Unable to scan Advertising in nRF52805

[ErShuanzi]

When Developing with nRF5 SDK, follow the Developing for the nRF52805 with nRF5 SDK - Getting Started - nRF5 SDK guides - Nordic DevZone。

The Peripheral UART Example runs normally without any error output, but in nRF Connect App cannot scan advertising from this device.

Have been checked hardware circuit and BLE Stack configuration.

what other possible reasons may cause fail to be scanned?

[Menon]

Hello,

You mentioned that peripheral_UART works. Does that mean you were able to see your device advertising via the nRF Connect app? If so, the issue might be within the modifications you have implemented in your custom application. I recommend sharing the details of the modifications you’ve made. If you want to keep the case private while sharing, please let me know, and I can assist you with that.

Kind regards,
Abhijith

[ErShuanzi]

Hello，

peripheral_UART is not working properly. The program has no error output and keeps running, but I can't see my device advertising via the nRF Connect app.

This is the page "Options of Target -->Target", i am wondering if I have a problem with the settings of "IROM1" and" IRAM1"?

And in the Preprocessor Definitions under the C/C++  tab. In order to adapt to nRF52805, I modified defines to following content:

DEVELOP_IN_NRF52805 NRFX_COREDEP_DELAY_US_LOOP_CYCLES=7  APP_TIMER_V2 APP_TIMER_V2_RTC1_ENABLED BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52805_XXAA NRF52_PAN_74 NRF_SD_BLE_API_VERSION=7 S112 SOFTDEVICE_PRESENT __HEAP_SIZE=2048 __STACK_SIZE=2048

As for the code of the program, I used the peripheral_UART example code and didn't change it.

[ErShuanzi]

Hello，

Thanks for answer, the problem was resolved. I surmise because I used the RESET pin of the nRF52805 as a regular pin, although it was indicated in the data document (nRF52805) as P0.21/nREST, but I did not understand how to manually configure the functionality of this pin. Now that I no longer use this pin, and switch to other regular pins, have solved the problem of advertising. Thank you again.

Kind regards,
ErShuanzi