simple gpio to control external FEM in NCS 2.7.0 & nrf5340

[lincoln-lu]

Hi Nordic team,

I am facing an issue about using simple gpio to control external FEM(custom FEM model) in NCS 2.7.0 & nrf5340.

Here is background:
1. Our project is using nRF5340, and based on NCS version before 2.7.0
2. For the network core, we copied NCS 2.6.1\zephyr\samples\bluetooth\hci_ipc, and modified a bit of code in oder to support simple gpio to control external FEM. by adding       macros and functions below:

CONFIG_MPSL_FEM=y

CONFIG_MPSL_FEM_POWER_MODEL=y

CONFIG_MPSL_FEM_SIMPLE_GPIO=y

CONFIG_MPSL_FEM_DEVICE_CONFIG_254=n

mpsl_fem_power_model_to_use_get()

model_fetch()

model_init()

3. it works fine on NCS 2.6.1, but it failed when I migrated it to NCS to 2.7.0 (still use 'no sysbuild', so net core child image is built from zephyr\samples\bluetooth\hci_ipc ). 
    The netcore always gets BUS Fault and crashes when app core wants to set RF power. see the UART log from net core

[00:00:16.316,131] ^[[0m<inf> hci_ipc: Sent message of 12 bytes.^[[0m
[00:00:16.319,763] ^[[0m<inf> hci_ipc: Received message of 6 bytes.^[[0m
[00:00:16.320,068] ^[[0m<inf> hci_ipc: Sent message of 7 bytes.^[[0m
[00:00:16.340,515] ^[[0m<inf> hci_ipc: Received message of 8 bytes.^[[0m
[00:00:16.340,606] ^[[1;31m<err> os: ***** BUS FAULT *****^[[0m
[00:00:16.340,637] ^[[1;31m<err> os:   Precise data bus error^[[0m
[00:00:16.340,637] ^[[1;31m<err> os:   BFAR Address: 0x1^[[0m
[00:00:16.340,667] ^[[1;31m<err> os: r0/a1:  0x0000000d  r1/a2:  0x80000000  r2/a3:  0x00000001^[[0m
[00:00:16.340,728] ^[[1;31m<err> os: r3/a4:  0x00000000 r12/ip:  0x0101ea1d r14/lr:  0x0101d1c9^[[0m
[00:00:16.340,728] ^[[1;31m<err> os:  xpsr:  0x81004400^[[0m
[00:00:16.340,728] ^[[1;31m<err> os: Faulting instruction address (r15/pc): 0x0101d1d4^[[0m
[00:00:16.340,789] ^[[1;31m<err> os: >>> ZEPHYR FATAL ERROR 25: Unknown error on CPU 0^[[0m
[00:00:16.340,820] ^[[1;31m<err> os: Current thread: 0x21002210 (HCI ipc TX)^[[0m
[00:00:16.439,147] ^[[1;31m<err> os: Halting system^[[0m

In oder to simplify the problem, I tried the NCS sample code under C:\ncs\v2.7.0\zephyr\samples\bluetooth\hci_pwr_ctrl on 5340DK, because in this sample, application code is also sending HCI cmd to net core to get/set RF power.  I observed lots of errors about the HCI command sending thru IPC  in function bt_hci_cmd_send_sync(),

Below is the UART log printed out from 5340DK app core:

*** Booting nRF Connect SDK v2.7.0-5cb85570ca43 ***
*** Using Zephyr OS v3.6.99-100befc70c74 ***
Starting Dynamic Tx Power Beacon Demo
Get Tx power level ->[00:00:00.445,922] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x0c03 timeout with err 0
--- 10 messages dropped ---
[00:00:00.451,751] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2018 timeout with err 0
[00:00:00.452,362] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2018 timeout with err 0
[00:00:00.454,895] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x0c33 timeout with err 0
[00:00:00.455,291] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x0c31 timeout with err 0
[00:00:00.455,657] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2003 timeout with err 0
[00:00:00.456,024] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2002 timeout with err 0
[00:00:00.456,390] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x201c timeout with err 0
[00:00:00.456,756] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x202f timeout with err 0
[00:00:00.457,122] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2024 timeout with err 0
[00:00:00.457,519] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2001 timeout with err 0
[00:00:00.457,885] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x0c01 timeout with err 0
[00:00:00.458,251] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc01 timeout with err 0
[00:00:00.458,282] <inf> bt_hci_core: HW Platform: Nordic Semiconductor (0x0002)
[00:00:00.458,312] <inf> bt_hci_core: HW Variant: nRF53x (0x0003)
[00:00:00.458,312] <inf> bt_hci_core: Firmware: Standard Bluetooth controller (0x00) Version 214.51162 Build 1926957230
[00:00:00.458,709] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc02 timeout with err 0
[00:00:00.459,106] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x1009 timeout with err 0
[00:00:00.459,472] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc09 timeout with err 0
[00:00:00.459,869] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2005 timeout with err 0
[00:00:00.460,021] <inf> bt_hci_core: Identity: F2:D1:8F:D5:69:8A (random)
[00:00:00.460,052] <inf> bt_hci_core: HCI: version 5.4 (0x0d) revision 0x21fb, manufacturer 0x0059
[00:00:00.460,083] <inf> bt_hci_core: LMP: version 5.4 (0x0d) subver 0x21fb
Bluetooth initialized
[00:00:00.460,540] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2006 timeout with err 0
[00:00:00.460,968] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2008 timeout with err 0
[00:00:00.461,364] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2009 timeout with err 0
[00:00:00.461,914] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x200a timeout with err 0
Dynamic Tx power Beacon started
Set Tx power level to 4
[00:00:05.446,838] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0
[00:00:05.446,868] <wrn> bt_hci_core: opcode 0xfc0e status 0x01
Set Tx power err: -5 reason 0x00
Get Tx power level -> [00:00:10.447,357] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0
[00:00:10.447,387] <wrn> bt_hci_core: opcode 0xfc0f status 0x01
Read Tx power err: -5 reason 0x00
TXP = -1
Set Tx power level to 0
[00:00:10.447,814] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0
[00:00:10.447,814] <wrn> bt_hci_core: opcode 0xfc0e status 0x01
Set Tx power err: -5 reason 0x00
Get Tx power level -> [00:00:15.448,364] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0
[00:00:15.448,364] <wrn> bt_hci_core: opcode 0xfc0f status 0x01
Read Tx power err: -5 reason 0x00
TXP = -1
Set Tx power level to -3
[00:00:15.448,791] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0
[00:00:15.448,822] <wrn> bt_hci_core: opcode 0xfc0e status 0x01
Set Tx power err: -5 reason 0x00
Get Tx power level -> [00:00:20.449,310] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0
[00:00:20.449,340] <wrn> bt_hci_core: opcode 0xfc0f status 0x01
Read Tx power err: -5 reason 0x00
TXP = -1
Set Tx power level to -8
[00:00:20.449,829] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0
[00:00:20.449,829] <wrn> bt_hci_core: opcode 0xfc0e status 0x01
Set Tx power err: -5 reason 0x00

Note: I used 'No sysbuild' in VsCode when building this sample so that net core child image is built from zephyr\samples\bluetooth\hci_ipc

Can you look at this issue?
If you need any more info, please let me know.

Thanks

[lincoln-lu]

• Here is the generated .config file for net core's hci_ipc child image, under C:\ncs\v2.7.0\zephyr\samples\bluetooth\hci_pwr_ctrl\build\hci_ipc\zephyr
  
  

  # CONFIG_INPUT is not set
  # CONFIG_WIFI is not set
  # CONFIG_MIPI_DSI is not set
  # CONFIG_MODEM is not set
  # CONFIG_UART_INTERRUPT_DRIVEN is not set
  # CONFIG_SPI is not set
  CONFIG_BT_HCI_ACL_FLOW_CONTROL=y
  CONFIG_BT_HCI_VS=y
  CONFIG_FLASH_LOAD_SIZE=0
  CONFIG_SRAM_SIZE=64
  CONFIG_FLASH_LOAD_OFFSET=0
  CONFIG_MBOX_NRFX_IPC=y
  CONFIG_BT_CTLR=y
  CONFIG_NUM_IRQS=30
  CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=32768
  CONFIG_FLASH_SIZE=256
  CONFIG_FLASH_BASE_ADDRESS=0x1000000
  CONFIG_MP_MAX_NUM_CPUS=1
  CONFIG_PLATFORM_SPECIFIC_INIT=y
  CONFIG_SYS_CLOCK_TICKS_PER_SEC=32768
  CONFIG_ROM_START_OFFSET=0
  CONFIG_PINCTRL=y
  CONFIG_BUILD_OUTPUT_BIN=y
  CONFIG_XIP=y
  CONFIG_MAIN_STACK_SIZE=512
  CONFIG_IDLE_STACK_SIZE=256
  CONFIG_HAS_FLASH_LOAD_OFFSET=y
  # CONFIG_SRAM_VECTOR_TABLE is not set
  CONFIG_CPU_HAS_ARM_MPU=y
  # CONFIG_COUNTER is not set
  # CONFIG_SHARED_INTERRUPTS is not set
  # CONFIG_PM_DEVICE is not set
  CONFIG_TICKLESS_KERNEL=y
  CONFIG_CLOCK_CONTROL_INIT_PRIORITY=30
  # CONFIG_USE_DT_CODE_PARTITION is not set
  CONFIG_HW_STACK_PROTECTION=y
  # CONFIG_CODE_DATA_RELOCATION_SRAM is not set
  CONFIG_SERIAL_INIT_PRIORITY=50
  CONFIG_GPIO=y
  CONFIG_SERIAL=y
  # CONFIG_CPU_HAS_CUSTOM_FIXED_SOC_MPU_REGIONS is not set
  CONFIG_TINYCRYPT=y
  # CONFIG_MBEDTLS is not set
  # CONFIG_MEMC is not set
  CONFIG_KERNEL_ENTRY="__start"
  # CONFIG_MULTI_LEVEL_INTERRUPTS is not set
  # CONFIG_DYNAMIC_INTERRUPTS is not set
  # CONFIG_CACHE is not set
  # CONFIG_LOG is not set
  # CONFIG_CODE_DATA_RELOCATION is not set
  CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
  CONFIG_DCACHE_LINE_SIZE=32
  CONFIG_GEN_IRQ_VECTOR_TABLE=y
  CONFIG_SOC="nrf5340"
  # CONFIG_RESET is not set
  CONFIG_ARCH_SW_ISR_TABLE_ALIGN=4
  CONFIG_NRF_RTC_TIMER=y
  # CONFIG_IPC_SERVICE_BACKEND_RPMSG_SHMEM_RESET is not set
  CONFIG_LOG_DOMAIN_NAME="net"
  CONFIG_BUILD_OUTPUT_HEX=y
  CONFIG_CLOCK_CONTROL=y
  CONFIG_ARCH_HAS_CUSTOM_BUSY_WAIT=y
  CONFIG_SOC_HAS_TIMING_FUNCTIONS=y
  # CONFIG_UART_USE_RUNTIME_CONFIGURE is not set
  # CONFIG_SYSCON is not set
  CONFIG_ENTROPY_INIT_PRIORITY=50
  CONFIG_GEN_ISR_TABLES=y
  CONFIG_GEN_IRQ_START_VECTOR=0
  CONFIG_GEN_SW_ISR_TABLE=y
  CONFIG_SRAM_OFFSET=0
  # CONFIG_REBOOT is not set
  # CONFIG_POWER_DOMAIN is not set
  CONFIG_CONSOLE=y
  CONFIG_SOC_SERIES="nrf53"
  CONFIG_ARCH_IRQ_VECTOR_TABLE_ALIGN=4
  CONFIG_ISR_STACK_SIZE=2048
  # CONFIG_SCHED_CPU_MASK is not set
  # CONFIG_WATCHDOG is not set
  CONFIG_ICACHE_LINE_SIZE=32
  CONFIG_PRIVILEGED_STACK_SIZE=1024
  
  #
  # Devicetree Info
  #
  CONFIG_DT_HAS_ARDUINO_HEADER_R3_ENABLED=y
  CONFIG_DT_HAS_ARM_ARMV8M_MPU_ENABLED=y
  CONFIG_DT_HAS_ARM_CORTEX_M33_ENABLED=y
  CONFIG_DT_HAS_ARM_V8M_NVIC_ENABLED=y
  CONFIG_DT_HAS_FIXED_PARTITIONS_ENABLED=y
  CONFIG_DT_HAS_GPIO_KEYS_ENABLED=y
  CONFIG_DT_HAS_GPIO_LEDS_ENABLED=y
  CONFIG_DT_HAS_MMIO_SRAM_ENABLED=y
  CONFIG_DT_HAS_NORDIC_MBOX_NRF_IPC_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_ACL_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_CCM_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_CLOCK_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_DPPIC_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_ECB_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_EGU_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_FICR_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_GPIO_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_GPIOTE_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_GPREGRET_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_IEEE802154_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_IPC_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_PINCTRL_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_POWER_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_RADIO_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_RNG_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_SWI_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_TEMP_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_UARTE_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_UICR_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_VMC_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF_WDT_ENABLED=y
  CONFIG_DT_HAS_NORDIC_NRF53_FLASH_CONTROLLER_ENABLED=y
  CONFIG_DT_HAS_SOC_NV_FLASH_ENABLED=y
  CONFIG_DT_HAS_ZEPHYR_BT_HCI_ENTROPY_ENABLED=y
  CONFIG_DT_HAS_ZEPHYR_IPC_OPENAMP_STATIC_VRINGS_ENABLED=y
  CONFIG_DT_HAS_ZEPHYR_MEMORY_REGION_ENABLED=y
  # end of Devicetree Info
  
  #
  # Modules
  #
  
  #
  # Available modules.
  #
  
  #
  # nrf (C:/ncs/v2.7.0/nrf)
  #
  CONFIG_MBOX=y
  CONFIG_NUM_METAIRQ_PRIORITIES=0
  # CONFIG_INIT_STACKS is not set
  CONFIG_MPSL_WORK_STACK_SIZE=1024
  # CONFIG_SHURE_QSPI_DMA_ENCRYPTION is not set
  # CONFIG_SHURE_QSPI_XIP_ENCRYPTION is not set
  
  #
  # Nordic nRF Connect
  #
  CONFIG_BOOT_BANNER_STRING="Booting nRF Connect SDK"
  CONFIG_WARN_EXPERIMENTAL=y
  CONFIG_BT_BUF_CMD_TX_COUNT=10
  CONFIG_INIT_ARCH_HW_AT_BOOT=y
  CONFIG_NORDIC_QSPI_NOR_FLASH_LAYOUT_PAGE_SIZE=2048
  # CONFIG_GETOPT is not set
  # CONFIG_NCS_SAMPLES_DEFAULTS is not set
  # CONFIG_NCS_SAMPLE_EMPTY_APP_CORE_CHILD_IMAGE is not set
  # CONFIG_NCS_SAMPLE_DTM_REMOTE_HCI_CHILD_IMAGE is not set
  
  #
  # Image build variants
  #
  # CONFIG_NCS_MCUBOOT_IN_BUILD is not set
  # end of Image build variants
  
  # CONFIG_NCS_SAMPLE_MCUMGR_BT_OTA_DFU_SPEEDUP is not set
  CONFIG_BT_BUF_ACL_TX_SIZE=27
  CONFIG_BT_BUF_ACL_RX_SIZE=27
  CONFIG_BT_CTLR_DATA_LENGTH_MAX=27
  
  #
  # Subsystems
  #
  
  #
  # Bootloader
  #
  # CONFIG_BUILD_S1_VARIANT is not set
  # CONFIG_SECURE_BOOT is not set
  CONFIG_PM_PARTITION_SIZE_PROVISION=0x280
  # CONFIG_B0_MIN_PARTITION_SIZE is not set
  CONFIG_PM_PARTITION_SIZE_B0_IMAGE=0x7800
  # CONFIG_IS_SECURE_BOOTLOADER is not set
  
  #
  # Secure Boot firmware validation
  #
  CONFIG_SB_VALIDATION_INFO_MAGIC=0x86518483
  CONFIG_SB_VALIDATION_POINTER_MAGIC=0x6919b47e
  CONFIG_SB_VALIDATION_INFO_CRYPTO_ID=1
  CONFIG_SB_VALIDATION_INFO_VERSION=2
  CONFIG_SB_VALIDATION_METADATA_OFFSET=0
  CONFIG_SB_VALIDATE_FW_HASH=y
  # end of Secure Boot firmware validation
  
  # CONFIG_SECURE_BOOT_STORAGE is not set
  # end of Bootloader
  
  #
  # Bluetooth Low Energy
  #
  CONFIG_BT_COMPANY_ID_NORDIC=0x0059
  CONFIG_BT_COMPANY_ID=0x0059
  CONFIG_BT_MAX_CONN=16
  CONFIG_BT_LL_SOFTDEVICE_HEADERS_INCLUDE=y
  CONFIG_BT_LL_SOFTDEVICE=y
  CONFIG_BT_CTLR_DF_SUPPORT=y
  
  #
  # SoftDevice Controller
  #
  CONFIG_BT_LL_SOFTDEVICE_BUILD_TYPE_LIB=y
  CONFIG_BT_HCI_TX_STACK_SIZE=1536
  CONFIG_BT_RX_STACK_SIZE=768
  # CONFIG_BT_CTLR_SDC_QOS_CHANNEL_SURVEY is not set
  # CONFIG_BT_CTLR_SDC_ALLOW_PARALLEL_SCANNING_AND_INITIATING is not set
  CONFIG_BT_CTLR_SDC_PERIPHERAL_COUNT=1
  # CONFIG_BT_CTLR_SDC_MAX_CONN_EVENT_LEN_DEFAULT_OVERRIDE is not set
  CONFIG_BT_CTLR_SDC_MAX_CONN_EVENT_LEN_DEFAULT=7500
  CONFIG_BT_CTLR_SDC_CONN_EVENT_EXTEND_DEFAULT=y
  CONFIG_BT_CTLR_SDC_CENTRAL_ACL_EVENT_SPACING_DEFAULT=7500
  # CONFIG_BT_CTLR_SDC_PERIODIC_ADV_EVENT_LEN_DEFAULT_OVERRIDE is not set
  CONFIG_BT_CTLR_SDC_PERIODIC_ADV_EVENT_LEN_DEFAULT=7500
  CONFIG_BT_CTLR_SDC_TX_PACKET_COUNT=3
  CONFIG_BT_CTLR_SDC_RX_PACKET_COUNT=2
  CONFIG_BT_CTLR_SDC_SCAN_BUFFER_COUNT=3
  CONFIG_BT_CTLR_SDC_PERIODIC_SYNC_BUFFER_COUNT=3
  CONFIG_BT_CTLR_SDC_RX_PRIO=6
  # CONFIG_BT_CTLR_DF is not set
  CONFIG_BT_LL_SOFTDEVICE_MULTIROLE=y
  CONFIG_BT_CTLR_FAL_SIZE=8
  CONFIG_BT_CTLR_ECDH_LIB_OBERON=y
  # CONFIG_BT_CTLR_ECDH_LIB_TINYCRYPT is not set
  CONFIG_BT_CTLR_ECDH_STACK_SIZE=900
  CONFIG_BT_CTLR_ECDH_IN_MPSL_WORK=y
  # CONFIG_BT_CTLR_SDC_EVENT_TRIGGER is not set
  CONFIG_BT_CTLR_SDC_BIG_RESERVED_TIME_US=1600
  CONFIG_BT_CTLR_SDC_CIG_RESERVED_TIME_US=1300
  CONFIG_BT_CTLR_SDC_CIS_SUBEVENT_LENGTH_US=0
  # end of SoftDevice Controller
  
  #
  # BLE Libraries
  #
  # CONFIG_BT_GATT_POOL is not set
  # CONFIG_BT_GATT_DM is not set
  # CONFIG_BT_ADV_PROV is not set
  # CONFIG_BT_SCAN is not set
  # CONFIG_BT_CONN_CTX is not set
  
  #
  # Bluetooth Services
  #
  # CONFIG_BT_AMS_CLIENT is not set
  # CONFIG_BT_ANCS_CLIENT is not set
  # CONFIG_BT_BAS_CLIENT is not set
  # CONFIG_BT_BMS is not set
  # CONFIG_BT_CTS_CLIENT is not set
  # CONFIG_BT_DFU_SMP is not set
  # CONFIG_BT_GATTP is not set
  # CONFIG_BT_HIDS is not set
  # CONFIG_BT_HOGP is not set
  # CONFIG_BT_LBS is not set
  # CONFIG_BT_NSMS is not set
  # CONFIG_BT_NUS is not set
  # CONFIG_BT_NUS_CLIENT is not set
  # CONFIG_BT_RSCS is not set
  # CONFIG_BT_THROUGHPUT is not set
  # CONFIG_BT_LATENCY is not set
  # CONFIG_BT_LATENCY_CLIENT is not set
  # CONFIG_BT_HRS_CLIENT is not set
  # CONFIG_BT_DDFS is not set
  # CONFIG_BT_MDS is not set
  # CONFIG_BT_CGMS is not set
  # CONFIG_BT_FAST_PAIR is not set
  CONFIG_SYSTEM_WORKQUEUE_PRIORITY=-1
  # end of Bluetooth Services
  
  #
  # BLE over nRF RPC
  #
  CONFIG_HEAP_MEM_POOL_SIZE=8192
  # CONFIG_BT_RPC_STACK is not set
  CONFIG_BT_CENTRAL=y
  CONFIG_BT_PERIPHERAL=y
  CONFIG_BT_OBSERVER=y
  CONFIG_BT_BROADCASTER=y
  CONFIG_BT_CONN=y
  CONFIG_BT_REMOTE_VERSION=y
  CONFIG_BT_PHY_UPDATE=y
  CONFIG_BT_DATA_LEN_UPDATE=y
  # CONFIG_BT_EXT_ADV is not set
  CONFIG_BT_BUF_ACL_TX_COUNT=7
  CONFIG_BT_BUF_ACL_RX_COUNT=6
  CONFIG_BT_BUF_EVT_RX_SIZE=68
  CONFIG_BT_BUF_EVT_RX_COUNT=10
  CONFIG_BT_BUF_EVT_DISCARDABLE_SIZE=43
  CONFIG_BT_BUF_CMD_TX_SIZE=65
  CONFIG_BT_HAS_HCI_VS=y
  # CONFIG_BT_HCI_VS_FATAL_ERROR is not set
  # CONFIG_BT_HCI_MESH_EXT is not set
  # CONFIG_BT_WAIT_NOP is not set
  CONFIG_BT_RPA=y
  CONFIG_BT_ASSERT=y
  CONFIG_BT_ASSERT_VERBOSE=y
  # CONFIG_BT_ASSERT_PANIC is not set
  CONFIG_BT_DEBUG_NONE=y
  # CONFIG_BT_DEBUG_LOG is not set
  # CONFIG_BT_DEBUG_MONITOR_UART is not set
  # CONFIG_BT_LONG_WQ is not set
  # CONFIG_BT_HCI_TX_STACK_SIZE_WITH_PROMPT is not set
  CONFIG_BT_HCI_TX_PRIO=7
  # CONFIG_BT_RECV_WORKQ_SYS is not set
  CONFIG_BT_RECV_WORKQ_BT=y
  CONFIG_BT_RX_PRIO=8
  CONFIG_BT_DRIVER_RX_HIGH_PRIO=6
  # CONFIG_BT_ECC is not set
  # CONFIG_BT_HOST_CCM is not set
  # CONFIG_BT_LOG_SNIFFER_INFO is not set
  # CONFIG_BT_TESTING is not set
  # CONFIG_BT_HCI_VS_EVT_USER is not set
  # end of BLE over nRF RPC
  # end of Bluetooth Low Energy
  
  #
  # DFU
  #
  # CONFIG_DFU_MULTI_IMAGE is not set
  # CONFIG_DFU_TARGET is not set
  # end of DFU
  
  # CONFIG_ESB is not set
  
  #
  # Peripheral CPU DFU (PCD)
  #
  # CONFIG_PCD is not set
  # CONFIG_PCD_APP is not set
  CONFIG_PCD_VERSION_PAGE_BUF_SIZE=2046
  # CONFIG_PCD_NET is not set
  # end of Peripheral CPU DFU (PCD)
  
  #
  # Networking
  #
  
  #
  # Application protocols
  #
  
  #
  # nRF Cloud
  #
  
  #
  # Client ID (nRF Cloud Device ID)
  #
  CONFIG_NRF_CLOUD_CLIENT_ID_SRC_COMPILE_TIME=y
  CONFIG_NRF_CLOUD_CLIENT_ID="my-client-id"
  # end of Client ID (nRF Cloud Device ID)
  
  # CONFIG_NRF_CLOUD_MQTT is not set
  # CONFIG_NRF_CLOUD_FOTA is not set
  CONFIG_FOTA_USE_NRF_CLOUD_SETTINGS_AREA=y
  CONFIG_FOTA_DL_TIMEOUT_MIN=15
  # CONFIG_NRF_CLOUD_FOTA_FULL_MODEM_UPDATE is not set
  # CONFIG_NRF_CLOUD_REST is not set
  # CONFIG_NRF_CLOUD_LOCATION_PARSE_ANCHORS is not set
  # CONFIG_NRF_CLOUD_ALERT is not set
  CONFIG_NRF_CLOUD_LOG_OUTPUT_LEVEL=1
  # CONFIG_NRF_CLOUD_LOG_INCLUDE_LEVEL_0 is not set
  CONFIG_NRF_CLOUD_LOG_BUF_SIZE=256
  # CONFIG_NRF_CLOUD_COAP is not set
  
  #
  # Send shadow info sections on initial connect (MQTT/CoAP)
  #
  # end of Send shadow info sections on initial connect (MQTT/CoAP)
  
  # CONFIG_NRF_CLOUD_GATEWAY is not set
  # end of nRF Cloud
  
  # CONFIG_REST_CLIENT is not set
  # CONFIG_DOWNLOAD_CLIENT is not set
  # CONFIG_AWS_IOT is not set
  # CONFIG_AWS_JOBS is not set
  # CONFIG_AZURE_IOT_HUB is not set
  
  #
  # Self-Registration (Zi ZHu Ce)
  #
  # end of Self-Registration (Zi ZHu Ce)
  
  # CONFIG_ICAL_PARSER is not set
  # CONFIG_FTP_CLIENT is not set
  # CONFIG_LWM2M_CLIENT_UTILS is not set
  # CONFIG_WIFI_CREDENTIALS is not set
  # CONFIG_WIFI_CREDENTIALS_STATIC is not set
  # CONFIG_MQTT_HELPER is not set
  # CONFIG_NRF_MCUMGR_SMP_CLIENT is not set
  # end of Application protocols
  # end of Networking
  
  #
  # NFC
  #
  # CONFIG_NFC_NDEF is not set
  # CONFIG_NFC_NDEF_PARSER is not set
  # CONFIG_NFC_NDEF_PAYLOAD_TYPE_COMMON is not set
  # CONFIG_NFC_T2T_PARSER is not set
  # CONFIG_NFC_T4T_NDEF_FILE is not set
  # CONFIG_NFC_T4T_ISODEP is not set
  # CONFIG_NFC_T4T_APDU is not set
  # CONFIG_NFC_T4T_CC_FILE is not set
  # CONFIG_NFC_T4T_HL_PROCEDURE is not set
  # CONFIG_NFC_PLATFORM is not set
  # CONFIG_NFC_TNEP_TAG is not set
  # CONFIG_NFC_TNEP_POLLER is not set
  # CONFIG_NFC_TNEP_CH is not set
  # end of NFC
  
  # CONFIG_APP_EVENT_MANAGER is not set
  # CONFIG_NRF_PROFILER is not set
  # CONFIG_FW_INFO is not set
  
  #
  # Debug
  #
  # CONFIG_CPU_LOAD is not set
  # CONFIG_PPI_TRACE is not set
  # end of Debug
  
  # CONFIG_SHELL_BT_NUS is not set
  # CONFIG_SHELL_IPC is not set
  
  #
  # Multiprotocol service layer (MPSL)
  #
  # CONFIG_MPSL_FEM_ONLY is not set
  CONFIG_MPSL_FEM_API_AVAILABLE=y
  # CONFIG_MPSL_FEM_DEVICE_CONFIG_254 is not set
  CONFIG_MPSL_THREAD_COOP_PRIO=6
  CONFIG_MPSL_TIMESLOT_SESSION_COUNT=0
  # CONFIG_MPSL_ASSERT_HANDLER is not set
  # CONFIG_MPSL_TRIGGER_IPC_TASK_ON_RTC_START is not set
  CONFIG_MPSL_LOW_PRIO_IRQN=26
  # CONFIG_MPSL_PIN_DEBUG is not set
  # end of Multiprotocol service layer (MPSL)
  
  #
  # Partition Manager
  #
  CONFIG_PARTITION_MANAGER_ENABLED=y
  CONFIG_FLASH_MAP_CUSTOM=y
  CONFIG_SRAM_BASE_ADDRESS=0x21000000
  
  #
  # Zephyr subsystem configurations
  #
  # end of Zephyr subsystem configurations
  
  #
  # NCS subsystem configurations
  #
  # CONFIG_PM_SINGLE_IMAGE is not set
  CONFIG_PM_EXTERNAL_FLASH_BASE=0
  CONFIG_PM_EXTERNAL_FLASH_PATH=""
  CONFIG_PM_EXTERNAL_FLASH_SIZE_BITS=0
  # CONFIG_PM_OVERRIDE_EXTERNAL_DRIVER_CHECK is not set
  CONFIG_PM_SRAM_BASE=0x21000000
  CONFIG_PM_SRAM_SIZE=0x10000
  # end of Partition Manager
  
  #
  # nRF RPC (Remote Procedure Call) library
  #
  # end of nRF RPC (Remote Procedure Call) library
  
  #
  # Full Modem Firmware Update Management(FMFU)
  #
  # end of Full Modem Firmware Update Management(FMFU)
  
  #
  # SUIT-based Firmware Update Management
  #
  CONFIG_MGMT_SUITFU_TRIGGER_UPDATE_RESET_DELAY_MS=100
  CONFIG_MGMT_SUITFU_AUTO_REGISTER_HANDLERS=y
  CONFIG_MGMT_SUITFU_GRP_IMG=y
  CONFIG_MGMT_SUITFU_IMAGE_NUMBER=0
  # CONFIG_MGMT_SUITFU_GRP_SUIT is not set
  # end of SUIT-based Firmware Update Management
  
  # CONFIG_CAF is not set
  
  #
  # Nordic IEEE 802.15.4
  #
  # end of Nordic IEEE 802.15.4
  
  # CONFIG_DM_MODULE is not set
  
  #
  # nRF Security
  #
  # CONFIG_NORDIC_SECURITY_BACKEND is not set
  # CONFIG_NRF_SECURITY is not set
  # CONFIG_PSA_WANT_GENERATE_RANDOM is not set
  # CONFIG_PSA_WANT_ALG_CTR_DRBG is not set
  # CONFIG_PSA_WANT_ALG_HMAC_DRBG is not set
  # CONFIG_PSA_WANT_KEY_TYPE_DERIVE is not set
  # CONFIG_PSA_WANT_KEY_TYPE_RAW_DATA is not set
  # CONFIG_PSA_WANT_KEY_TYPE_HMAC is not set
  # CONFIG_PSA_WANT_KEY_TYPE_PASSWORD is not set
  # CONFIG_PSA_WANT_KEY_TYPE_PASSWORD_HASH is not set
  # CONFIG_PSA_WANT_KEY_TYPE_PEPPER is not set
  # CONFIG_PSA_WANT_KEY_TYPE_AES is not set
  # CONFIG_PSA_WANT_KEY_TYPE_ARIA is not set
  # CONFIG_PSA_WANT_KEY_TYPE_DES is not set
  # CONFIG_PSA_WANT_KEY_TYPE_CAMELLIA is not set
  # CONFIG_PSA_WANT_KEY_TYPE_SM4 is not set
  # CONFIG_PSA_WANT_KEY_TYPE_ARC4 is not set
  # CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR is not set
  # CONFIG_PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY is not set
  # CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT is not set
  # CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT is not set
  # CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE is not set
  # CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE is not set
  # CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR is not set
  # CONFIG_PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY is not set
  # CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT is not set
  # CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT is not set
  # CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE is not set
  # CONFIG_PSA_WANT_KEY_TYPE_DH_KEY_PAIR is not set
  # CONFIG_PSA_WANT_KEY_TYPE_DH_PUBLIC_KEY is not set
  # CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_IMPORT is not set
  # CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_EXPORT is not set
  # CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_DERIVE is not set
  # CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR is not set
  # CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_PUBLIC_KEY is not set
  # CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_IMPORT is not set
  # CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_EXPORT is not set
  # CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_DERIVE is not set
  # CONFIG_PSA_WANT_KEY_TYPE_SRP_PUBLIC_KEY is not set
  # CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR is not set
  # CONFIG_PSA_WANT_ALG_CCM is not set
  # CONFIG_PSA_WANT_ALG_GCM is not set
  # CONFIG_PSA_WANT_ALG_CHACHA20_POLY1305 is not set
  # CONFIG_PSA_WANT_ALG_CBC_MAC is not set
  # CONFIG_PSA_WANT_ALG_CMAC is not set
  # CONFIG_PSA_WANT_ALG_HMAC is not set
  # CONFIG_PSA_WANT_ALG_SHA_1 is not set
  # CONFIG_PSA_WANT_ALG_SHA_224 is not set
  # CONFIG_PSA_WANT_ALG_SHA_384 is not set
  # CONFIG_PSA_WANT_ALG_SHA_512 is not set
  # CONFIG_PSA_WANT_ALG_SHA_512_224 is not set
  # CONFIG_PSA_WANT_ALG_SHA_512_256 is not set
  # CONFIG_PSA_WANT_ALG_SHA3_224 is not set
  # CONFIG_PSA_WANT_ALG_SHA3_256 is not set
  # CONFIG_PSA_WANT_ALG_SHA3_384 is not set
  # CONFIG_PSA_WANT_ALG_SHA3_512 is not set
  # CONFIG_PSA_WANT_ALG_SM3 is not set
  # CONFIG_PSA_WANT_ALG_SHAKE256_512 is not set
  # CONFIG_PSA_WANT_ALG_RIPEMD160 is not set
  # CONFIG_PSA_WANT_ALG_MD2 is not set
  # CONFIG_PSA_WANT_ALG_MD4 is not set
  # CONFIG_PSA_WANT_ALG_MD5 is not set
  # CONFIG_PSA_WANT_ALG_ECB_NO_PADDING is not set
  # CONFIG_PSA_WANT_ALG_CBC_NO_PADDING is not set
  # CONFIG_PSA_WANT_ALG_CBC_PKCS7 is not set
  # CONFIG_PSA_WANT_ALG_CFB is not set
  # CONFIG_PSA_WANT_ALG_CTR is not set
  # CONFIG_PSA_WANT_ALG_OFB is not set
  # CONFIG_PSA_WANT_ALG_XTS is not set
  # CONFIG_PSA_WANT_ALG_CCM_STAR_NO_TAG is not set
  # CONFIG_PSA_WANT_ALG_STREAM_CIPHER is not set
  # CONFIG_PSA_WANT_ALG_ECDH is not set
  # CONFIG_PSA_WANT_ALG_FFDH is not set
  # CONFIG_PSA_WANT_ALG_HKDF_EXTRACT is not set
  # CONFIG_PSA_WANT_ALG_HKDF_EXPAND is not set
  # CONFIG_PSA_WANT_ALG_ECDSA is not set
  # CONFIG_PSA_WANT_ALG_ECDSA_ANY is not set
  # CONFIG_PSA_WANT_ALG_DETERMINISTIC_ECDSA is not set
  # CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_160 is not set
  # CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_192 is not set
  # CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_224 is not set
  # CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_256 is not set
  # CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_320 is not set
  # CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_384 is not set
  # CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_512 is not set
  # CONFIG_PSA_WANT_ECC_MONTGOMERY_255 is not set
  # CONFIG_PSA_WANT_ECC_MONTGOMERY_448 is not set
  # CONFIG_PSA_WANT_ECC_TWISTED_EDWARDS_255 is not set
  # CONFIG_PSA_WANT_ECC_TWISTED_EDWARDS_448 is not set
  # CONFIG_PSA_WANT_ECC_SECP_K1_192 is not set
  # CONFIG_PSA_WANT_ECC_SECP_K1_224 is not set
  # CONFIG_PSA_WANT_ECC_SECP_K1_256 is not set
  # CONFIG_PSA_WANT_ECC_SECP_R1_192 is not set
  # CONFIG_PSA_WANT_ECC_SECP_R1_224 is not set
  # CONFIG_PSA_WANT_ECC_SECP_R1_256 is not set
  # CONFIG_PSA_WANT_ECC_SECP_R1_384 is not set
  # CONFIG_PSA_WANT_ECC_SECP_R1_521 is not set
  # CONFIG_PSA_WANT_ECC_SECP_R2_160 is not set
  # CONFIG_PSA_WANT_ECC_SECT_K1_163 is not set
  # CONFIG_PSA_WANT_ECC_SECT_K1_233 is not set
  # CONFIG_PSA_WANT_ECC_SECT_K1_239 is not set
  # CONFIG_PSA_WANT_ECC_SECT_K1_283 is not set
  # CONFIG_PSA_WANT_ECC_SECT_K1_409 is not set
  # CONFIG_PSA_WANT_ECC_SECT_K1_571 is not set
  # CONFIG_PSA_WANT_ECC_SECT_R1_163 is not set
  # CONFIG_PSA_WANT_ECC_SECT_R1_233 is not set
  # CONFIG_PSA_WANT_ECC_SECT_R1_283 is not set
  # CONFIG_PSA_WANT_ECC_SECT_R1_409 is not set
  # CONFIG_PSA_WANT_ECC_SECT_R1_571 is not set
  # CONFIG_PSA_WANT_ECC_SECT_R2_163 is not set
  # CONFIG_PSA_WANT_ECC_FRP_V1_256 is not set
  # CONFIG_PSA_WANT_ALG_RSA_OAEP is not set
  # CONFIG_PSA_WANT_ALG_RSA_PKCS1V15_CRYPT is not set
  # CONFIG_PSA_WANT_ALG_RSA_PKCS1V15_SIGN is not set
  # CONFIG_PSA_WANT_ALG_RSA_PKCS1V15_SIGN_RAW is not set
  # CONFIG_PSA_WANT_ALG_RSA_PSS is not set
  # CONFIG_PSA_WANT_ALG_RSA_PSS_ANY_SALT is not set
  # CONFIG_PSA_WANT_ALG_JPAKE is not set
  # CONFIG_PSA_WANT_ALG_SPAKE2P_HMAC is not set
  # CONFIG_PSA_WANT_ALG_SPAKE2P_CMAC is not set
  # CONFIG_PSA_WANT_ALG_SPAKE2P_MATTER is not set
  # CONFIG_PSA_WANT_ALG_SRP_6 is not set
  # CONFIG_PSA_WANT_ALG_SRP_PASSWORD_HASH is not set
  # CONFIG_PSA_WANT_ALG_PURE_EDDSA is not set
  # CONFIG_PSA_WANT_ALG_ED25519PH is not set
  # CONFIG_PSA_WANT_ALG_ED448PH is not set
  # end of nRF Security
  
  # CONFIG_NET_CORE_MONITOR is not set
  
  #
  # Audio Module
  #
  # CONFIG_AUDIO_MODULE_TEST is not set
  CONFIG_AUDIO_MODULE_NAME_SIZE=20
  # end of Audio Module
  
  # CONFIG_UART_ASYNC_ADAPTER is not set
  # CONFIG_TRUSTED_STORAGE is not set
  
  #
  # SUIT provisioning
  #
  # CONFIG_SUIT_MPI_GENERATE is not set
  # end of SUIT provisioning
  
  # CONFIG_SUIT is not set
  # CONFIG_DULT is not set
  # end of Subsystems
  
  # CONFIG_WPA_SUPP is not set
  CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE=-1
  CONFIG_POSIX_MAX_FDS=4
  # CONFIG_WFA_QT_CONTROL_APP is not set
  CONFIG_WFA_QT_THREAD_STACK_SIZE=4096
  CONFIG_WFA_QT_REBOOT_TIMEOUT_MS=1000
  CONFIG_WFA_QT_DEFAULT_INTERFACE="nordic_wlan0"
  CONFIG_WPAS_READY_TIMEOUT_MS=10000
  
  #
  # Libraries
  #
  
  #
  # Binary libraries
  #
  # end of Binary libraries
  
  # CONFIG_AT_MONITOR is not set
  # CONFIG_LTE_LINK_CONTROL is not set
  CONFIG_NRF_ACL_FLASH_REGION_SIZE=0x800
  CONFIG_FPROTECT_BLOCK_SIZE=0x800
  # CONFIG_FPROTECT is not set
  # CONFIG_AT_CMD_CUSTOM is not set
  # CONFIG_DK_LIBRARY is not set
  # CONFIG_AT_CMD_PARSER is not set
  # CONFIG_MODEM_INFO is not set
  CONFIG_MULTITHREADING_LOCK=y
  # CONFIG_RESET_ON_FATAL_ERROR is not set
  # CONFIG_SMS is not set
  # CONFIG_DATE_TIME is not set
  # CONFIG_HW_ID_LIBRARY is not set
  # CONFIG_WAVE_GEN_LIB is not set
  CONFIG_HW_UNIQUE_KEY_PARTITION_SIZE=0x800
  # CONFIG_MODEM_JWT is not set
  # CONFIG_LOCATION is not set
  # CONFIG_QOS is not set
  # CONFIG_SFLOAT is not set
  # CONFIG_CONTIN_ARRAY is not set
  # CONFIG_PCM_MIX is not set
  # CONFIG_TONE is not set
  # CONFIG_PSCM is not set
  # CONFIG_DATA_FIFO is not set
  # CONFIG_FEM_AL_LIB is not set
  # CONFIG_SAMPLE_RATE_CONVERTER is not set
  CONFIG_NCS_BOOT_BANNER=y
  CONFIG_NCS_NCS_BOOT_BANNER_STRING="nRF Connect SDK"
  CONFIG_NCS_ZEPHYR_BOOT_BANNER_STRING="Zephyr OS"
  # end of Libraries
  
  #
  # Device Drivers
  #
  # CONFIG_BT_DRIVER_QUIRK_NO_AUTO_DLE is not set
  # CONFIG_ETH_RTT is not set
  # CONFIG_SENSOR is not set
  # CONFIG_NRF_SW_LPUART is not set
  CONFIG_NRFX_GPIOTE_NUM_OF_EVT_HANDLERS=1
  # CONFIG_IPC_UART is not set
  # CONFIG_FLASH_RPC is not set
  CONFIG_CLOCK_CONTROL_MPSL=y
  CONFIG_SOC_FLASH_NRF_RADIO_SYNC_MPSL_TIMESLOT_SESSION_COUNT=0
  # end of Device Drivers
  
  #
  # External libraries
  #
  # end of External libraries
  
  #
  # Test
  #
  CONFIG_ZTEST_MULTICORE_DEFAULT_SETTINGS=y
  # CONFIG_UNITY is not set
  
  #
  # Mocks
  #
  # CONFIG_MOCK_NRF_MODEM_AT is not set
  # end of Mocks
  # end of Test
  # end of Nordic nRF Connect
  
  CONFIG_ZEPHYR_NRF_MODULE=y
  # end of nrf (C:/ncs/v2.7.0/nrf)
  
  #
  # mbedtls (C:/ncs/v2.7.0/modules/crypto/mbedtls)
  #
  CONFIG_ZEPHYR_MBEDTLS_MODULE=y
  
  #
  # PSA RNG support
  #
  # end of PSA RNG support
  
  #
  # PSA key type support
  #
  # end of PSA key type support
  
  #
  # PSA AEAD support
  #
  # end of PSA AEAD support
  
  #
  # PSA MAC support
  #
  # end of PSA MAC support
  
  #
  # PSA Hash support
  #
  # end of PSA Hash support
  
  #
  # PSA Cipher support
  #
  # end of PSA Cipher support
  
  #
  # PSA Key agreement support
  #
  # end of PSA Key agreement support
  
  #
  # PSA Key derivation support
  #
  # end of PSA Key derivation support
  
  #
  # PSA Asymmetric support
  #
  
  #
  # Elliptic Curve type support
  #
  # end of Elliptic Curve type support
  # end of PSA Asymmetric support
  # end of mbedtls (C:/ncs/v2.7.0/modules/crypto/mbedtls)
  
  #
  # oberon-psa-crypto (C:/ncs/v2.7.0/modules/crypto/oberon-psa-crypto)
  #
  CONFIG_ZEPHYR_OBERON_PSA_CRYPTO_MODULE=y
  # end of oberon-psa-crypto (C:/ncs/v2.7.0/modules/crypto/oberon-psa-crypto)
  
  #
  # trusted-firmware-m (C:/ncs/v2.7.0/modules/tee/tf-m/trusted-firmware-m)
  #
  # CONFIG_BOOTLOADER_MCUBOOT is not set
  CONFIG_ZEPHYR_TRUSTED_FIRMWARE_M_MODULE=y
  # end of trusted-firmware-m (C:/ncs/v2.7.0/modules/tee/tf-m/trusted-firmware-m)
  
  CONFIG_ZEPHYR_PSA_ARCH_TESTS_MODULE=y
  CONFIG_ZEPHYR_SOC_HWMV1_MODULE=y
  
  #
  # cjson (C:/ncs/v2.7.0/modules/lib/cjson)
  #
  # CONFIG_CJSON_LIB is not set
  CONFIG_ZEPHYR_CJSON_MODULE=y
  # end of cjson (C:/ncs/v2.7.0/modules/lib/cjson)
  
  #
  # azure-sdk-for-c (C:/ncs/v2.7.0/modules/lib/azure-sdk-for-c)
  #
  # CONFIG_AZURE_SDK is not set
  CONFIG_ZEPHYR_AZURE_SDK_FOR_C_MODULE=y
  # end of azure-sdk-for-c (C:/ncs/v2.7.0/modules/lib/azure-sdk-for-c)
  
  #
  # cirrus-logic (C:/ncs/v2.7.0/modules/hal/cirrus-logic)
  #
  # CONFIG_HW_CODEC_CIRRUS_LOGIC is not set
  CONFIG_ZEPHYR_CIRRUS_LOGIC_MODULE=y
  # end of cirrus-logic (C:/ncs/v2.7.0/modules/hal/cirrus-logic)
  
  #
  # openthread (C:/ncs/v2.7.0/modules/lib/openthread)
  #
  # CONFIG_OPENTHREAD is not set
  CONFIG_ZEPHYR_OPENTHREAD_MODULE=y
  # end of openthread (C:/ncs/v2.7.0/modules/lib/openthread)
  
  #
  # suit-generator (C:/ncs/v2.7.0/modules/lib/suit-generator)
  #
  CONFIG_SUIT_ENVELOPE_TEMPLATE=""
  CONFIG_SUIT_ENVELOPE_TARGET=""
  CONFIG_SUIT_ENVELOPE_OUTPUT_ARTIFACT="merged.hex"
  CONFIG_SUIT_ENVELOPE_OUTPUT_MPI_MERGE=y
  # CONFIG_SUIT_LOCAL_ENVELOPE_GENERATE is not set
  CONFIG_ZEPHYR_SUIT_GENERATOR_MODULE=y
  # end of suit-generator (C:/ncs/v2.7.0/modules/lib/suit-generator)
  
  #
  # suit-processor (C:/ncs/v2.7.0/modules/lib/suit-processor)
  #
  # CONFIG_SUIT_PROCESSOR is not set
  CONFIG_SUIT_PLATFORM_DRY_RUN_SUPPORT=y
  CONFIG_ZEPHYR_SUIT_PROCESSOR_MODULE=y
  # end of suit-processor (C:/ncs/v2.7.0/modules/lib/suit-processor)
  
  #
  # memfault-firmware-sdk (C:/ncs/v2.7.0/modules/lib/memfault-firmware-sdk)
  #
  # CONFIG_MEMFAULT is not set
  CONFIG_ZEPHYR_MEMFAULT_FIRMWARE_SDK_MODULE=y
  # end of memfault-firmware-sdk (C:/ncs/v2.7.0/modules/lib/memfault-firmware-sdk)
  
  #
  # coremark (C:/ncs/v2.7.0/modules/benchmark/coremark)
  #
  # CONFIG_COREMARK is not set
  CONFIG_ZEPHYR_COREMARK_MODULE=y
  # end of coremark (C:/ncs/v2.7.0/modules/benchmark/coremark)
  
  #
  # canopennode (C:/ncs/v2.7.0/modules/lib/canopennode)
  #
  CONFIG_ZEPHYR_CANOPENNODE_MODULE=y
  # end of canopennode (C:/ncs/v2.7.0/modules/lib/canopennode)
  
  #
  # chre (C:/ncs/v2.7.0/modules/lib/chre)
  #
  CONFIG_ZEPHYR_CHRE_MODULE=y
  # CONFIG_CHRE is not set
  # end of chre (C:/ncs/v2.7.0/modules/lib/chre)
  
  #
  # lz4 (C:/ncs/v2.7.0/modules/lib/lz4)
  #
  CONFIG_ZEPHYR_LZ4_MODULE=y
  # CONFIG_LZ4 is not set
  # end of lz4 (C:/ncs/v2.7.0/modules/lib/lz4)
  
  #
  # nanopb (C:/ncs/v2.7.0/modules/lib/nanopb)
  #
  CONFIG_ZEPHYR_NANOPB_MODULE=y
  # CONFIG_NANOPB is not set
  # end of nanopb (C:/ncs/v2.7.0/modules/lib/nanopb)
  
  CONFIG_ZEPHYR_TF_M_TESTS_MODULE=y
  
  #
  # zscilib (C:/ncs/v2.7.0/modules/lib/zscilib)
  #
  # CONFIG_ZSL is not set
  CONFIG_ZEPHYR_ZSCILIB_MODULE=y
  # end of zscilib (C:/ncs/v2.7.0/modules/lib/zscilib)
  
  #
  # cmsis (C:/ncs/v2.7.0/modules/hal/cmsis)
  #
  CONFIG_ZEPHYR_CMSIS_MODULE=y
  CONFIG_HAS_CMSIS_CORE=y
  CONFIG_HAS_CMSIS_CORE_M=y
  # CONFIG_CMSIS_M_CHECK_DEVICE_DEFINES is not set
  # end of cmsis (C:/ncs/v2.7.0/modules/hal/cmsis)
  
  #
  # cmsis-dsp (C:/ncs/v2.7.0/modules/lib/cmsis-dsp)
  #
  CONFIG_ZEPHYR_CMSIS_DSP_MODULE=y
  # CONFIG_CMSIS_DSP is not set
  # end of cmsis-dsp (C:/ncs/v2.7.0/modules/lib/cmsis-dsp)
  
  #
  # cmsis-nn (C:/ncs/v2.7.0/modules/lib/cmsis-nn)
  #
  CONFIG_ZEPHYR_CMSIS_NN_MODULE=y
  # CONFIG_CMSIS_NN is not set
  # end of cmsis-nn (C:/ncs/v2.7.0/modules/lib/cmsis-nn)
  
  #
  # fatfs (C:/ncs/v2.7.0/modules/fs/fatfs)
  #
  CONFIG_ZEPHYR_FATFS_MODULE=y
  # end of fatfs (C:/ncs/v2.7.0/modules/fs/fatfs)
  
  #
  # hal_nordic (C:/ncs/v2.7.0/modules/hal/nordic)
  #
  CONFIG_ZEPHYR_HAL_NORDIC_MODULE=y
  CONFIG_HAS_NORDIC_DRIVERS=y
  
  #
  # Nordic drivers
  #
  # CONFIG_NRF_802154_SOURCE_HAL_NORDIC is not set
  # CONFIG_NRF_802154_RADIO_DRIVER is not set
  # CONFIG_NRF_802154_SER_RADIO is not set
  # end of Nordic drivers
  
  CONFIG_HAS_NRFX=y
  
  #
  # nrfx drivers
  #
  CONFIG_MPSL=y
  # CONFIG_NRFX_CLOCK is not set
  CONFIG_NRFX_DPPI=y
  # CONFIG_NRFX_EGU0 is not set
  CONFIG_NRFX_GPIOTE=y
  CONFIG_NRFX_GPIOTE0=y
  CONFIG_NRFX_IPC=y
  # CONFIG_NRFX_NVMC is not set
  # CONFIG_NRFX_POWER is not set
  # CONFIG_NRFX_RNG is not set
  # CONFIG_NRFX_RTC0 is not set
  # CONFIG_NRFX_RTC1 is not set
  # CONFIG_NRFX_SPIM0 is not set
  # CONFIG_NRFX_SYSTICK is not set
  # CONFIG_NRFX_TEMP is not set
  # CONFIG_NRFX_TIMER0 is not set
  # CONFIG_NRFX_TIMER1 is not set
  # CONFIG_NRFX_TIMER2 is not set
  # CONFIG_NRFX_TWIM0 is not set
  # CONFIG_NRFX_UARTE0 is not set
  # CONFIG_NRFX_WDT0 is not set
  
  #
  # Peripheral Resource Sharing module
  #
  # CONFIG_NRFX_PRS_BOX_0 is not set
  # CONFIG_NRFX_PRS_BOX_1 is not set
  # CONFIG_NRFX_PRS_BOX_2 is not set
  # CONFIG_NRFX_PRS_BOX_3 is not set
  # CONFIG_NRFX_PRS_BOX_4 is not set
  # end of Peripheral Resource Sharing module
  # end of nrfx drivers
  # end of hal_nordic (C:/ncs/v2.7.0/modules/hal/nordic)
  
  #
  # hal_st (C:/ncs/v2.7.0/modules/hal/st)
  #
  CONFIG_ZEPHYR_HAL_ST_MODULE=y
  # end of hal_st (C:/ncs/v2.7.0/modules/hal/st)
  
  CONFIG_ZEPHYR_HAL_WURTHELEKTRONIK_MODULE=y
  CONFIG_ZEPHYR_LIBMETAL_MODULE=y
  
  #
  # liblc3 (C:/ncs/v2.7.0/modules/lib/liblc3)
  #
  CONFIG_ZEPHYR_LIBLC3_MODULE=y
  # end of liblc3 (C:/ncs/v2.7.0/modules/lib/liblc3)
  
  #
  # littlefs (C:/ncs/v2.7.0/modules/fs/littlefs)
  #
  CONFIG_ZEPHYR_LITTLEFS_MODULE=y
  # end of littlefs (C:/ncs/v2.7.0/modules/fs/littlefs)
  
  #
  # loramac-node (C:/ncs/v2.7.0/modules/lib/loramac-node)
  #
  CONFIG_ZEPHYR_LORAMAC_NODE_MODULE=y
  # CONFIG_HAS_SEMTECH_RADIO_DRIVERS is not set
  # end of loramac-node (C:/ncs/v2.7.0/modules/lib/loramac-node)
  
  #
  # lvgl (C:/ncs/v2.7.0/modules/lib/gui/lvgl)
  #
  CONFIG_ZEPHYR_LVGL_MODULE=y
  # end of lvgl (C:/ncs/v2.7.0/modules/lib/gui/lvgl)
  
  CONFIG_ZEPHYR_MIPI_SYS_T_MODULE=y
  CONFIG_ZEPHYR_NRF_HW_MODELS_MODULE=y
  CONFIG_ZEPHYR_OPEN_AMP_MODULE=y
  
  #
  # picolibc (C:/ncs/v2.7.0/modules/lib/picolibc)
  #
  # CONFIG_PICOLIBC_MODULE is not set
  CONFIG_ZEPHYR_PICOLIBC_MODULE=y
  # end of picolibc (C:/ncs/v2.7.0/modules/lib/picolibc)
  
  #
  # segger (C:/ncs/v2.7.0/modules/debug/segger)
  #
  CONFIG_ZEPHYR_SEGGER_MODULE=y
  CONFIG_HAS_SEGGER_RTT=y
  # CONFIG_USE_SEGGER_RTT is not set
  # end of segger (C:/ncs/v2.7.0/modules/debug/segger)
  
  CONFIG_ZEPHYR_TINYCRYPT_MODULE=y
  
  #
  # uoscore-uedhoc (C:/ncs/v2.7.0/modules/lib/uoscore-uedhoc)
  #
  CONFIG_ZEPHYR_UOSCORE_UEDHOC_MODULE=y
  # end of uoscore-uedhoc (C:/ncs/v2.7.0/modules/lib/uoscore-uedhoc)
  
  #
  # zcbor (C:/ncs/v2.7.0/modules/lib/zcbor)
  #
  CONFIG_ZEPHYR_ZCBOR_MODULE=y
  # CONFIG_ZCBOR is not set
  # end of zcbor (C:/ncs/v2.7.0/modules/lib/zcbor)
  
  #
  # mcuboot (C:/ncs/v2.7.0/bootloader/mcuboot)
  #
  
  #
  # MCUboot
  #
  CONFIG_BOOT_SIGNATURE_KEY_FILE=""
  CONFIG_DT_FLASH_WRITE_BLOCK_SIZE=4
  # end of MCUboot
  
  CONFIG_ZEPHYR_MCUBOOT_MODULE=y
  # end of mcuboot (C:/ncs/v2.7.0/bootloader/mcuboot)
  
  #
  # nrfxlib (C:/ncs/v2.7.0/nrfxlib)
  #
  
  #
  # Nordic nrfxlib
  #
  
  #
  # nrf_modem (Modem library)
  #
  # end of nrf_modem (Modem library)
  
  CONFIG_NRF_MODEM_SHMEM_CTRL_SIZE=0x4e8
  # CONFIG_NFC_T2T_NRFXLIB is not set
  # CONFIG_NFC_T4T_NRFXLIB is not set
  CONFIG_MPSL_BUILD_TYPE_LIB=y
  CONFIG_MPSL_LIB_DIR="cortex-m33+nodsp"
  CONFIG_MPSL_LIB_FLOAT_ABI_DIR="soft-float"
  
  #
  # Crypto libraries for nRF5x SOCs.
  #
  CONFIG_NRFXLIB_CRYPTO=y
  CONFIG_NRF_OBERON=y
  # CONFIG_NRF_CC310_BL is not set
  # end of Crypto libraries for nRF5x SOCs.
  
  # CONFIG_NRF_RPC is not set
  CONFIG_NRF_802154_SOURCE_NRFXLIB=y
  # CONFIG_GZLL is not set
  # CONFIG_NRF_DM is not set
  # CONFIG_NRF_FUEL_GAUGE is not set
  # end of Nordic nrfxlib
  
  CONFIG_ZEPHYR_NRFXLIB_MODULE=y
  # end of nrfxlib (C:/ncs/v2.7.0/nrfxlib)
  
  #
  # connectedhomeip (C:/ncs/v2.7.0/modules/lib/matter)
  #
  # CONFIG_CHIP is not set
  CONFIG_ZEPHYR_CONNECTEDHOMEIP_MODULE=y
  # end of connectedhomeip (C:/ncs/v2.7.0/modules/lib/matter)
  
  CONFIG_LIBMETAL=y
  CONFIG_LIBMETAL_SRC_PATH="libmetal"
  # CONFIG_LVGL is not set
  # CONFIG_HAS_MEC_HAL is not set
  # CONFIG_HAS_MPFS_HAL is not set
  # CONFIG_HAS_MEC5_HAL is not set
  CONFIG_OPENAMP=y
  CONFIG_OPENAMP_SRC_PATH="open-amp"
  CONFIG_OPENAMP_MASTER=y
  CONFIG_OPENAMP_SLAVE=y
  # CONFIG_MIPI_SYST_LIB is not set
  # CONFIG_HAS_TELINK_DRIVERS is not set
  # CONFIG_TINYCRYPT_CTR_PRNG is not set
  # CONFIG_TINYCRYPT_SHA256 is not set
  # CONFIG_TINYCRYPT_ECC_DH is not set
  # CONFIG_TINYCRYPT_ECC_DSA is not set
  CONFIG_TINYCRYPT_AES=y
  # CONFIG_TINYCRYPT_AES_CBC is not set
  # CONFIG_TINYCRYPT_AES_CTR is not set
  # CONFIG_TINYCRYPT_AES_CCM is not set
  # CONFIG_TINYCRYPT_AES_CMAC is not set
  # CONFIG_MCUBOOT_BOOTUTIL_LIB is not set
  # CONFIG_WIFI_NM_WPA_SUPPLICANT is not set
  
  #
  # Unavailable modules, please install those via the project manifest.
  #
  
  #
  # hal_gigadevice module not available.
  #
  
  #
  # Trusted-firmware-a module not available.
  #
  
  #
  # THRIFT module not available.
  #
  # CONFIG_ACPI is not set
  # end of Modules
  
  CONFIG_BOARD="nrf5340dk"
  CONFIG_BOARD_REVISION=""
  CONFIG_BOARD_TARGET="nrf5340dk/nrf5340/cpunet"
  # CONFIG_NET_DRIVERS is not set
  CONFIG_BOARD_NRF5340DK=y
  CONFIG_BOARD_NRF5340DK_NRF5340_CPUNET=y
  CONFIG_BOARD_QUALIFIERS="nrf5340/cpunet"
  
  #
  # Board Options
  #
  CONFIG_DOMAIN_CPUAPP_BOARD="nrf5340dk/nrf5340/cpuapp"
  # end of Board Options
  
  #
  # Hardware Configuration
  #
  CONFIG_SOC_FAMILY="nordic_nrf"
  CONFIG_SOC_FAMILY_NORDIC_NRF=y
  CONFIG_SOC_SERIES_NRF53X=y
  CONFIG_SOC_NRF5340_CPUNET=y
  CONFIG_SOC_NRF5340_CPUNET_QKAA=y
  # CONFIG_MFD is not set
  # CONFIG_BUILD_OUTPUT_INFO_HEADER is not set
  CONFIG_HAS_HW_NRF_ACL=y
  CONFIG_HAS_HW_NRF_CCM=y
  CONFIG_HAS_HW_NRF_CCM_LFLEN_8BIT=y
  CONFIG_HAS_HW_NRF_CCM_HEADERMASK=y
  CONFIG_HAS_HW_NRF_CLOCK=y
  CONFIG_HAS_HW_NRF_DPPIC=y
  CONFIG_HAS_HW_NRF_ECB=y
  CONFIG_HAS_HW_NRF_EGU0=y
  CONFIG_HAS_HW_NRF_GPIO0=y
  CONFIG_HAS_HW_NRF_GPIO1=y
  CONFIG_HAS_HW_NRF_GPIOTE0=y
  CONFIG_HAS_HW_NRF_IPC=y
  CONFIG_HAS_HW_NRF_NVMC_PE=y
  CONFIG_HAS_HW_NRF_POWER=y
  CONFIG_HAS_HW_NRF_RADIO_BLE_2M=y
  CONFIG_HAS_HW_NRF_RADIO_BLE_CODED=y
  CONFIG_HAS_HW_NRF_RADIO_DFE=y
  CONFIG_HAS_HW_NRF_RADIO_IEEE802154=y
  CONFIG_HAS_HW_NRF_RNG=y
  CONFIG_HAS_HW_NRF_SWI0=y
  CONFIG_HAS_HW_NRF_SWI1=y
  CONFIG_HAS_HW_NRF_SWI2=y
  CONFIG_HAS_HW_NRF_SWI3=y
  CONFIG_HAS_HW_NRF_TEMP=y
  CONFIG_HAS_HW_NRF_UARTE0=y
  CONFIG_HAS_HW_NRF_VMC=y
  CONFIG_HAS_HW_NRF_WDT0=y
  CONFIG_SOC_NRF53_ANOMALY_160_WORKAROUND_NEEDED=y
  CONFIG_SOC_NRF53_ANOMALY_160_WORKAROUND=y
  CONFIG_SOC_NRF53_ANOMALY_168_WORKAROUND=y
  CONFIG_SOC_NRF53_RTC_PRETICK=y
  CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_FROM_NET=10
  CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_TO_NET=11
  CONFIG_NRF_ENABLE_CACHE=y
  # CONFIG_NRF53_SYNC_RTC is not set
  CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT=0
  CONFIG_NRF_SOC_SECURE_SUPPORTED=y
  CONFIG_NRF_APPROTECT_USE_UICR=y
  # CONFIG_NRF_APPROTECT_LOCK is not set
  # CONFIG_NRF_APPROTECT_USER_HANDLING is not set
  # CONFIG_NRF_TRACE_PORT is not set
  CONFIG_GPIO_INIT_PRIORITY=40
  # end of Hardware Configuration
  
  CONFIG_SOC_COMPATIBLE_NRF=y
  CONFIG_SOC_COMPATIBLE_NRF53X=y
  CONFIG_SOC_COMPATIBLE_NRF5340_CPUNET=y
  CONFIG_ARCH="arm"
  CONFIG_ARCH_HAS_SINGLE_THREAD_SUPPORT=y
  # CONFIG_EXTRA_EXCEPTION_INFO is not set
  CONFIG_CPU_CORTEX=y
  CONFIG_KOBJECT_TEXT_AREA=256
  CONFIG_ARM_MPU=y
  CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE=32
  # CONFIG_MPU_ALLOW_FLASH_WRITE is not set
  
  #
  # ARM Options
  #
  CONFIG_ARM_ON_ENTER_CPU_IDLE_HOOK=y
  CONFIG_ARM_ON_ENTER_CPU_IDLE_PREPARE_HOOK=y
  CONFIG_ARM_ON_EXIT_CPU_IDLE=y
  CONFIG_CPU_CORTEX_M=y
  # CONFIG_ARM_ZIMAGE_HEADER is not set
  CONFIG_ISA_THUMB2=y
  CONFIG_ASSEMBLER_ISA_THUMB2=y
  CONFIG_COMPILER_ISA_THUMB2=y
  CONFIG_STACK_ALIGN_DOUBLE_WORD=y
  # CONFIG_RUNTIME_NMI is not set
  CONFIG_FAULT_DUMP=2
  CONFIG_BUILTIN_STACK_GUARD=y
  CONFIG_ARM_STACK_PROTECTION=y
  CONFIG_FP16=y
  CONFIG_FP16_IEEE=y
  # CONFIG_FP16_ALT is not set
  CONFIG_CPU_CORTEX_M33=y
  CONFIG_CPU_CORTEX_M_HAS_SYSTICK=y
  CONFIG_CPU_CORTEX_M_HAS_DWT=y
  CONFIG_CPU_CORTEX_M_HAS_BASEPRI=y
  CONFIG_CPU_CORTEX_M_HAS_VTOR=y
  CONFIG_CPU_CORTEX_M_HAS_SPLIM=y
  CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS=y
  CONFIG_CPU_CORTEX_M_HAS_CMSE=y
  CONFIG_ARMV7_M_ARMV8_M_MAINLINE=y
  CONFIG_ARMV8_M_MAINLINE=y
  
  #
  # ARM Cortex-M0/M0+/M1/M3/M4/M7/M23/M33/M55 options
  #
  CONFIG_ZERO_LATENCY_IRQS=y
  CONFIG_ZERO_LATENCY_LEVELS=1
  # CONFIG_SW_VECTOR_RELAY is not set
  # CONFIG_CORTEX_M_DWT is not set
  # CONFIG_CORTEX_M_DEBUG_MONITOR_HOOK is not set
  # CONFIG_TRAP_UNALIGNED_ACCESS is not set
  # end of ARM Cortex-M0/M0+/M1/M3/M4/M7/M23/M33/M55 options
  
  CONFIG_NULL_POINTER_EXCEPTION_DETECTION_NONE=y
  # CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT is not set
  # CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU is not set
  # CONFIG_MPU_STACK_GUARD is not set
  # CONFIG_MPU_DISABLE_BACKGROUND_MAP is not set
  # CONFIG_CUSTOM_SECTION_ALIGN is not set
  CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE=32
  CONFIG_HAS_SWO=y
  # end of ARM Options
  
  CONFIG_ARM=y
  CONFIG_ARCH_IS_SET=y
  
  #
  # General Architecture Options
  #
  # CONFIG_SEMIHOST is not set
  CONFIG_LITTLE_ENDIAN=y
  # CONFIG_USERSPACE is not set
  CONFIG_KOBJECT_DATA_AREA_RESERVE_EXTRA_PERCENT=100
  CONFIG_KOBJECT_RODATA_AREA_EXTRA_BYTES=16
  CONFIG_GEN_PRIV_STACKS=y
  # CONFIG_STACK_GROWS_UP is not set
  
  #
  # Interrupt Configuration
  #
  CONFIG_ISR_TABLES_LOCAL_DECLARATION_SUPPORTED=y
  # CONFIG_ISR_TABLES_LOCAL_DECLARATION is not set
  CONFIG_IRQ_VECTOR_TABLE_JUMP_BY_ADDRESS=y
  # CONFIG_IRQ_VECTOR_TABLE_JUMP_BY_CODE is not set
  CONFIG_EXCEPTION_DEBUG=y
  # CONFIG_SIMPLIFIED_EXCEPTION_CODES is not set
  # end of Interrupt Configuration
  # end of General Architecture Options
  
  CONFIG_ARCH_HAS_TIMING_FUNCTIONS=y
  CONFIG_ARCH_HAS_STACK_PROTECTION=y
  CONFIG_ARCH_HAS_USERSPACE=y
  CONFIG_ARCH_HAS_EXECUTABLE_PAGE_BIT=y
  CONFIG_ARCH_HAS_RAMFUNC_SUPPORT=y
  CONFIG_ARCH_HAS_NESTED_EXCEPTION_DETECTION=y
  CONFIG_ARCH_SUPPORTS_COREDUMP=y
  CONFIG_ARCH_SUPPORTS_ARCH_HW_INIT=y
  CONFIG_ARCH_SUPPORTS_ROM_START=y
  CONFIG_ARCH_HAS_EXTRA_EXCEPTION_INFO=y
  CONFIG_ARCH_HAS_THREAD_LOCAL_STORAGE=y
  CONFIG_ARCH_HAS_SUSPEND_TO_RAM=y
  CONFIG_ARCH_HAS_THREAD_ABORT=y
  CONFIG_ARCH_HAS_CODE_DATA_RELOCATION=y
  CONFIG_CPU_HAS_MPU=y
  CONFIG_MPU=y
  CONFIG_MPU_REQUIRES_NON_OVERLAPPING_REGIONS=y
  CONFIG_MPU_GAP_FILLING=y
  CONFIG_SRAM_REGION_PERMISSIONS=y
  
  #
  # DSP Options
  #
  # end of DSP Options
  
  #
  # Floating Point Options
  #
  # end of Floating Point Options
  
  #
  # Cache Options
  #
  # end of Cache Options
  
  CONFIG_TOOLCHAIN_HAS_BUILTIN_FFS=y
  # CONFIG_ARCH_CPU_IDLE_CUSTOM is not set
  
  #
  # General Kernel Options
  #
  CONFIG_MULTITHREADING=y
  CONFIG_NUM_COOP_PRIORITIES=16
  CONFIG_NUM_PREEMPT_PRIORITIES=15
  CONFIG_MAIN_THREAD_PRIORITY=0
  CONFIG_COOP_ENABLED=y
  CONFIG_PREEMPT_ENABLED=y
  CONFIG_PRIORITY_CEILING=-127
  # CONFIG_SCHED_DEADLINE is not set
  CONFIG_THREAD_STACK_INFO=y
  # CONFIG_THREAD_CUSTOM_DATA is not set
  # CONFIG_DYNAMIC_THREAD is not set
  CONFIG_SCHED_DUMB=y
  # CONFIG_SCHED_SCALABLE is not set
  # CONFIG_SCHED_MULTIQ is not set
  # CONFIG_WAITQ_SCALABLE is not set
  CONFIG_WAITQ_DUMB=y
  
  #
  # Misc Kernel related options
  #
  CONFIG_LIBC_ERRNO=y
  CONFIG_ERRNO=y
  CONFIG_CURRENT_THREAD_USE_TLS=y
  # end of Misc Kernel related options
  
  #
  # Kernel Debugging and Metrics
  #
  CONFIG_BOOT_DELAY=0
  # CONFIG_THREAD_MONITOR is not set
  # CONFIG_THREAD_NAME is not set
  # CONFIG_THREAD_RUNTIME_STATS is not set
  # end of Kernel Debugging and Metrics
  
  # CONFIG_OBJ_CORE is not set
  
  #
  # System Work Queue Options
  #
  # CONFIG_SYSTEM_WORKQUEUE_NO_YIELD is not set
  # end of System Work Queue Options
  
  #
  # Barrier Operations
  #
  CONFIG_BARRIER_OPERATIONS_ARCH=y
  # end of Barrier Operations
  
  #
  # Atomic Operations
  #
  CONFIG_ATOMIC_OPERATIONS_BUILTIN=y
  # end of Atomic Operations
  
  #
  # Timer API Options
  #
  CONFIG_TIMESLICING=y
  CONFIG_TIMESLICE_SIZE=0
  CONFIG_TIMESLICE_PRIORITY=0
  # CONFIG_TIMESLICE_PER_THREAD is not set
  # end of Timer API Options
  
  #
  # Other Kernel Object Options
  #
  CONFIG_POLL=y
  # CONFIG_MEM_SLAB_TRACE_MAX_UTILIZATION is not set
  CONFIG_NUM_MBOX_ASYNC_MSGS=10
  # CONFIG_EVENTS is not set
  # CONFIG_PIPES is not set
  CONFIG_KERNEL_MEM_POOL=y
  # CONFIG_HEAP_MEM_POOL_IGNORE_MIN is not set
  # end of Other Kernel Object Options
  
  CONFIG_ARCH_HAS_CUSTOM_SWAP_TO_MAIN=y
  CONFIG_SWAP_NONATOMIC=y
  CONFIG_SYS_CLOCK_EXISTS=y
  CONFIG_TIMEOUT_64BIT=y
  CONFIG_SYS_CLOCK_MAX_TIMEOUT_DAYS=365
  
  #
  # Security Options
  #
  # CONFIG_STACK_CANARIES is not set
  CONFIG_STACK_POINTER_RANDOM=0
  # end of Security Options
  
  #
  # Memory Domains
  #
  CONFIG_ARCH_MEM_DOMAIN_SUPPORTS_ISOLATED_STACKS=y
  CONFIG_MEM_DOMAIN_ISOLATED_STACKS=y
  # end of Memory Domains
  
  #
  # SMP Options
  #
  CONFIG_MP_NUM_CPUS=1
  # CONFIG_TICKET_SPINLOCKS is not set
  # end of SMP Options
  
  CONFIG_TOOLCHAIN_SUPPORTS_THREAD_LOCAL_STORAGE=y
  CONFIG_THREAD_LOCAL_STORAGE=y
  # end of General Kernel Options
  
  #
  # Device Options
  #
  # CONFIG_DEVICE_DEPS is not set
  # CONFIG_DEVICE_MUTABLE is not set
  # end of Device Options
  
  #
  # Initialization Priorities
  #
  CONFIG_KERNEL_INIT_PRIORITY_OBJECTS=30
  CONFIG_KERNEL_INIT_PRIORITY_DEFAULT=40
  CONFIG_KERNEL_INIT_PRIORITY_DEVICE=50
  CONFIG_APPLICATION_INIT_PRIORITY=90
  # end of Initialization Priorities
  
  #
  # Virtual Memory Support
  #
  # end of Virtual Memory Support
  
  #
  # Device Drivers
  #
  # CONFIG_ADC is not set
  # CONFIG_AUDIO is not set
  # CONFIG_AUXDISPLAY is not set
  # CONFIG_BBRAM is not set
  # CONFIG_CAN is not set
  # CONFIG_CHARGER is not set
  CONFIG_CLOCK_CONTROL_NRF_FORCE_ALT=y
  CONFIG_CLOCK_CONTROL_NRF=y
  # CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC is not set
  CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
  # CONFIG_CLOCK_CONTROL_NRF_K32SRC_SYNTH is not set
  # CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM is not set
  # CONFIG_CLOCK_CONTROL_NRF_K32SRC_250PPM is not set
  # CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM is not set
  # CONFIG_CLOCK_CONTROL_NRF_K32SRC_100PPM is not set
  # CONFIG_CLOCK_CONTROL_NRF_K32SRC_75PPM is not set
  CONFIG_CLOCK_CONTROL_NRF_K32SRC_50PPM=y
  # CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM is not set
  # CONFIG_CLOCK_CONTROL_NRF_K32SRC_20PPM is not set
  CONFIG_CLOCK_CONTROL_NRF_ACCURACY=50
  # CONFIG_CLOCK_CONTROL_FIXED_RATE_CLOCK is not set
  CONFIG_CONSOLE_INPUT_MAX_LINE_LEN=128
  CONFIG_CONSOLE_HAS_DRIVER=y
  # CONFIG_CONSOLE_HANDLER is not set
  CONFIG_CONSOLE_INIT_PRIORITY=60
  CONFIG_UART_CONSOLE=y
  # CONFIG_UART_CONSOLE_DEBUG_SERVER_HOOKS is not set
  # CONFIG_UART_CONSOLE_MCUMGR is not set
  # CONFIG_RAM_CONSOLE is not set
  # CONFIG_IPM_CONSOLE_SENDER is not set
  # CONFIG_IPM_CONSOLE_RECEIVER is not set
  # CONFIG_UART_MCUMGR is not set
  # CONFIG_GSM_MUX is not set
  # CONFIG_EFI_CONSOLE is not set
  # CONFIG_COREDUMP_DEVICE is not set
  # CONFIG_CRYPTO is not set
  # CONFIG_DAC is not set
  # CONFIG_DAI is not set
  # CONFIG_DISK_DRIVERS is not set
  # CONFIG_DISPLAY is not set
  # CONFIG_DMA is not set
  # CONFIG_EDAC is not set
  # CONFIG_EEPROM is not set
  CONFIG_ENTROPY_GENERATOR=y
  CONFIG_ENTROPY_NRF5_RNG=y
  # CONFIG_ENTROPY_NRF5_BIAS_CORRECTION is not set
  CONFIG_ENTROPY_NRF5_THR_POOL_SIZE=8
  CONFIG_ENTROPY_NRF5_THR_THRESHOLD=4
  CONFIG_ENTROPY_NRF5_ISR_POOL_SIZE=16
  CONFIG_ENTROPY_NRF5_ISR_THRESHOLD=12
  CONFIG_ENTROPY_HAS_DRIVER=y
  # CONFIG_ESPI is not set
  # CONFIG_FLASH is not set
  # CONFIG_FPGA is not set
  # CONFIG_FUEL_GAUGE is not set
  # CONFIG_GNSS is not set
  # CONFIG_GPIO_GET_DIRECTION is not set
  # CONFIG_GPIO_GET_CONFIG is not set
  # CONFIG_GPIO_HOGS is not set
  # CONFIG_GPIO_ENABLE_DISABLE_INTERRUPT is not set
  CONFIG_GPIO_NRFX=y
  CONFIG_GPIO_NRFX_INTERRUPT=y
  # CONFIG_HWINFO is not set
  # CONFIG_HWSPINLOCK is not set
  # CONFIG_I2C is not set
  # CONFIG_I2S is not set
  # CONFIG_I3C is not set
  
  #
  # Interrupt controller drivers
  #
  CONFIG_INTC_INIT_PRIORITY=40
  # CONFIG_INTC_ESP32 is not set
  # end of Interrupt controller drivers
  
  # CONFIG_IPM is not set
  # CONFIG_KSCAN is not set
  # CONFIG_LED is not set
  # CONFIG_LED_STRIP is not set
  # CONFIG_LORA is not set
  CONFIG_MBOX_INIT_PRIORITY=40
  # CONFIG_MDIO is not set
  # CONFIG_MIPI_DBI is not set
  
  #
  # Miscellaneous Drivers
  #
  # CONFIG_TIMEAWARE_GPIO is not set
  # end of Miscellaneous Drivers
  
  # CONFIG_MM_DRV is not set
  # CONFIG_PCIE is not set
  # CONFIG_PCIE_ENDPOINT is not set
  # CONFIG_PECI is not set
  CONFIG_PINCTRL_STORE_REG=y
  # CONFIG_PINCTRL_DYNAMIC is not set
  CONFIG_PINCTRL_NRF=y
  # CONFIG_PM_CPU_OPS is not set
  # CONFIG_PS2 is not set
  # CONFIG_PTP_CLOCK is not set
  # CONFIG_PWM is not set
  # CONFIG_REGULATOR is not set
  # CONFIG_RETAINED_MEM is not set
  # CONFIG_RTC is not set
  # CONFIG_SDHC is not set
  
  #
  # Capabilities
  #
  CONFIG_SERIAL_HAS_DRIVER=y
  CONFIG_SERIAL_SUPPORT_ASYNC=y
  CONFIG_SERIAL_SUPPORT_INTERRUPT=y
  # CONFIG_UART_ASYNC_API is not set
  # CONFIG_UART_LINE_CTRL is not set
  # CONFIG_UART_DRV_CMD is not set
  # CONFIG_UART_WIDE_DATA is not set
  # CONFIG_UART_PIPE is not set
  # CONFIG_UART_ASYNC_RX_HELPER is not set
  
  #
  # Serial Drivers
  #
  CONFIG_UART_NRFX=y
  CONFIG_UART_NRFX_UARTE=y
  CONFIG_UART_NRFX_UARTE_LEGACY_SHIM=y
  CONFIG_UART_0_ENHANCED_POLL_OUT=y
  # CONFIG_UART_0_NRF_PARITY_BIT is not set
  CONFIG_UART_0_NRF_TX_BUFFER_SIZE=32
  # CONFIG_SMBUS is not set
  
  #
  # Timer drivers
  #
  # CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME is not set
  # CONFIG_SYSTEM_CLOCK_SLOPPY_IDLE is not set
  CONFIG_SYSTEM_CLOCK_INIT_PRIORITY=0
  CONFIG_TICKLESS_CAPABLE=y
  CONFIG_SYSTEM_TIMER_HAS_DISABLE_SUPPORT=y
  CONFIG_NRF_RTC_TIMER_LOCK_ZERO_LATENCY_IRQS=y
  # CONFIG_NRF_RTC_TIMER_TRIGGER_OVERFLOW is not set
  # CONFIG_SYSTEM_CLOCK_NO_WAIT is not set
  # CONFIG_SYSTEM_CLOCK_WAIT_FOR_AVAILABILITY is not set
  CONFIG_SYSTEM_CLOCK_WAIT_FOR_STABILITY=y
  # end of Timer drivers
  
  # CONFIG_USB_BC12 is not set
  # CONFIG_UDC_DRIVER is not set
  # CONFIG_UHC_DRIVER is not set
  # CONFIG_UVB is not set
  # CONFIG_USB_DEVICE_DRIVER is not set
  # CONFIG_USBC_TCPC_DRIVER is not set
  # CONFIG_USBC_VBUS_DRIVER is not set
  # CONFIG_USBC_PPC_DRIVER is not set
  # CONFIG_VIDEO is not set
  # CONFIG_VIRTUALIZATION is not set
  # CONFIG_W1 is not set
  # end of Device Drivers
  
  # CONFIG_REQUIRES_FULL_LIBC is not set
  # CONFIG_REQUIRES_FLOAT_PRINTF is not set
  CONFIG_FULL_LIBC_SUPPORTED=y
  CONFIG_MINIMAL_LIBC_SUPPORTED=y
  CONFIG_NEWLIB_LIBC_SUPPORTED=y
  CONFIG_PICOLIBC_SUPPORTED=y
  
  #
  # C Library
  #
  # CONFIG_MINIMAL_LIBC is not set
  CONFIG_PICOLIBC=y
  # CONFIG_NEWLIB_LIBC is not set
  # CONFIG_EXTERNAL_LIBC is not set
  CONFIG_HAS_NEWLIB_LIBC_NANO=y
  CONFIG_COMMON_LIBC_ABORT=y
  CONFIG_COMMON_LIBC_MALLOC=y
  CONFIG_COMMON_LIBC_CALLOC=y
  CONFIG_COMMON_LIBC_REALLOCARRAY=y
  # CONFIG_PICOLIBC_USE_MODULE is not set
  CONFIG_PICOLIBC_USE_TOOLCHAIN=y
  CONFIG_PICOLIBC_HEAP_SIZE=-2
  # CONFIG_PICOLIBC_IO_FLOAT is not set
  CONFIG_PICOLIBC_IO_LONG_LONG=y
  CONFIG_STDOUT_CONSOLE=y
  CONFIG_NEED_LIBC_MEM_PARTITION=y
  # end of C Library
  
  #
  # C++ Language Support
  #
  # CONFIG_CPP is not set
  
  #
  # Deprecated
  #
  # CONFIG_CPLUSPLUS is not set
  # CONFIG_LIB_CPLUSPLUS is not set
  # end of Deprecated
  # end of C++ Language Support
  
  # CONFIG_CRC is not set
  
  #
  # Additional libraries
  #
  
  #
  # Hash Function Support
  #
  # CONFIG_SYS_HASH_FUNC32 is not set
  # end of Hash Function Support
  
  #
  # Hashmap (Hash Table) Support
  #
  # CONFIG_SYS_HASH_MAP is not set
  # end of Hashmap (Hash Table) Support
  
  #
  # Heap and Memory Allocation
  #
  # CONFIG_SYS_HEAP_VALIDATE is not set
  # CONFIG_SYS_HEAP_STRESS is not set
  # CONFIG_SYS_HEAP_INFO is not set
  CONFIG_SYS_HEAP_ALLOC_LOOPS=3
  # CONFIG_SYS_HEAP_RUNTIME_STATS is not set
  # CONFIG_SYS_HEAP_LISTENER is not set
  # CONFIG_SYS_HEAP_SMALL_ONLY is not set
  # CONFIG_SYS_HEAP_BIG_ONLY is not set
  CONFIG_SYS_HEAP_AUTO=y
  # CONFIG_MULTI_HEAP is not set
  # CONFIG_SHARED_MULTI_HEAP is not set
  # end of Heap and Memory Allocation
  
  #
  # Memory Blocks
  #
  # CONFIG_SYS_MEM_BLOCKS is not set
  # end of Memory Blocks
  
  #
  # OS Support Library
  #
  # CONFIG_FDTABLE is not set
  # CONFIG_PRINTK_SYNC is not set
  # CONFIG_MPSC_PBUF is not set
  # CONFIG_SPSC_PBUF is not set
  CONFIG_CBPRINTF_COMPLETE=y
  # CONFIG_CBPRINTF_NANO is not set
  CONFIG_CBPRINTF_FULL_INTEGRAL=y
  # CONFIG_CBPRINTF_REDUCED_INTEGRAL is not set
  # CONFIG_CBPRINTF_FP_SUPPORT is not set
  # CONFIG_CBPRINTF_FP_A_SUPPORT is not set
  # CONFIG_CBPRINTF_LIBC_SUBSTS is not set
  # CONFIG_CBPRINTF_PACKAGE_LONGDOUBLE is not set
  # CONFIG_CBPRINTF_STATIC_PACKAGE_CHECK_ALIGNMENT is not set
  CONFIG_CBPRINTF_CONVERT_CHECK_PTR=y
  # end of OS Support Library
  
  #
  # POSIX API Support
  #
  
  #
  # POSIX Options
  #
  # CONFIG_POSIX_API is not set
  # CONFIG_POSIX_ASYNCHRONOUS_IO is not set
  # CONFIG_POSIX_CLOCK is not set
  # CONFIG_POSIX_CONFSTR is not set
  # CONFIG_POSIX_ENV is not set
  # CONFIG_EVENTFD is not set
  
  #
  # File descriptor table options
  #
  # end of File descriptor table options
  
  # CONFIG_FNMATCH is not set
  # CONFIG_GETENTROPY is not set
  # CONFIG_POSIX_MQUEUE is not set
  
  #
  # sem_t support
  #
  CONFIG_SEM_VALUE_MAX=32767
  CONFIG_SEM_NAMELEN_MAX=16
  # end of sem_t support
  
  #
  # Signal support
  #
  CONFIG_POSIX_RTSIG_MAX=0
  # CONFIG_POSIX_SIGNAL is not set
  # end of Signal support
  
  # CONFIG_POSIX_PUTMSG is not set
  
  #
  # Sysconf support
  #
  # CONFIG_POSIX_SYSCONF is not set
  CONFIG_POSIX_PAGE_SIZE_BITS=6
  # end of Sysconf support
  
  # CONFIG_POSIX_SYSLOG is not set
  # CONFIG_TIMER is not set
  # CONFIG_POSIX_UNAME is not set
  # end of POSIX Options
  
  #
  # POSIX Shell Utilities
  #
  # end of POSIX Shell Utilities
  # end of POSIX API Support
  
  # CONFIG_OPENAMP_RSC_TABLE is not set
  # CONFIG_SMF is not set
  CONFIG_LIBGCC_RTLIB=y
  
  #
  # Utility Library
  #
  # CONFIG_JSON_LIBRARY is not set
  # CONFIG_RING_BUFFER is not set
  CONFIG_NOTIFY=y
  # CONFIG_BASE64 is not set
  CONFIG_ONOFF=y
  # CONFIG_WINSTREAM is not set
  # CONFIG_UTF8 is not set
  # end of Utility Library
  # end of Additional libraries
  
  #
  # Subsystems and OS Services
  #
  # CONFIG_BINDESC is not set
  CONFIG_BT=y
  CONFIG_BT_HCI=y
  # CONFIG_BT_CUSTOM is not set
  CONFIG_BT_HCI_RAW=y
  # CONFIG_BT_HCI_RAW_H4 is not set
  # CONFIG_BT_HCI_RAW_CMD_EXT is not set
  CONFIG_BT_CONN_TX=y
  # CONFIG_BT_SCA_UPDATE is not set
  # CONFIG_BT_TRANSMIT_POWER_CONTROL is not set
  # CONFIG_BT_ISO_PERIPHERAL is not set
  # CONFIG_BT_ISO_CENTRAL is not set
  # CONFIG_BT_ISO_BROADCASTER is not set
  # CONFIG_BT_ISO_SYNC_RECEIVER is not set
  
  #
  # Bluetooth buffer configuration
  #
  # end of Bluetooth buffer configuration
  
  #
  # Bluetooth Host
  #
  
  #
  # Bluetooth Classic Options
  #
  # end of Bluetooth Classic Options
  # end of Bluetooth Host
  
  CONFIG_BT_CTLR_LE_ENC_SUPPORT=y
  CONFIG_BT_CTLR_EXT_REJ_IND_SUPPORT=y
  CONFIG_BT_CTLR_DATA_LEN_UPDATE_SUPPORT=y
  CONFIG_BT_CTLR_PRIVACY_SUPPORT=y
  CONFIG_BT_CTLR_EXT_SCAN_FP_SUPPORT=y
  CONFIG_BT_CTLR_PHY_UPDATE_SUPPORT=y
  CONFIG_BT_CTLR_PHY_2M_SUPPORT=y
  CONFIG_BT_CTLR_PHY_CODED_SUPPORT=y
  CONFIG_BT_CTLR_ADV_EXT_SUPPORT=y
  CONFIG_BT_CTLR_ADV_PERIODIC_SUPPORT=y
  CONFIG_BT_CTLR_ADV_PERIODIC_RSP_SUPPORT=y
  CONFIG_BT_CTLR_SYNC_PERIODIC_SUPPORT=y
  CONFIG_BT_CTLR_SYNC_PERIODIC_RSP_SUPPORT=y
  CONFIG_BT_CTLR_SYNC_TRANSFER_SENDER_SUPPORT=y
  CONFIG_BT_CTLR_SYNC_TRANSFER_RECEIVER_SUPPORT=y
  CONFIG_BT_CTLR_ADV_ISO_SUPPORT=y
  CONFIG_BT_CTLR_SYNC_ISO_SUPPORT=y
  CONFIG_BT_CTLR_CENTRAL_ISO_SUPPORT=y
  CONFIG_BT_CTLR_PERIPHERAL_ISO_SUPPORT=y
  CONFIG_BT_CTLR_CHAN_SEL_2_SUPPORT=y
  CONFIG_BT_CTLR_SCA_UPDATE_SUPPORT=y
  CONFIG_BT_CTLR_CONN_RSSI_SUPPORT=y
  CONFIG_BT_CTLR_ECDH_SUPPORT=y
  CONFIG_BT_CTLR_LE_POWER_CONTROL_SUPPORT=y
  # CONFIG_BT_LL_SW_SPLIT is not set
  CONFIG_BT_CTLR_HCI=y
  
  #
  # BLE Controller configuration
  #
  CONFIG_BT_CTLR_CRYPTO=y
  CONFIG_BT_CTLR_HCI_VS_BUILD_INFO=""
  # CONFIG_BT_CTLR_TX_PWR_PLUS_3 is not set
  # CONFIG_BT_CTLR_TX_PWR_PLUS_2 is not set
  # CONFIG_BT_CTLR_TX_PWR_PLUS_1 is not set
  CONFIG_BT_CTLR_TX_PWR_0=y
  # CONFIG_BT_CTLR_TX_PWR_MINUS_1 is not set
  # CONFIG_BT_CTLR_TX_PWR_MINUS_2 is not set
  # CONFIG_BT_CTLR_TX_PWR_MINUS_3 is not set
  # CONFIG_BT_CTLR_TX_PWR_MINUS_4 is not set
  # CONFIG_BT_CTLR_TX_PWR_MINUS_5 is not set
  # CONFIG_BT_CTLR_TX_PWR_MINUS_6 is not set
  # CONFIG_BT_CTLR_TX_PWR_MINUS_7 is not set
  # CONFIG_BT_CTLR_TX_PWR_MINUS_8 is not set
  # CONFIG_BT_CTLR_TX_PWR_MINUS_12 is not set
  # CONFIG_BT_CTLR_TX_PWR_MINUS_16 is not set
  # CONFIG_BT_CTLR_TX_PWR_MINUS_20 is not set
  # CONFIG_BT_CTLR_TX_PWR_MINUS_40 is not set
  CONFIG_BT_CTLR_TX_PWR_DBM=0
  CONFIG_BT_CTLR_TX_PWR_ANTENNA=0
  # CONFIG_BT_CTLR_TX_PWR_DYNAMIC_CONTROL is not set
  
  #
  # BLE Controller features
  #
  CONFIG_BT_CTLR_LE_ENC=y
  CONFIG_BT_CTLR_ECDH=y
  CONFIG_BT_CTLR_EXT_REJ_IND=y
  CONFIG_BT_CTLR_LE_PING=y
  CONFIG_BT_CTLR_DATA_LENGTH=y
  CONFIG_BT_CTLR_PHY=y
  CONFIG_BT_CTLR_CONN_RSSI=y
  # CONFIG_BT_CTLR_LE_POWER_CONTROL is not set
  CONFIG_BT_CTLR_FILTER_ACCEPT_LIST=y
  CONFIG_BT_CTLR_PRIVACY=y
  CONFIG_BT_CTLR_RL_SIZE=8
  CONFIG_BT_CTLR_EXT_SCAN_FP=y
  CONFIG_BT_CTLR_PHY_2M=y
  CONFIG_BT_CTLR_PHY_CODED=y
  CONFIG_BT_CTLR_CHAN_SEL_2=y
  # CONFIG_BT_CTLR_ADV_EXT is not set
  # CONFIG_BT_CTLR_SET_HOST_FEATURE is not set
  # CONFIG_BT_CTLR_CENTRAL_ISO is not set
  # CONFIG_BT_CTLR_PERIPHERAL_ISO is not set
  # CONFIG_BT_CTLR_HCI_CODEC_AND_DELAY_INFO is not set
  CONFIG_BT_CTLR_DF_CTE_TX_SUPPORT=y
  # CONFIG_BT_CTLR_ASSERT_HANDLER is not set
  # CONFIG_BT_CTLR_VS_SCAN_REQ_RX is not set
  # CONFIG_BT_SHELL is not set
  # CONFIG_BT_EAD is not set
  
  #
  # Controller Area Network (CAN) bus subsystem
  #
  # end of Controller Area Network (CAN) bus subsystem
  
  # CONFIG_CONSOLE_SUBSYS is not set
  
  #
  # System Monitoring Options
  #
  # CONFIG_THREAD_ANALYZER is not set
  # end of System Monitoring Options
  
  #
  # Debugging Options
  #
  # CONFIG_DEBUG is not set
  # CONFIG_STACK_USAGE is not set
  # CONFIG_STACK_SENTINEL is not set
  CONFIG_PRINTK=y
  CONFIG_EARLY_CONSOLE=y
  # CONFIG_ASSERT is not set
  # CONFIG_FORCE_NO_ASSERT is not set
  CONFIG_ASSERT_VERBOSE=y
  # CONFIG_ASSERT_NO_FILE_INFO is not set
  # CONFIG_ASSERT_NO_COND_INFO is not set
  # CONFIG_ASSERT_NO_MSG_INFO is not set
  # CONFIG_ASSERT_TEST is not set
  # CONFIG_OVERRIDE_FRAME_POINTER_DEFAULT is not set
  # CONFIG_DEBUG_INFO is not set
  # CONFIG_DEBUG_THREAD_INFO is not set
  # CONFIG_DEBUG_COREDUMP is not set
  # end of Debugging Options
  
  # CONFIG_MIPI_STP_DECODER is not set
  # CONFIG_DISK_ACCESS is not set
  # CONFIG_DSP is not set
  # CONFIG_EMUL is not set
  # CONFIG_CHARACTER_FRAMEBUFFER is not set
  
  #
  # File Systems
  #
  # CONFIG_FILE_SYSTEM is not set
  # end of File Systems
  
  #
  # Inter Processor Communication
  #
  # CONFIG_RPMSG_SERVICE is not set
  CONFIG_IPC_SERVICE=y
  CONFIG_IPC_SERVICE_REG_BACKEND_PRIORITY=46
  CONFIG_IPC_SERVICE_BACKEND_RPMSG=y
  CONFIG_IPC_SERVICE_BACKEND_RPMSG_WQ_STACK_SIZE=1024
  CONFIG_IPC_SERVICE_BACKEND_RPMSG_NUM_ENDPOINTS_PER_INSTANCE=2
  CONFIG_IPC_SERVICE_RPMSG=y
  CONFIG_IPC_SERVICE_STATIC_VRINGS=y
  CONFIG_IPC_SERVICE_STATIC_VRINGS_MEM_ALIGNMENT=4
  # CONFIG_IPC_SERVICE_ICMSG is not set
  # CONFIG_IPC_SERVICE_ICMSG_ME is not set
  # end of Inter Processor Communication
  
  # CONFIG_JWT is not set
  # CONFIG_LLEXT is not set
  
  #
  # Linkable loadable Extension Development Kit (EDK)
  #
  CONFIG_LLEXT_EDK_NAME="llext-edk"
  # CONFIG_LLEXT_EDK_USERSPACE_ONLY is not set
  # end of Linkable loadable Extension Development Kit (EDK)
  
  #
  # Logging
  #
  # CONFIG_LOG_OUTPUT is not set
  # end of Logging
  
  CONFIG_MEM_ATTR=y
  # CONFIG_MEM_ATTR_HEAP is not set
  
  #
  # Device Management
  #
  
  #
  # Host command handler subsystem
  #
  # CONFIG_EC_HOST_CMD is not set
  # end of Host command handler subsystem
  
  # CONFIG_OSDP is not set
  # end of Device Management
  
  # CONFIG_MODBUS is not set
  # CONFIG_MODEM_MODULES is not set
  
  #
  # Networking
  #
  CONFIG_NET_BUF=y
  # CONFIG_NET_BUF_LOG is not set
  # CONFIG_NET_BUF_POOL_USAGE is not set
  CONFIG_NET_BUF_ALIGNMENT=0
  # CONFIG_NETWORKING is not set
  # end of Networking
  
  #
  # Power Management
  #
  # end of Power Management
  
  #
  # Portability
  #
  # end of Portability
  
  #
  # Random Number Generators
  #
  # CONFIG_TEST_RANDOM_GENERATOR is not set
  CONFIG_TIMER_RANDOM_INITIAL_STATE=123456789
  CONFIG_ENTROPY_DEVICE_RANDOM_GENERATOR=y
  # CONFIG_XOSHIRO_RANDOM_GENERATOR is not set
  CONFIG_CSPRNG_ENABLED=y
  CONFIG_HARDWARE_DEVICE_CS_GENERATOR=y
  # CONFIG_CTR_DRBG_CSPRNG_GENERATOR is not set
  # end of Random Number Generators
  
  # CONFIG_RTIO is not set
  
  #
  # SD
  #
  # CONFIG_MMC_STACK is not set
  # CONFIG_SDMMC_STACK is not set
  # CONFIG_SDIO_STACK is not set
  # end of SD
  
  # CONFIG_SETTINGS is not set
  # CONFIG_SHELL is not set
  # CONFIG_STATS is not set
  
  #
  # Storage
  #
  # CONFIG_STREAM_FLASH is not set
  # end of Storage
  
  # CONFIG_TASK_WDT is not set
  
  #
  # Testing
  #
  # CONFIG_ZTEST is not set
  # CONFIG_ZTEST_MOCKING is not set
  # CONFIG_ZTRESS is not set
  # CONFIG_TEST is not set
  CONFIG_COVERAGE_GCOV_HEAP_SIZE=16384
  # CONFIG_FORCE_COVERAGE is not set
  # CONFIG_TEST_USERSPACE is not set
  # end of Testing
  
  # CONFIG_TIMING_FUNCTIONS is not set
  # CONFIG_TRACING is not set
  # CONFIG_USB_DEVICE_STACK is not set
  # CONFIG_USB_DEVICE_STACK_NEXT is not set
  # CONFIG_USB_HOST_STACK is not set
  # CONFIG_USBC_STACK is not set
  # CONFIG_ZBUS is not set
  # CONFIG_MODULES is not set
  # end of Subsystems and OS Services
  
  CONFIG_TOOLCHAIN_ZEPHYR_0_16=y
  CONFIG_TOOLCHAIN_ZEPHYR_SUPPORTS_THREAD_LOCAL_STORAGE=y
  
  #
  # Build and Link Features
  #
  
  #
  # Linker Options
  #
  # CONFIG_LINKER_ORPHAN_SECTION_PLACE is not set
  CONFIG_LINKER_ORPHAN_SECTION_WARN=y
  # CONFIG_LINKER_ORPHAN_SECTION_ERROR is not set
  CONFIG_ROM_END_OFFSET=0
  CONFIG_LD_LINKER_SCRIPT_SUPPORTED=y
  CONFIG_LD_LINKER_TEMPLATE=y
  # CONFIG_CMAKE_LINKER_GENERATOR is not set
  # CONFIG_HAVE_CUSTOM_LINKER_SCRIPT is not set
  CONFIG_LINKER_SORT_BY_ALIGNMENT=y
  
  #
  # Linker Sections
  #
  # CONFIG_LINKER_USE_BOOT_SECTION is not set
  # CONFIG_LINKER_USE_PINNED_SECTION is not set
  CONFIG_LINKER_GENERIC_SECTIONS_PRESENT_AT_BOOT=y
  CONFIG_LINKER_LAST_SECTION_ID=y
  CONFIG_LINKER_LAST_SECTION_ID_PATTERN=0xE015E015
  CONFIG_LINKER_USE_RELAX=y
  # end of Linker Sections
  
  CONFIG_LINKER_ITERABLE_SUBALIGN=4
  CONFIG_LINKER_DEVNULL_SUPPORT=y
  # CONFIG_LINKER_DEVNULL_MEMORY is not set
  # end of Linker Options
  
  #
  # Compiler Options
  #
  # CONFIG_STD_C90 is not set
  CONFIG_STD_C99=y
  # CONFIG_STD_C11 is not set
  # CONFIG_STD_C17 is not set
  # CONFIG_STD_C23 is not set
  CONFIG_TOOLCHAIN_SUPPORTS_GNU_EXTENSIONS=y
  # CONFIG_GNU_C_EXTENSIONS is not set
  # CONFIG_CODING_GUIDELINE_CHECK is not set
  # CONFIG_COMPILER_FREESTANDING is not set
  CONFIG_SIZE_OPTIMIZATIONS=y
  # CONFIG_SPEED_OPTIMIZATIONS is not set
  # CONFIG_DEBUG_OPTIMIZATIONS is not set
  # CONFIG_NO_OPTIMIZATIONS is not set
  # CONFIG_COMPILER_WARNINGS_AS_ERRORS is not set
  # CONFIG_COMPILER_SAVE_TEMPS is not set
  CONFIG_COMPILER_TRACK_MACRO_EXPANSION=y
  CONFIG_COMPILER_COLOR_DIAGNOSTICS=y
  # CONFIG_FORTIFY_SOURCE_NONE is not set
  CONFIG_FORTIFY_SOURCE_COMPILE_TIME=y
  # CONFIG_FORTIFY_SOURCE_RUN_TIME is not set
  CONFIG_COMPILER_OPT=""
  # CONFIG_MISRA_SANE is not set
  # end of Compiler Options
  
  # CONFIG_ASSERT_ON_ERRORS is not set
  # CONFIG_NO_RUNTIME_CHECKS is not set
  CONFIG_RUNTIME_ERROR_CHECKS=y
  
  #
  # Build Options
  #
  CONFIG_KERNEL_BIN_NAME="zephyr"
  CONFIG_OUTPUT_STAT=y
  # CONFIG_OUTPUT_SYMBOLS is not set
  # CONFIG_OUTPUT_DISASSEMBLY is not set
  CONFIG_OUTPUT_PRINT_MEMORY_USAGE=y
  # CONFIG_CLEANUP_INTERMEDIATE_FILES is not set
  # CONFIG_BUILD_NO_GAP_FILL is not set
  # CONFIG_BUILD_OUTPUT_EXE is not set
  # CONFIG_BUILD_OUTPUT_S19 is not set
  # CONFIG_BUILD_OUTPUT_UF2 is not set
  # CONFIG_BUILD_OUTPUT_STRIPPED is not set
  # CONFIG_BUILD_OUTPUT_COMPRESS_DEBUG_SECTIONS is not set
  # CONFIG_BUILD_ALIGN_LMA is not set
  # CONFIG_APPLICATION_DEFINED_SYSCALL is not set
  # CONFIG_MAKEFILE_EXPORTS is not set
  # CONFIG_BUILD_OUTPUT_META is not set
  CONFIG_BUILD_OUTPUT_STRIP_PATHS=y
  CONFIG_CHECK_INIT_PRIORITIES=y
  # CONFIG_EMIT_ALL_SYSCALLS is not set
  # end of Build Options
  
  CONFIG_WARN_DEPRECATED=y
  CONFIG_ENFORCE_ZEPHYR_STDINT=y
  # end of Build and Link Features
  
  #
  # Boot Options
  #
  # CONFIG_IS_BOOTLOADER is not set
  # CONFIG_BOOTLOADER_BOSSA is not set
  # end of Boot Options
  

[lincoln-lu]

I realize  "# CONFIG_BT_CTLR_TX_PWR_DYNAMIC_CONTROL is not set" in this .config file, which is generated from C:\ncs\v2.7.0\zephyr\samples\bluetooth\hci_ipc\prj.conf. Should this config be set y?