Hi Support Team
1) Does the new nRF54L05 chipset need to recover before program? We execute command line nrfjprog --recover but it is unavailable for nRF54L05. And nRF54L05 can not be programmed by the Programmer APP on the nRF Connect for Desktop.
2) What is the recommend way of programming nRF54L05 for future production? Many thanks.
Hi Hieu
Thank you so much. But I don't know where and what tool is needed to execute the following steps. Could you give me a hands-on example?
Hi Hieu
The command nrfutil device recover is available for the nRF54L15 DK, but it is still unavailable for the custom board. The custom board still can't be flash normally. Could you help to check once more? Thank you so much.
Hi Hieu
The DK in the below screenshot is the revision of the nRF52 DK we are using and the voltage of VDD_nRF where the red arrow points is the voltage the nRF54L running on the custom hardware. And the customer used the below screenshot’s J-Link has the same issue. Customer said there have been successful programmed, it seems the chipset has been protected.Now the issue is the custom board can’t be programmed and recovered again. Many thanks.
Hi Hieu
The DK in the below screenshot is the revision of the nRF52 DK we are using and the voltage of VDD_nRF where the red arrow points is the voltage the nRF54L running on the custom hardware. And the customer used the below screenshot’s J-Link has the same issue. Customer said there have been successful programmed, it seems the chipset has been protected.Now the issue is the custom board can’t be programmed and recovered again. Many thanks.
