Hello,
I am working with the NRF5340dk, nrf7002ek, and PPKII. I am unable to get the DK to power up with the PPK. I used a knife to break the trace but for some reason no matter how I connect the PPK it doesn't run the firmware. I have checked to verify that boards are not damaged. My firmware works great over USB. If anyone has any input that would be great.
PPK + -----------------> NRF5340dk External +
PPK - ------------------> NRF5340 External -
I also have a jumper over nrf current measurement.
I know the board gets powered because when SW10 is turned on, the green led on PCB powers on. However the shield does not receive power (no blue light)
Thanks,
Nick