Attachments (1) Download All
Nordic Case Info
  • Case ID: 341325
Options

Broadcast sink setup using nrf5340, facing build errors

Niketakumari Dubey



Attached error log snippet for the reference. 

Parents Reply Children
  • 0 in reply to Niketakumari Dubey

    updated SDK version to 2.9.0 and not able to get nrf into scan. configured CONFIG_TRANSPORT_BIS=y in the prj.conf file. want use nrf connect as broadcast sink.

  • 0 in reply to Niketakumari Dubey

    Hi,

    I tried to reproduce your issue but could not. I tried building the nRF5340 audio application for the Broadcast sink, as mentioned here:

    https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/applications/nrf5340_audio/doc/building.html#nrf53-audio-app-building-standard 

    But before building I set the  CONFIG_TRANSPORT_BIS=y in the prj.conf file.

    Did you follow the building process as per the link that I mentioned ? i.e. since you need to build using the command line using:

    west build -b nrf5340_audio_dk_nrf5340_cpuapp --pristine -- -DCONFIG_AUDIO_DEV=1

    if you are building for headset device, and using:

    west build -b nrf5340_audio_dk_nrf5340_cpuapp --pristine -- -DCONFIG_AUDIO_DEV=2

    if you are building for a gateway device.

    I tried with the v2.6.0. Could you try if you are able to build with this?

    -Priyanka

  • 0 in reply to Priyanka

    Can you please provide steps with the v2.9.0?

  • 0 in reply to Niketakumari Dubey

    Hi,

    I was able to build successfully for v2.9.0 as well.

    Could you first delete any existing build folders first?

    Please check python --version,

    nrfjprog --version and

    cmake --version, just to make sure that they are up to date.

    Then,

    1. Please try west update

        Followed by west zephyr-export

    2. After that, please set CONFIG_TRANSPORT_BIS=y in the prj.conf file.

    3. And then finally:

       west build -b nrf5340_audio_dk_nrf5340_cpuapp --pristine -- -DCONFIG_AUDIO_DEV=2

    You should be able to build successfully now.

    -Priyanka

  • 0 in reply to Priyanka

    when I executing west update command using terminal, facing it is asking to select any applications from the multiple options. means west command is not working.

Terms of service