nrf51822 QFAB R7 programming issue from nrf51 DK

[Marco Russi]

Hi, I developed an application based on s110 using the nrf51 DK and it works fine. The DK is based on a nrf51422 QFAC which is the biggest one in terms of memory sizes. Now, I want to flash the same application on a custom board having a nrf51822 QFAB R7 which has 128K flash and 16K ram. I'm developing in gcc environment and I created the following linker script that works for the DK:

SEARCH_DIR(.) GROUP(-lgcc -lc -lnosys)

MEMORY { FLASH (rx) : ORIGIN = 0x00018000, LENGTH = 0x8000 RAM (rwx) : ORIGIN = 0x20002000, LENGTH = 0x2000 }

INCLUDE "gcc_nrf51_common.ld"

I can use many other values for flash and ram and all of them work but some values don't. Anyway, I flashed the nrf51822 and it doesn't work. I tried to change those values but I obtained the application output pin fixed at high level at most. Any suggestions? Thanks.

[Marco Russi]

Hi, the schematic is the same of the DK, there is an external 16MHz crystal. I have the hex file of another software previously developed for that board and it seems it works fine. This means that the board is ok. Could it be anything else? Thanks.

[Marco Russi]

Hi, thanks a lot. It works now. I didn't considered the second external crystal. Thanks!