Radio Test in nRF7002 for FCC test

[Jagan K]

Hi,

We’ve designed a project using the nRF5340 + nRF7002 combination, with Wi-Fi connectivity enabled.

As part of our preparations for FCC certification, we’re currently focusing on the radio testing for both 2.4 GHz and 5 GHz Wi-Fi bands. We’ve built the firmware from the  samples/wifi/radio_test path and documentation has a set of available commands for this radio test.

However, we would like to clarify which specific commands are required to perform testing for both the 2.4 GHz and 5 GHz bands.

Thanks,

Jagan K

[JONATHAN LL]

This is what we have on it:

https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/wifi/regulatory_certification/index.html 
https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/wifi/wifi_certification.html 

For the BLE testing you will need DTM sample, but for testing of the radio you can use the radio test. 


For the sub commands you can find them here: https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/wifi/radio_test/multi_domain/radio_test_subcommands.html#wi-fi_radio_test_subcommands 

Regards,
Jonathan