build_debug/zephyr/include/generated/autoconf.h'
http://docs.zephyrproject.org/latest/reference/kconfig/CONFIG_BT_DIS_MANUF.html and/or look up
BT_DIS_MANUF in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.
warning: BT_DIS_FW_REV_STR (defined at
C:/ncs/v1.8.0/zephyr/subsys/bluetooth/services\Kconfig.dis:117,
subsys/bluetooth\services\Kconfig.dis:117) was assigned the value 'v0.0.7' but got the value ''.
Check these unsatisfied dependencies: ((BT_DIS_FW_REV && BT_DIS && BT_CONN && BT_RPC_STACK) ||
(BT_DIS_FW_REV && BT_DIS && BT_CONN && BT_HCI && BT)) (=n). See
http://docs.zephyrproject.org/latest/reference/kconfig/CONFIG_BT_DIS_FW_REV_STR.html and/or look up
BT_DIS_FW_REV_STR in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.
-- The C compiler identification is GNU 9.2.1
-- The CXX compiler identification is GNU 9.2.1
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/v1.8.0/toolchain/opt/bin/arm-none-eabi-gcc.exe
CMake Warning at C:/ncs/v1.8.0/zephyr/subsys/bluetooth/host/CMakeLists.txt:103 (message):
CONFIG_BT_FIXED_PASSKEY is enabled
A fixed passkey is easy to deduce during the pairing procedure, do not use in
production.
CMake Warning at C:/ncs/v1.8.0/zephyr/subsys/usb/CMakeLists.txt:22 (message):
CONFIG_USB_DEVICE_VID has default value 0x2FE3.
This value is only for testing and MUST be configured for USB products.
-- Configuring done
-- Generating done
-- Build files have been written to: C:/Users/voidn_l4qz259/Documents/GitHub/Eclateral/AsclepiusFirmware/Asclepius_reader_nrf52833/build_debug
-- west build: building application
[1/273] Generating misc/generated/syscalls.json, misc/generated/struct_tags.json
[2/273] Generating include/generated/driver-validation.h
[3/273] Generating include/generated/kobj-types-enum.h, include/generated/otype-to-str.h, include/generated/otype-to-size.h
[4/273] Generating include/generated/syscall_dispatch.c, include/generated/syscall_list.h
[5/273] Building C object zephyr/CMakeFiles/offsets.dir/arch/arm/core/offsets/offsets.c.obj
[6/273] Generating include/generated/offsets.h
[7/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/net/lib/utils/addr_utils.c.obj
[8/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/sem.c.obj
[9/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/hex.c.obj
[10/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/notify.c.obj
[11/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/timeutil.c.obj
[12/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/thread_entry.c.obj
[13/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/printk.c.obj
[14/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/dfu/img_util/flash_img.c.obj
[15/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/onoff.c.obj
[16/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/heap-validate.c.obj
[17/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/heap.c.obj
[18/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/rb.c.obj
[19/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/bitarray.c.obj
[20/273] Building ASM object zephyr/CMakeFiles/zephyr.dir/soc/arm/nordic_nrf/common/soc_nrf_common.S.obj
[21/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/cbprintf_complete.c.obj
[22/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/console/getline.c.obj
[23/273] Building C object zephyr/CMakeFiles/zephyr.dir/soc/arm/nordic_nrf/validate_base_addresses.c.obj
[24/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/reboot.c.obj
[25/273] Building C object zephyr/CMakeFiles/zephyr.dir/misc/generated/configs.c.obj
[26/273] Building C object zephyr/CMakeFiles/zephyr.dir/soc/arm/nordic_nrf/validate_enabled_instances.c.obj
[27/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/settings/src/settings_line.c.obj
[28/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/ring_buffer.c.obj
[29/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/bluetooth/services/bas.c.obj
[30/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/settings/src/settings_store.c.obj
[31/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/settings/src/settings_nvs.c.obj
[32/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/settings/src/settings_init.c.obj
[33/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/usb/usb_work_q.c.obj
[34/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/storage/flash_map/flash_map.c.obj
[35/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/usb/usb_device.c.obj
[36/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/storage/flash_map/flash_map_default.c.obj
[37/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/fs/nvs/nvs.c.obj
[38/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/settings/src/settings.c.obj
[39/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/usb/usb_transfer.c.obj
[40/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/tracing/tracing_none.c.obj
[41/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/pm/pm_ctrl.c.obj
[42/273] Building C object zephyr/CMakeFiles/zephyr.dir/C_/ncs/v1.8.0/modules/crypto/tinycrypt/lib/source/utils.c.obj
[43/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/storage/stream/stream_flash.c.obj
[44/273] Building C object zephyr/CMakeFiles/zephyr.dir/C_/ncs/v1.8.0/modules/crypto/tinycrypt/lib/source/cmac_mode.c.obj
[45/273] Building C object zephyr/CMakeFiles/zephyr.dir/C_/ncs/v1.8.0/modules/crypto/tinycrypt/lib/source/aes_encrypt.c.obj
[46/273] Building C object zephyr/CMakeFiles/zephyr.dir/C_/ncs/v1.8.0/modules/crypto/tinycrypt/lib/source/ecc_dh.c.obj
[47/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/pm/power.c.obj
[48/273] Building C object zephyr/CMakeFiles/zephyr.dir/C_/ncs/v1.8.0/modules/crypto/tinycrypt/lib/source/aes_decrypt.c.obj
[49/273] Generating linker_zephyr_prebuilt.cmd
[50/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/usb/class/cdc_acm.c.obj
[51/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/pm/policy/policy_residency.c.obj
[52/273] Building ASM object zephyr/arch/arch/arm/core/aarch32/CMakeFiles/arch__arm__core__aarch32.dir/isr_wrapper.S.obj
[53/273] Building ASM object zephyr/arch/arch/arm/core/aarch32/CMakeFiles/arch__arm__core__aarch32.dir/swap_helper.S.obj
[54/273] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/usb/usb_descriptor.c.obj
[55/273] Building ASM object zephyr/arch/arch/arm/core/aarch32/CMakeFiles/arch__arm__core__aarch32.dir/cpu_idle.S.obj
[56/273] Building C object zephyr/arch/arch/arm/core/aarch32/CMakeFiles/arch__arm__core__aarch32.dir/swap.c.obj
[57/273] Building C object zephyr/arch/common/CMakeFiles/arch__common.dir/sw_isr_common.c.obj
[58/273] Building ASM object zephyr/arch/arch/arm/core/aarch32/CMakeFiles/arch__arm__core__aarch32.dir/nmi_on_reset.S.obj
[59/273] Building C object zephyr/CMakeFiles/zephyr.dir/C_/ncs/v1.8.0/modules/crypto/tinycrypt/lib/source/ecc.c.obj
[60/273] Building C object zephyr/arch/arch/arm/core/aarch32/CMakeFiles/arch__arm__core__aarch32.dir/thread.c.obj
[61/273] Building ASM object zephyr/arch/arch/arm/core/aarch32/cortex_m/CMakeFiles/arch__arm__core__aarch32__cortex_m.dir/fault_s.S.obj
[62/273] Building C object zephyr/arch/common/CMakeFiles/isr_tables.dir/isr_tables.c.obj
[63/273] Building C object zephyr/arch/arch/arm/core/aarch32/CMakeFiles/arch__arm__core__aarch32.dir/irq_manage.c.obj
[64/273] Building C object zephyr/arch/arch/arm/core/aarch32/CMakeFiles/arch__arm__core__aarch32.dir/nmi.c.obj
[65/273] Building ASM object zephyr/arch/arch/arm/core/aarch32/cortex_m/CMakeFiles/arch__arm__core__aarch32__cortex_m.dir/exc_exit.S.obj
[66/273] Building C object zephyr/arch/arch/arm/core/aarch32/CMakeFiles/arch__arm__core__aarch32.dir/fatal.c.obj
[67/273] Building C object zephyr/arch/arch/arm/core/aarch32/CMakeFiles/arch__arm__core__aarch32.dir/prep_c.c.obj
[68/273] Building ASM object zephyr/arch/arch/arm/core/aarch32/cortex_m/CMakeFiles/arch__arm__core__aarch32__cortex_m.dir/vector_table.S.obj
[69/273] Building ASM object zephyr/arch/arch/arm/core/aarch32/cortex_m/CMakeFiles/arch__arm__core__aarch32__cortex_m.dir/reset.S.obj
[70/273] Building C object zephyr/arch/arch/arm/core/aarch32/cortex_m/CMakeFiles/arch__arm__core__aarch32__cortex_m.dir/irq_init.c.obj
[71/273] Building C object zephyr/arch/arch/arm/core/aarch32/cortex_m/CMakeFiles/arch__arm__core__aarch32__cortex_m.dir/fpu.c.obj
[72/273] Building C object zephyr/arch/arch/arm/core/aarch32/cortex_m/CMakeFiles/arch__arm__core__aarch32__cortex_m.dir/scb.c.obj
[73/273] Building C object zephyr/lib/libc/newlib/CMakeFiles/lib__libc__newlib.dir/libc-hooks.c.obj
[74/273] Building C object zephyr/arch/arch/arm/core/aarch32/cortex_m/CMakeFiles/arch__arm__core__aarch32__cortex_m.dir/thread_abort.c.obj
[75/273] Building C object modules/mcumgr/CMakeFiles/..__modules__lib__mcumgr.dir/util/src/mcumgr_util.c.obj
[76/273] Building C object zephyr/arch/arch/arm/core/aarch32/mpu/CMakeFiles/arch__arm__core__aarch32__mpu.dir/arm_core_mpu.c.obj
[77/273] Building C object modules/mcumgr/CMakeFiles/..__modules__lib__mcumgr.dir/smp/src/smp.c.obj
[78/273] Linking C static library zephyr\arch\common\libisr_tables.a
[79/273] Linking C static library zephyr\arch\arch\arm\core\aarch32\libarch__arm__core__aarch32.a
[80/273] Building C object modules/tinycbor/CMakeFiles/..__modules__lib__tinycbor__zephyr.dir/C_/ncs/v1.8.0/modules/lib/tinycbor/src/cbor_buf_reader.c.obj
[81/273] Building C object zephyr/arch/arch/arm/core/aarch32/mpu/CMakeFiles/arch__arm__core__aarch32__mpu.dir/arm_mpu.c.obj
[82/273] Building C object modules/tinycbor/CMakeFiles/..__modules__lib__tinycbor__zephyr.dir/C_/ncs/v1.8.0/modules/lib/tinycbor/src/cborerrorstrings.c.obj
[83/273] Building C object zephyr/arch/arch/arm/core/aarch32/cortex_m/CMakeFiles/arch__arm__core__aarch32__cortex_m.dir/fault.c.obj
[84/273] Linking C static library zephyr\lib\libc\newlib\liblib__libc__newlib.a
[85/273] Building C object modules/segger/CMakeFiles/modules__segger.dir/SEGGER_RTT_zephyr.c.obj
[86/273] Building C object modules/tinycbor/CMakeFiles/..__modules__lib__tinycbor__zephyr.dir/C_/ncs/v1.8.0/modules/lib/tinycbor/src/cbor_buf_writer.c.obj
[87/273] Building C object modules/tinycbor/CMakeFiles/..__modules__lib__tinycbor__zephyr.dir/C_/ncs/v1.8.0/modules/lib/tinycbor/src/cborencoder.c.obj
[88/273] Building C object modules/tinycbor/CMakeFiles/..__modules__lib__tinycbor__zephyr.dir/C_/ncs/v1.8.0/modules/lib/tinycbor/src/cborparser_dup_string.c.obj
[89/273] Building C object modules/segger/CMakeFiles/modules__segger.dir/C_/ncs/v1.8.0/modules/debug/segger/SEGGER/SEGGER_RTT.c.obj
[90/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/errno.c.obj
[91/273] Linking C static library zephyr\arch\arch\arm\core\aarch32\mpu\libarch__arm__core__aarch32__mpu.a
[92/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/main_weak.c.obj
[93/273] Linking C static library zephyr\arch\common\libarch__common.a
[94/273] Linking C static library zephyr\arch\arch\arm\core\aarch32\cortex_m\libarch__arm__core__aarch32__cortex_m.a
[95/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/banner.c.obj
[96/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/version.c.obj
[97/273] Building C object modules/tinycbor/CMakeFiles/..__modules__lib__tinycbor__zephyr.dir/C_/ncs/v1.8.0/modules/lib/tinycbor/src/cborparser.c.obj
[98/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/fatal.c.obj
[99/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/device.c.obj
[100/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/mem_slab.c.obj
[101/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/thread.c.obj
[102/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/kheap.c.obj
[103/273] Linking C static library modules\segger\libmodules__segger.a
[104/273] Linking C static library modules\tinycbor\lib..__modules__lib__tinycbor__zephyr.a
[105/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/init.c.obj
[106/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/system_work_q.c.obj
[107/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/idle.c.obj
[108/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/msg_q.c.obj
[109/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/mutex.c.obj
[110/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/pipes.c.obj
[111/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/sem.c.obj
[112/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/mailbox.c.obj
[113/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/xip.c.obj
[114/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/stack.c.obj
[115/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/queue.c.obj
[116/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/timer.c.obj
[117/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/timeout.c.obj
[118/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/condvar.c.obj
[119/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/poll.c.obj
[120/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/mempool.c.obj
[121/273] Building C object CMakeFiles/app.dir/src/main.c.obj
../src/main.c: In function 'main':
../src/main.c:352:57: warning: passing argument 1 of 'fsm_notifyBatteryStatus' discards 'volatile' qualifier from pointer target type [-Wdiscarded-qualifiers]
352 | uint8_t timerFlag = fsm_notifyBatteryStatus(&checkBatteryStatusFlag);
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from ../src/main.c:24:
../src/fsm.h:30:42: note: expected 'uint8_t *' {aka 'unsigned char *'} but argument is of type 'volatile uint8_t *' {aka 'volatile unsigned char *'}
30 | uint8_t fsm_notifyBatteryStatus(uint8_t *readyToNotify);
| ~~~~~~~~~^~~~~~~~~~~~~
[122/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/work.c.obj
[123/273] Building C object zephyr/kernel/CMakeFiles/kernel.dir/sched.c.obj
[124/273] Building C object CMakeFiles/app.dir/src/spi_wrapper.c.obj
[125/273] Building C object CMakeFiles/app.dir/src/i2c_wrapper.c.obj
[126/273] Building C object CMakeFiles/app.dir/src/nrf52Port.c.obj
../src/nrf52Port.c: In function 'nrf52Port_toggleLed1Blue':
../src/nrf52Port.c:182:9: warning: unused variable 'i' [-Wunused-variable]
182 | int i = gpio_pin_toggle(LEDGpioPort0, LED1_BLUE);
| ^
../src/nrf52Port.c: In function 'nrf52Port_toggleLed1Green':
../src/nrf52Port.c:188:9: warning: unused variable 'i' [-Wunused-variable]
188 | int i = gpio_pin_toggle(LEDGpioPort0, LED1_GREEN);
| ^
../src/nrf52Port.c: In function 'nrf52Port_toggleLed1Red':
../src/nrf52Port.c:194:9: warning: unused variable 'i' [-Wunused-variable]
194 | int i = gpio_pin_toggle(LEDGpioPort1, LED1_RED);
| ^
At top level:
../src/nrf52Port.c:64:13: warning: 'initResetGpio' defined but not used [-Wunused-function]
64 | static void initResetGpio(void)
| ^~~~~~~~~~~~~
[127/273] Building C object CMakeFiles/app.dir/src/bq25121.c.obj
[128/273] Building C object CMakeFiles/app.dir/src/Impedance.c.obj
[129/273] Building C object CMakeFiles/app.dir/src/SqrWaveVoltammetry.c.obj
../src/SqrWaveVoltammetry.c: In function 'RampDacRegUpdate':
../src/SqrWaveVoltammetry.c:469:5: warning: enumeration value 'SWV_STATE3' not handled in switch [-Wswitch]
469 | switch (AppSWVCfg.RampStateSWV)
| ^~~~~~
../src/SqrWaveVoltammetry.c:469:5: warning: enumeration value 'SWV_STATE4' not handled in switch [-Wswitch]
[130/273] Building C object CMakeFiles/app.dir/src/RampTest.c.obj
../src/RampTest.c: In function 'RampDacRegUpdate':
../src/RampTest.c:466:9: warning: enumeration value 'RAMP_STATE2' not handled in switch [-Wswitch]
466 | switch (AppRAMPCfg.RampState)
| ^~~~~~
../src/RampTest.c:466:9: warning: enumeration value 'RAMP_STATE3' not handled in switch [-Wswitch]
[131/273] Building C object CMakeFiles/app.dir/src/EEPROM.c.obj
[132/273] Building C object CMakeFiles/app.dir/src/parser.c.obj
[133/273] Building C object CMakeFiles/app.dir/src/uart_interface.c.obj
[134/273] Building C object CMakeFiles/app.dir/src/build_config.c.obj
[135/273] Building C object CMakeFiles/app.dir/src/ChronoAmperometric.c.obj
../src/ChronoAmperometric.c:25:1: warning: missing braces around initializer [-Wmissing-braces]
25 | {
| ^
......
48 | .RtiaCalValue = 0,
| {}
../src/ChronoAmperometric.c: In function 'AppCHRONOAMPTransientMeasureGen':
../src/ChronoAmperometric.c:314:169: warning: suggest parentheses around arithmetic in operand of '|' [-Wparentheses]
314 | AD5940_WriteReg(REG_AFE_LPDACDAT0, (uint32_t)((AppCHRONOAMPCfg.Vzero - 200) / DAC6BITVOLT_1LSB) << 12 | (int32_t)((AppCHRONOAMPCfg.SensorBias) / DAC12BITVOLT_1LSB) + VzeroCode * 64);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
[136/273] Building C object CMakeFiles/app.dir/src/AD5940_Temperature.c.obj
../src/AD5940_Temperature.c: In function 'AD5940_TempPlatformCfg':
../src/AD5940_Temperature.c:53:17: warning: unused variable 'gpio_cfg' [-Wunused-variable]
53 | AGPIOCfg_Type gpio_cfg;
| ^~~~~~~~
[137/273] Building C object CMakeFiles/app.dir/src/AFE_interface.c.obj
../src/AFE_interface.c:2083:37: warning: "/*" within comment [-Wcomment]
2083 | if (resultsCanBeTaken == 1) /*(typeOfmeasurement != M_RET_TYPE_PRINT_CYCLE) && (typeOfmeasurement != 0)*/
|
../src/AFE_interface.c:2061:22: warning: 'pImp' defined but not used [-Wunused-variable]
2061 | static fImpPol_Type *pImp;
| ^~~~
../src/AFE_interface.c:2059:14: warning: 'Re' defined but not used [-Wunused-variable]
2059 | static float Re = 0;
| ^~
../src/AFE_interface.c:2045:32: warning: 'IMPMeasurement' defined but not used [-Wunused-variable]
2045 | static AFE_ParametersStructure IMPMeasurement =
| ^~~~~~~~~~~~~~
../src/AFE_interface.c:2043:13: warning: 'startProcess' defined but not used [-Wunused-variable]
2043 | static bool startProcess = false;
| ^~~~~~~~~~~~
../src/AFE_interface.c:2041:17: warning: 'dataCounter' defined but not used [-Wunused-variable]
2041 | static uint16_t dataCounter = 0; //counter of samples of one measurement
| ^~~~~~~~~~~
../src/AFE_interface.c:2040:16: warning: 'typeOfmeasurement' defined but not used [-Wunused-variable]
2040 | static uint8_t typeOfmeasurement = 0;
| ^~~~~~~~~~~~~~~~~
../src/AFE_interface.c:1867:13: warning: 'initPlatformFirstTimeWithWriteReg' defined but not used [-Wunused-function]
1867 | static void initPlatformFirstTimeWithWriteReg(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/AFE_interface.c:1398:13: warning: 'setVoltagesToZero' defined but not used [-Wunused-function]
1398 | static void setVoltagesToZero(void)
| ^~~~~~~~~~~~~~~~~
../src/AFE_interface.c:1066:13: warning: 'AFEOpenAllSwitches' defined but not used [-Wunused-function]
1066 | static void AFEOpenAllSwitches(void)
| ^~~~~~~~~~~~~~~~~~
[138/273] Linking C static library zephyr\kernel\libkernel.a
[139/273] Building C object CMakeFiles/app.dir/src/usb.c.obj
../src/usb.c: In function 'usb_handler':
../src/usb.c:38:5: warning: enumeration value 'USB_DC_ERROR' not handled in switch [-Wswitch]
38 | switch (status)
| ^~~~~~
../src/usb.c:38:5: warning: enumeration value 'USB_DC_RESET' not handled in switch [-Wswitch]
../src/usb.c:38:5: warning: enumeration value 'USB_DC_CONFIGURED' not handled in switch [-Wswitch]
../src/usb.c:38:5: warning: enumeration value 'USB_DC_SUSPEND' not handled in switch [-Wswitch]
../src/usb.c:38:5: warning: enumeration value 'USB_DC_RESUME' not handled in switch [-Wswitch]
../src/usb.c:38:5: warning: enumeration value 'USB_DC_INTERFACE' not handled in switch [-Wswitch]
../src/usb.c:38:5: warning: enumeration value 'USB_DC_SET_HALT' not handled in switch [-Wswitch]
../src/usb.c:38:5: warning: enumeration value 'USB_DC_CLEAR_HALT' not handled in switch [-Wswitch]
../src/usb.c:38:5: warning: enumeration value 'USB_DC_SOF' not handled in switch [-Wswitch]
../src/usb.c:38:5: warning: enumeration value 'USB_DC_UNKNOWN' not handled in switch [-Wswitch]
../src/usb.c:49:9: warning: 'return' with a value, in function returning void [-Wreturn-type]
49 | return chargingStatus;
| ^~~~~~~~~~~~~~
../src/usb.c:36:13: note: declared here
36 | static void usb_handler(enum usb_dc_status_code status, const uint8_t *param)
| ^~~~~~~~~~~
../src/usb.c: In function 'interrupt_handler':
../src/usb.c:61:18: warning: unused variable 'rb_len' [-Wunused-variable]
61 | int recv_len, rb_len;
| ^~~~~~
../src/usb.c: In function 'USB_init':
../src/usb.c:80:11: warning: unused variable 'dtr' [-Wunused-variable]
80 | uint32_t dtr = 0U;
| ^~~
[140/273] Building C object CMakeFiles/app.dir/src/led.c.obj
../src/led.c:103:13: warning: 'resultNotValid' defined but not used [-Wunused-variable]
103 | static bool resultNotValid = true;
| ^~~~~~~~~~~~~~
../src/led.c:82:13: warning: 'toggleLedsBatteryTooLow' defined but not used [-Wunused-variable]
82 | static bool toggleLedsBatteryTooLow = false;
| ^~~~~~~~~~~~~~~~~~~~~~~
../src/led.c:16:13: warning: 'toggleLedGreenMeasurementInProgress' defined but not used [-Wunused-variable]
16 | static bool toggleLedGreenMeasurementInProgress = false;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/led.c:15:13: warning: 'toggleLedsPercent' defined but not used [-Wunused-variable]
15 | static bool toggleLedsPercent = false;
| ^~~~~~~~~~~~~~~~~
[141/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/cbprintf.c.obj
[142/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/crc32c_sw.c.obj
[143/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/crc7_sw.c.obj
[144/273] Building C object CMakeFiles/app.dir/src/ad5940.c.obj
../src/ad5940.c: In function 'AD5940_SoftRst':
../src/ad5940.c:2998:3: warning: implicit declaration of function 'printk'; did you mean 'printf'? [-Wimplicit-function-declaration]
2998 | printk("AFE Softrest Write Register successfull\n");
| ^~~~~~
| printf
../src/ad5940.c: In function 'AD5940_ADCPGACal':
../src/ad5940.c:3224:31: warning: 'HSDACCode' may be used uninitialized in this function [-Wmaybe-uninitialized]
3224 | hsloop_cfg.WgCfg.WgCode = HSDACCode;
| ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
[145/273] Building C object CMakeFiles/app.dir/src/led_controller.c.obj
../src/led_controller.c: In function 'batteryStatusHandler':
../src/led_controller.c:40:5: warning: implicit declaration of function 'batteryLedControl' [-Wimplicit-function-declaration]
40 | batteryLedControl(GetChargingInProgress(), GetBatteryCapacity());
| ^~~~~~~~~~~~~~~~~
../src/led_controller.c: At top level:
../src/led_controller.c:136:6: warning: conflicting types for 'batteryLedControl'
136 | void batteryLedControl(bool chargingStatus, uint8_t batteryCapacity)
| ^~~~~~~~~~~~~~~~~
../src/led_controller.c:40:5: note: previous implicit declaration of 'batteryLedControl' was here
40 | batteryLedControl(GetChargingInProgress(), GetBatteryCapacity());
| ^~~~~~~~~~~~~~~~~
[146/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/crc32_sw.c.obj
[147/273] Building C object zephyr/CMakeFiles/zephyr_prebuilt.dir/misc/empty_file.c.obj
[148/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/dec.c.obj
[149/273] Building C object CMakeFiles/app.dir/src/BLE_module.c.obj
../src/BLE_module.c: In function 'receiveCharacteristicReadCallback':
../src/BLE_module.c:224:50: warning: format '%s' expects argument of type 'char *', but argument 2 has type 'int' [-Wformat=]
224 | printk("transmitReadCallback: BleCb.transmit = %s\n", lastCommand);
| ~^ ~~~~~~~~~~~
| | |
| | int
| char *
| %d
../src/BLE_module.c: In function 'transmitCharacteristicReadCallback':
../src/BLE_module.c:250:2: warning: 'return' with no value, in function returning non-void [-Wreturn-type]
250 | return;
| ^~~~~~
../src/BLE_module.c:231:16: note: declared here
231 | static ssize_t transmitCharacteristicReadCallback(struct bt_conn *conn, const struct bt_gatt_attr *attr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/BLE_module.c: In function 'receiveCharacteristicWriteCallback':
../src/BLE_module.c:263:65: warning: format '%d' expects argument of type 'int', but argument 2 has type 'uint8_t *' {aka 'unsigned char *'} [-Wformat=]
263 | printk("\nReceive parameter write callback: recevied packet = %d \n", receivedValue);
| ~^ ~~~~~~~~~~~~~
| | |
| int uint8_t * {aka unsigned char *}
| %hhn
../src/BLE_module.c: In function 'BLE_sendTestResults':
../src/BLE_module.c:406:35: warning: format '%d' expects a matching 'int' argument [-Wformat=]
406 | printk("get recevied command = %d\n");
| ~^
| |
| int
../src/BLE_module.c: In function 'uIDInformationWriteCallback':
../src/BLE_module.c:594:5: warning: implicit declaration of function 'EEPROM_writeUIDInformation'; did you mean 'EEPROM_readUIDInformation'? [-Wimplicit-function-declaration]
594 | EEPROM_writeUIDInformation(&uIDInformation[0]);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
| EEPROM_readUIDInformation
../src/BLE_module.c: In function 'BLE_getDeviceName':
../src/BLE_module.c:605:9: warning: return discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
605 | return bt_get_name();
| ^~~~~~~~~~~~~
../src/BLE_module.c: In function 'receiveCharacteristicWriteCallback':
../src/BLE_module.c:305:1: warning: control reaches end of non-void function [-Wreturn-type]
305 | }
| ^
At top level:
../src/BLE_module.c:514:31: warning: 'auth_cb_display' defined but not used [-Wunused-variable]
514 | static struct bt_conn_auth_cb auth_cb_display = {
| ^~~~~~~~~~~~~~~
[150/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/crc8_sw.c.obj
[151/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/crc16_sw.c.obj
[152/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/cbprintf_packaged.c.obj
[153/273] Building C object CMakeFiles/app.dir/src/fsm.c.obj
../src/fsm.c: In function 'fsm_initReaderState':
../src/fsm.c:408:40: warning: passing argument 1 of 'EEPROM_readUIDInformation' from incompatible pointer type [-Wincompatible-pointer-types]
408 | status = EEPROM_readUIDInformation(&uIDInfo);
| ^~~~~~~~
| |
| char (*)[32]
In file included from ../src/fsm.c:21:
../src/EEPROM.h:187:37: note: expected 'char *' but argument is of type 'char (*)[32]'
187 | int EEPROM_readUIDInformation(char *UidInfo);
| ~~~~~~^~~~~~~
../src/fsm.c:465:35: warning: passing argument 2 of 'k_timer_init' from incompatible pointer type [-Wincompatible-pointer-types]
465 | k_timer_init(&inactvityTimer, inactivityShutDown, NULL);
| ^~~~~~~~~~~~~~~~~~
| |
| void (*)(void)
In file included from C:/ncs/v1.8.0/zephyr/include/zephyr.h:18,
from ../src/fsm.c:7:
C:/ncs/v1.8.0/zephyr/include/kernel.h:1379:22: note: expected 'k_timer_expiry_t' {aka 'void (*)(struct k_timer *)'} but argument is of type 'void (*)(void)'
1379 | k_timer_expiry_t expiry_fn,
| ~~~~~~~~~~~~~~~~~^~~~~~~~~
../src/fsm.c: In function 'fsm_standByBleConnectedState':
../src/fsm.c:549:9: warning: implicit declaration of function 'BLE_ClearTransmitReceivedCommand'; did you mean 'BLE_setTransmitReceivedCommand'? [-Wimplicit-function-declaration]
549 | BLE_ClearTransmitReceivedCommand();
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| BLE_setTransmitReceivedCommand
../src/fsm.c: In function 'fsm_readingFlashState':
../src/fsm.c:600:13: warning: implicit declaration of function 'EEPROM_resetReadIndex'; did you mean 'EEPROM_readWriteIndex'? [-Wimplicit-function-declaration]
600 | EEPROM_resetReadIndex();
| ^~~~~~~~~~~~~~~~~~~~~
| EEPROM_readWriteIndex
../src/fsm.c:601:13: warning: implicit declaration of function 'BLE_clearIndexCounter' [-Wimplicit-function-declaration]
601 | BLE_clearIndexCounter();
| ^~~~~~~~~~~~~~~~~~~~~
../src/fsm.c:602:13: warning: implicit declaration of function 'BLE_clearTestResultCommandFlag' [-Wimplicit-function-declaration]
602 | BLE_clearTestResultCommandFlag();
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/fsm.c:603:13: warning: implicit declaration of function 'BLE_clearPacketNumber' [-Wimplicit-function-declaration]
603 | BLE_clearPacketNumber();
| ^~~~~~~~~~~~~~~~~~~~~
../src/fsm.c: In function 'fsm_receivingParametersState':
../src/fsm.c:631:5: warning: enumeration value 'LeverLifted' not handled in switch [-Wswitch]
631 | switch (CassetteLeverStatus)
| ^~~~~~
../src/fsm.c: In function 'fsm_measuringState':
../src/fsm.c:739:9: warning: implicit declaration of function 'SetTemperatureForBLE' [-Wimplicit-function-declaration]
739 | SetTemperatureForBLE(temperature);
| ^~~~~~~~~~~~~~~~~~~~
../src/fsm.c: In function 'fsm_bleSendingDataState':
../src/fsm.c:860:22: warning: implicit declaration of function 'BLE_getRequestedPacketIndex' [-Wimplicit-function-declaration]
860 | if ((BLE_getRequestedPacketIndex()+1) > (measurementIndex + 1) * maxNumberOfPacketsPerElectrode)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/fsm.c:876:21: warning: implicit declaration of function 'BLE_setIndexCounter' [-Wimplicit-function-declaration]
876 | BLE_setIndexCounter(BLE_getRequestedPacketIndex() - (measurementIndex * maxNumberOfPacketsPerElectrode));
| ^~~~~~~~~~~~~~~~~~~
../src/fsm.c:886:47: warning: format '%d' expects argument of type 'int', but argument 2 has type 'uint8_t (*)(void)' {aka 'unsigned char (*)(void)'} [-Wformat=]
886 | printk("device status is %d compared to %d\n", BLE_getDeviceStatus, DS_SENTINEL_VALUE);
| ~^ ~~~~~~~~~~~~~~~~~~~
| | |
| int uint8_t (*)(void) {aka unsigned char (*)(void)}
../src/fsm.c: In function 'parser_ParseCommandsMethod':
../src/fsm.c:1003:23: warning: implicit declaration of function 'atoi' [-Wimplicit-function-declaration]
1003 | int icValue = atoi(token + 2);
| ^~~~
../src/fsm.c:1047:25: warning: implicit declaration of function 'EEPROM_writeUIDInformation'; did you mean 'EEPROM_readUIDInformation'? [-Wimplicit-function-declaration]
1047 | result = EEPROM_writeUIDInformation(&uIDInfo[0]);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
| EEPROM_readUIDInformation
../src/fsm.c: In function 'actionHandler':
../src/fsm.c:1102:18: warning: passing argument 1 of 'ReadPort' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
1102 | ReadPort(token, command);
| ^~~~~
../src/fsm.c:113:28: note: expected 'char *' but argument is of type 'const char *'
113 | static void ReadPort(char* token,CommandInfo* command);
| ~~~~~~^~~~~
../src/fsm.c:1106:22: warning: passing argument 1 of 'ReadRegister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
1106 | ReadRegister(token, command);
| ^~~~~
../src/fsm.c:115:32: note: expected 'char *' but argument is of type 'const char *'
115 | static void ReadRegister(char* token,CommandInfo* command);
| ~~~~~~^~~~~
../src/fsm.c:1110:20: warning: passing argument 1 of 'ReadMemory' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
1110 | ReadMemory(token, command);
| ^~~~~
../src/fsm.c:114:30: note: expected 'char *' but argument is of type 'const char *'
114 | static void ReadMemory(char* token,CommandInfo* command);
| ~~~~~~^~~~~
../src/fsm.c:1114:20: warning: passing argument 1 of 'ReadObject' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
1114 | ReadObject(token, command);
| ^~~~~
../src/fsm.c:116:30: note: expected 'char *' but argument is of type 'const char *'
116 | static void ReadObject(char* token,CommandInfo* command);
| ~~~~~~^~~~~
../src/fsm.c:1118:19: warning: passing argument 1 of 'WritePort' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
1118 | WritePort(token,command);
| ^~~~~
../src/fsm.c:109:29: note: expected 'char *' but argument is of type 'const char *'
109 | static void WritePort(char* token,CommandInfo* command);
| ~~~~~~^~~~~
../src/fsm.c:1122:23: warning: passing argument 1 of 'WriteRegister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
1122 | WriteRegister(token, command);
| ^~~~~
../src/fsm.c:111:33: note: expected 'char *' but argument is of type 'const char *'
111 | static void WriteRegister(char* token,CommandInfo* command);
| ~~~~~~^~~~~
../src/fsm.c:1126:21: warning: passing argument 1 of 'WriteMemory' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
1126 | WriteMemory(token, command);
| ^~~~~
../src/fsm.c:110:31: note: expected 'char *' but argument is of type 'const char *'
110 | static void WriteMemory(char* token,CommandInfo* command);
| ~~~~~~^~~~~
../src/fsm.c:1130:21: warning: passing argument 1 of 'WriteObject' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
1130 | WriteObject(token, command);
| ^~~~~
../src/fsm.c:112:31: note: expected 'char *' but argument is of type 'const char *'
112 | static void WriteObject(char* token,CommandInfo* command);
| ~~~~~~^~~~~
../src/fsm.c: In function 'WriteRegister':
../src/fsm.c:1263:78: warning: passing argument 3 of 'bq25121_writeRegister' makes integer from pointer without a cast [-Wint-conversion]
1263 | result = bq25121_writeRegister(&BQ25Dev, command->actionAddress, token);
| ^~~~~
| |
| char *
In file included from ../src/fsm.c:24:
../src/bq25121.h:173:73: note: expected 'uint8_t' {aka 'unsigned char'} but argument is of type 'char *'
173 | int bq25121_writeRegister(BQ25121_Device *dev, uint8_t address, uint8_t value);
| ~~~~~~~~^~~~~
../src/fsm.c: In function 'ReadMemory':
../src/fsm.c:1522:13: warning: unused variable 'temp' [-Wunused-variable]
1522 | uint8_t temp;
| ^~~~
At top level:
../src/fsm.c:140:16: warning: 'noMoreResultsInEEPROMFlag' defined but not used [-Wunused-variable]
140 | static uint8_t noMoreResultsInEEPROMFlag = 0; /*< signals when there is no more results in eeprom */
| ^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from c:\ncs\v1.8.0\toolchain\opt\arm-none-eabi\include\stdio.h:800,
from ../src/ad5940.h:18,
from ../src/AFE_interface.h:16,
from ../src/parser.h:16,
from ../src/BLE_module.h:33,
from ../src/fsm.c:19:
../src/fsm.c: In function 'sendvalidResponse':
../src/fsm.c:1635:46: warning: '%d' directive output may be truncated writing between 1 and 3 bytes into a region of size 2 [-Wformat-truncation=]
1635 | snprintf(bytesCount, sizeof(bytesCount), "%d", command->noOfBytes);
| ^~~~
../src/fsm.c:1635:47: note: format string is defined here
1635 | snprintf(bytesCount, sizeof(bytesCount), "%d", command->noOfBytes);
| ^~
In file included from c:\ncs\v1.8.0\toolchain\opt\arm-none-eabi\include\stdio.h:800,
from ../src/ad5940.h:18,
from ../src/AFE_interface.h:16,
from ../src/parser.h:16,
from ../src/BLE_module.h:33,
from ../src/fsm.c:19:
../src/fsm.c:1635:46: note: directive argument in the range [0, 255]
1635 | snprintf(bytesCount, sizeof(bytesCount), "%d", command->noOfBytes);
| ^~~~
../src/fsm.c:1635:5: note: '__builtin_snprintf' output between 2 and 4 bytes into a destination of size 2
1635 | snprintf(bytesCount, sizeof(bytesCount), "%d", command->noOfBytes);
| ^~~~~~~~
[154/273] Building C object zephyr/soc/arm/common/cortex_m/CMakeFiles/soc__arm__common__cortex_m.dir/arm_mpu_regions.c.obj
[155/273] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/fdtable.c.obj
[156/273] Building C object zephyr/lib/posix/CMakeFiles/lib__posix.dir/pthread_common.c.obj
[157/273] Building C object zephyr/lib/posix/CMakeFiles/lib__posix.dir/nanosleep.c.obj
[158/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/uuid.c.obj
[159/273] Building C object zephyr/subsys/bluetooth/common/CMakeFiles/subsys__bluetooth__common.dir/dummy.c.obj
[160/273] Building C object zephyr/subsys/bluetooth/common/CMakeFiles/subsys__bluetooth__common.dir/rpa.c.obj
[161/273] Building C object zephyr/soc/arm/nordic_nrf/nrf52/CMakeFiles/soc__arm__nordic_nrf__nrf52.dir/soc.c.obj
[162/273] Building C object zephyr/subsys/bluetooth/common/CMakeFiles/subsys__bluetooth__common.dir/log.c.obj
[163/273] Building C object zephyr/soc/arm/nordic_nrf/nrf52/CMakeFiles/soc__arm__nordic_nrf__nrf52.dir/power.c.obj
[164/273] Linking C static library app\libapp.a
[165/273] Linking C static library zephyr\soc\arm\common\cortex_m\libsoc__arm__common__cortex_m.a
[166/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/addr.c.obj
[167/273] Linking C static library zephyr\lib\posix\liblib__posix.a
[168/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/hci_ecc.c.obj
[169/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/settings.c.obj
[170/273] Linking C static library zephyr\libzephyr.a
[171/273] Linking C static library zephyr\subsys\bluetooth\common\libsubsys__bluetooth__common.a
[172/273] Linking C static library zephyr\soc\arm\nordic_nrf\nrf52\libsoc__arm__nordic_nrf__nrf52.a
[173/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/hci_common.c.obj
[174/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/buf.c.obj
[175/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/ecc.c.obj
[176/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/l2cap.c.obj
[177/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/adv.c.obj
[178/273] Building C object zephyr/subsys/mgmt/mcumgr/CMakeFiles/subsys__mgmt__mcumgr.dir/buf.c.obj
[179/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/id.c.obj
[180/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/keys.c.obj
[181/273] Building C object zephyr/subsys/mgmt/mcumgr/CMakeFiles/subsys__mgmt__mcumgr.dir/smp.c.obj
[182/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/conn.c.obj
[183/273] Building C object zephyr/subsys/mgmt/mcumgr/CMakeFiles/subsys__mgmt__mcumgr.dir/smp_bt.c.obj
[184/273] Building C object zephyr/subsys/dfu/boot/CMakeFiles/subsys__dfu__boot.dir/mcuboot.c.obj
[185/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/hci_core.c.obj
[186/273] Building C object zephyr/drivers/sensor/nrf5/CMakeFiles/drivers__sensor__nrf5.dir/temp_nrf5.c.obj
[187/273] Building C object zephyr/drivers/clock_control/CMakeFiles/drivers__clock_control.dir/clock_control_nrf.c.obj
[188/273] Building C object zephyr/subsys/random/CMakeFiles/subsys__random.dir/rand32_entropy_device.c.obj
[189/273] Building C object zephyr/subsys/net/CMakeFiles/subsys__net.dir/buf.c.obj
[190/273] Building C object zephyr/drivers/gpio/CMakeFiles/drivers__gpio.dir/gpio_nrfx.c.obj
[191/273] Linking C static library zephyr\subsys\mgmt\mcumgr\libsubsys__mgmt__mcumgr.a
[192/273] Linking C static library zephyr\drivers\clock_control\libdrivers__clock_control.a
[193/273] Building C object zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/i2c_nrfx_twi.c.obj
[194/273] Linking C static library zephyr\drivers\sensor\nrf5\libdrivers__sensor__nrf5.a
[195/273] Building C object zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/i2c_common.c.obj
[196/273] Linking C static library zephyr\subsys\dfu\boot\libsubsys__dfu__boot.a
[197/273] Linking C static library zephyr\subsys\net\libsubsys__net.a
[198/273] Building C object zephyr/drivers/console/CMakeFiles/drivers__console.dir/uart_console.c.obj
[199/273] Linking C static library zephyr\subsys\random\libsubsys__random.a
[200/273] Building C object zephyr/drivers/usb/device/CMakeFiles/drivers__usb__device.dir/usb_dc_nrfx.c.obj
[201/273] Linking C static library zephyr\drivers\gpio\libdrivers__gpio.a
[202/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/att.c.obj
[203/273] Building C object zephyr/drivers/hwinfo/CMakeFiles/drivers__hwinfo.dir/hwinfo_weak_impl.c.obj
[204/273] Linking C static library zephyr\drivers\i2c\libdrivers__i2c.a
[205/273] Linking C static library zephyr\drivers\console\libdrivers__console.a
[206/273] Building C object zephyr/drivers/flash/CMakeFiles/drivers__flash.dir/flash_page_layout.c.obj
[207/273] Building C object zephyr/drivers/hwinfo/CMakeFiles/drivers__hwinfo.dir/hwinfo_nrf.c.obj
[208/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/smp.c.obj
[209/273] Building C object zephyr/drivers/flash/CMakeFiles/drivers__flash.dir/soc_flash_nrf.c.obj
[210/273] Building C object zephyr/drivers/serial/CMakeFiles/drivers__serial.dir/__/__/misc/empty_file.c.obj
[211/273] Linking C static library zephyr\drivers\usb\device\libdrivers__usb__device.a
[212/273] Building C object zephyr/drivers/spi/CMakeFiles/drivers__spi.dir/spi_nrfx_spim.c.obj
[213/273] Building C object zephyr/drivers/spi/CMakeFiles/drivers__spi.dir/spi_nrfx_spi.c.obj
[214/273] Building C object zephyr/drivers/entropy/CMakeFiles/drivers__entropy.dir/entropy_nrf5.c.obj
[215/273] Linking C static library zephyr\drivers\flash\libdrivers__flash.a
[216/273] Building C object zephyr/drivers/timer/CMakeFiles/drivers__timer.dir/sys_clock_init.c.obj
[217/273] Linking C static library zephyr\drivers\hwinfo\libdrivers__hwinfo.a
[218/273] Building C object modules/nrf/lib/multithreading_lock/CMakeFiles/..__nrf__lib__multithreading_lock.dir/multithreading_lock.c.obj
[219/273] Building C object zephyr/drivers/serial/CMakeFiles/drivers__serial.dir/uart_nrfx_uarte.c.obj
[220/273] Building C object zephyr/drivers/timer/CMakeFiles/drivers__timer.dir/nrf_rtc_timer.c.obj
[221/273] Building C object modules/nrf/lib/fatal_error/CMakeFiles/..__nrf__lib__fatal_error.dir/fatal_error.c.obj
[222/273] Building C object zephyr/subsys/bluetooth/host/CMakeFiles/subsys__bluetooth__host.dir/gatt.c.obj
[223/273] Linking C static library zephyr\drivers\spi\libdrivers__spi.a
[224/273] Building C object modules/nrf/subsys/bluetooth/controller/CMakeFiles/..__nrf__subsys__bluetooth__controller.dir/crypto.c.obj
[225/273] Building C object modules/nrf/drivers/mpsl/clock_control/CMakeFiles/..__nrf__drivers__mpsl__clock_control.dir/nrfx_clock_mpsl.c.obj
[226/273] Linking C static library zephyr\drivers\timer\libdrivers__timer.a
[227/273] Building C object modules/nrf/subsys/bluetooth/controller/CMakeFiles/..__nrf__subsys__bluetooth__controller.dir/hci_internal.c.obj
[228/273] Linking C static library modules\nrf\lib\multithreading_lock\lib..__nrf__lib__multithreading_lock.a
[229/273] Building C object modules/nrf/subsys/mpsl/init/CMakeFiles/..__nrf__subsys__mpsl__init.dir/mpsl_init.c.obj
[230/273] Linking C static library zephyr\drivers\entropy\libdrivers__entropy.a
[231/273] Linking C static library zephyr\drivers\serial\libdrivers__serial.a
[232/273] Building C object modules/nrf/drivers/mpsl/flash_sync/CMakeFiles/..__nrf__drivers__mpsl__flash_sync.dir/flash_sync_mpsl.c.obj
[233/273] Building C object modules/nrf/subsys/bluetooth/controller/CMakeFiles/..__nrf__subsys__bluetooth__controller.dir/hci_driver.c.obj
[234/273] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v1.8.0/modules/hal/nordic/nrfx/mdk/system_nrf52833.c.obj
[235/273] Linking C static library modules\nrf\lib\fatal_error\lib..__nrf__lib__fatal_error.a
[236/273] Linking C static library zephyr\subsys\bluetooth\host\libsubsys__bluetooth__host.a
[237/273] Building C object modules/mcuboot/boot/bootutil/zephyr/CMakeFiles/mcuboot_util.dir/C_/ncs/v1.8.0/bootloader/mcuboot/boot/bootutil/src/bootutil_public.c.obj
[238/273] Linking C static library modules\nrf\subsys\mpsl\init\lib..__nrf__subsys__mpsl__init.a
[239/273] Linking C static library modules\nrf\drivers\mpsl\clock_control\lib..__nrf__drivers__mpsl__clock_control.a
[240/273] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/src/nrfx_systick.c.obj
[241/273] Linking C static library modules\nrf\subsys\bluetooth\controller\lib..__nrf__subsys__bluetooth__controller.a
[242/273] Linking C static library modules\nrf\drivers\mpsl\flash_sync\lib..__nrf__drivers__mpsl__flash_sync.a
[243/273] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/src/nrfx_nvmc.c.obj
[244/273] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/nrfx_glue.c.obj
[245/273] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/src/nrfx_power.c.obj
[246/273] Linking C static library modules\mcuboot\boot\bootutil\zephyr\libmcuboot_util.a
[247/273] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/src/nrfx_spi.c.obj
[248/273] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/src/nrfx_spim.c.obj
[249/273] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/src/nrfx_twi_twim.c.obj
[250/273] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/src/nrfx_gpiote.c.obj
[251/273] Building C object modules/mcumgr/CMakeFiles/..__modules__lib__mcumgr.dir/cmd/img_mgmt/port/zephyr/src/zephyr_img_mgmt_log.c.obj
[252/273] Building C object modules/mcumgr/CMakeFiles/..__modules__lib__mcumgr.dir/cmd/img_mgmt/src/img_mgmt_util.c.obj
[253/273] Building C object modules/mcumgr/CMakeFiles/..__modules__lib__mcumgr.dir/cmd/img_mgmt/src/img_mgmt.c.obj
[254/273] Building C object modules/mcumgr/CMakeFiles/..__modules__lib__mcumgr.dir/cmd/img_mgmt/src/img_mgmt_state.c.obj
[255/273] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/src/nrfx_ppi.c.obj
[256/273] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/src/nrfx_twi.c.obj
[257/273] Building C object modules/mcumgr/CMakeFiles/..__modules__lib__mcumgr.dir/cmd/os_mgmt/src/os_mgmt.c.obj
[258/273] Building C object modules/mcumgr/CMakeFiles/..__modules__lib__mcumgr.dir/cborattr/src/cborattr.c.obj
[259/273] Building C object modules/mcumgr/CMakeFiles/..__modules__lib__mcumgr.dir/cmd/os_mgmt/src/stubs.c.obj
[260/273] Building C object modules/mcumgr/CMakeFiles/..__modules__lib__mcumgr.dir/cmd/img_mgmt/port/zephyr/src/zephyr_img_mgmt.c.obj
[261/273] Building C object modules/mcumgr/CMakeFiles/..__modules__lib__mcumgr.dir/mgmt/src/mgmt.c.obj
[262/273] Building C object modules/mcumgr/CMakeFiles/..__modules__lib__mcumgr.dir/cmd/os_mgmt/port/zephyr/src/zephyr_os_mgmt.c.obj
[263/273] Linking C static library modules\mcumgr\lib..__modules__lib__mcumgr.a
[264/273] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/src/nrfx_usbd.c.obj
[265/273] Linking C static library modules\hal_nordic\nrfx\libmodules__hal_nordic__nrfx.a
[266/273] Linking C executable zephyr\zephyr_prebuilt.elf
[267/273] Generating linker.cmd
[268/273] Generating isr_tables.c, isrList.bin
[269/273] Generating dev_handles.c
[270/273] Building C object zephyr/CMakeFiles/zephyr_final.dir/misc/empty_file.c.obj
[271/273] Building C object zephyr/CMakeFiles/zephyr_final.dir/isr_tables.c.obj
[272/273] Building C object zephyr/CMakeFiles/zephyr_final.dir/dev_handles.c.obj
[273/273] Linking C executable zephyr\zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 241812 B 512 KB 46.12%
SRAM: 54803 B 128 KB 41.81%
IDT_LIST: 0 GB 2 KB 0.00%
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Flash: Asclepius_reader_nrf52833/build_debug (active)
Flashing build_debug to 261010810
C:\Windows\system32\cmd.exe /d /s /c "west flash -d c:\Users\voidn_l4qz259\Documents\GitHub\Eclateral\AsclepiusFirmware\Asclepius_reader_nrf52833\build_debug --snr 261010810"
-- west flash: rebuilding
ninja: no work to do.
-- west flash: using runner nrfjprog
-- runners.nrfjprog: Flashing file: c:\Users\voidn_l4qz259\Documents\GitHub\Eclateral\AsclepiusFirmware\Asclepius_reader_nrf52833\build_debug\zephyr\zephyr.hex
[error] [ Worker] - Access protection is enabled, can't read device version.
[error] [ Client] - Encountered error -90: Command read_device_info executed for 14 milliseconds with result -90
[error] [ Client] - Encountered error -90: Command read_memory_descriptors executed for 14 milliseconds with result -90
[error] [ Worker] - Can't read memory descriptors, ap-protection is enabled.
[error] [ Client] - Encountered error -90: Command erase_file executed for 61 milliseconds with result -90
[error] [ nRF52] - Failed while detecting device memory block protection status!
[error] [ nRF52] - Failed while erasing device. -90: Access protection is enabled, can't read device version.
[error] [ Worker] - Access protection is enabled, can't read device version.
ERROR: The operation attempted is unavailable due to readback protection in
ERROR: your device. Please use --recover to unlock the device.
NOTE: For additional output, try running again with logging enabled (--log).
NOTE: Any generated log error messages will be displayed.
ERROR: runners.nrfjprog: Flashing failed because the target must be recovered.
To fix, run "west flash --recover" instead.
Note: this will recover and erase all flash memory prior to reflashing.
FATAL ERROR: command exited with status 16: nrfjprog --program 'c:\Users\voidn_l4qz259\Documents\GitHub\Eclateral\AsclepiusFirmware\Asclepius_reader_nrf52833\build_debug\zephyr\zephyr.hex' --sectoranduicrerase -f NRF52 --snr 261010810
* The terminal process terminated with exit code: 16.
* Terminal will be reused by tasks, press any key to close it.
* Executing task: nRF Connect: Flash: Asclepius_reader_nrf52833/build_debug (active)
Flashing build_debug to 261010810
C:\Windows\system32\cmd.exe /d /s /c "west flash -d c:\Users\voidn_l4qz259\Documents\GitHub\Eclateral\AsclepiusFirmware\Asclepius_reader_nrf52833\build_debug --snr 261010810 --recover"
-- west flash: rebuilding
ninja: no work to do.
-- west flash: using runner nrfjprog
-- runners.nrfjprog: Recovering and erasing all flash memory.
Recovering device. This operation might take 30s.
Erasing user code and UICR flash areas.
Writing image to disable ap protect.
-- runners.nrfjprog: Flashing file: c:\Users\voidn_l4qz259\Documents\GitHub\Eclateral\AsclepiusFirmware\Asclepius_reader_nrf52833\build_debug\zephyr\zephyr.hex
[ #################### ] 6.636s | Erase file - Done erasing
[ #################### ] 1.470s | Program file - Done programming
WARNING: A programming operation has been performed without --verify.
WARNING: Programming can fail without error.
Enabling pin reset.
Applying pin reset.
-- runners.nrfjprog: Board with serial number 261010810 flashed successfully.
* Terminal will be reused by tasks, press any key to close it.
