Migrating nRF53 Zigbee project to nRF54 results in ZBOSS errors

[Kampino]

Hi,

I try to migrate a working nRF53 Zigbee project from SDK 2.7 to the latest SDK and an nRF54. As described here, I also switched to Zigbee R23. The project structure is shown below.

But the build exit with the error message

C:/Users/konta/Desktop/BeeLight/firmware/ncs-zigbee/subsys/osif/zb_nrf_nvram.c:16:32: error: 'PM_ZBOSS_NVRAM_SIZE' undeclared here (not in a function); did you mean 'PM_SRAM_SIZE'?
   16 | #define ZBOSS_NVRAM_PAGE_SIZE (PM_ZBOSS_NVRAM_SIZE / CONFIG_ZIGBEE_NVRAM_PAGE_COUNT)
      |                                ^~~~~~~~~~~~~~~~~~~
C:/Users/konta/Desktop/BeeLight/firmware/zephyr/include/zephyr/toolchain/gcc.h:87:52: note: in definition of macro 'BUILD_ASSERT'
   87 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert((EXPR), "" MSG)
      |                                                    ^~~~
C:/Users/konta/Desktop/BeeLight/firmware/ncs-zigbee/subsys/osif/zb_nrf_nvram.c:18:15: note: in expansion of macro 'ZBOSS_NVRAM_PAGE_SIZE'
   18 | BUILD_ASSERT((ZBOSS_NVRAM_PAGE_SIZE % PHYSICAL_PAGE_SIZE) == 0,
      |               ^~~~~~~~~~~~~~~~~~~~~
C:/Users/konta/Desktop/BeeLight/firmware/zephyr/include/zephyr/toolchain/gcc.h:87:51: error: expression in static assertion is not an integer
   87 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert((EXPR), "" MSG)
      |                                                   ^
C:/Users/konta/Desktop/BeeLight/firmware/ncs-zigbee/subsys/osif/zb_nrf_nvram.c:18:1: note: in expansion of macro 'BUILD_ASSERT'
   18 | BUILD_ASSERT((ZBOSS_NVRAM_PAGE_SIZE % PHYSICAL_PAGE_SIZE) == 0,
      | ^~~~~~~~~~~~
C:/Users/konta/Desktop/BeeLight/firmware/ncs-zigbee/subsys/osif/zb_nrf_nvram.c: In function 'zb_osif_nvram_init':
C:/Users/konta/Desktop/BeeLight/firmware/ncs-zigbee/subsys/osif/zb_nrf_nvram.c:39:31: error: 'PM_ZBOSS_NVRAM_ID' undeclared (first use in this function)
   39 |         ret = flash_area_open(PM_ZBOSS_NVRAM_ID, &fa);
      |                               ^~~~~~~~~~~~~~~~~
C:/Users/konta/Desktop/BeeLight/firmware/ncs-zigbee/subsys/osif/zb_nrf_nvram.c:39:31: note: each undeclared identifier is reported only once for each function it appears in
C:/Users/konta/Desktop/BeeLight/firmware/ncs-zigbee/subsys/osif/zb_nrf_nvram.c:45:31: error: 'PM_ZBOSS_PRODUCT_CONFIG_ID' undeclared (first use in this function)
   45 |         ret = flash_area_open(PM_ZBOSS_PRODUCT_CONFIG_ID, &fa_pc);
      |                               ^~~~~~~~~~~~~~~~~~~~~~~~~~
C:/Users/konta/Desktop/BeeLight/firmware/ncs-zigbee/subsys/osif/zb_nrf_nvram.c: In function 'zb_get_nvram_page_length':
C:/Users/konta/Desktop/BeeLight/firmware/ncs-zigbee/subsys/osif/zb_nrf_nvram.c:55:1: warning: control reaches end of non-void function [-Wreturn-type]
   55 | }
      | ^
[449/492] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/nrf_802154_trx_dppi.c.obj

What causes this issue and how can I fix it?

[AHaug]

Hi,

Did you also follow the steps in the migration guides from 2.7.0 and incrementally up to 3.0.1 i.e https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/migration_guides.html with emphasis on https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/migration/migration_sysbuild.html if you're coming from child/parent images?

If you're unsure about the sysbuild migration, what does your project folder look like? Are you using child images or sysbuild? https://academy.nordicsemi.com/courses/nrf-connect-sdk-intermediate/lessons/lesson-8-sysbuild/topic/sysbuild-explained/ 

Kind regards,
Andreas

[Kampino]

Hi,

thanks to the answer. The project is built with Sysbuild and when removing Zigbee from the project, the build runs smoothly.

I´ve pushed the latest version of the project to my GitHub so you can see the structure:

github.com/.../firmware

[Kampino]

Hi,

I haven´t tested it with a DK because I don´t have one. But the board I´ve created is based on the nRF54DK (I basically changed the name and add the Zigbee stuff to it) so I think the result should be the same. But I can test it later if you want.

[AHaug]

Noted, I will check in with the Zigbee team if the ZBOSS errors are something they can identify right out of the gate, but while waiting it would be very helpful if you can isolate if this is related to for instance

• Custom 54L15 board issue with your ported application
• Custom 52840 board issue with your ported application
• Custom 54L15 board with a NCS Zigbee sample, for instance the Light Bulb sample
• 54L15DK with your ported application

Kind regards,
Andreas

[Kampino]

Hi Andreas,

I´ve checked the project with the nrf54l15dk and the nrf52dk and I run into the same issue. I will try the NCS Zigbee example but it needs a bit more time to set it up properly. A colleague did it last week and there we don´t had the issue.

[Kampino]

Hi Andreas,
have you figured out the issue yet?

[AHaug]

Hi,

No, unfortunately not. Since there's no way for me to reproduce the issue within NCS with a DK, I'm limited in what recommendations I can give other than those initially given w.r.t migration notes. NCS 2.7.0 to NCS 3.0.0 is a big leap, so incrementally updating the features from your working application to a newer version and gradually checking that it works together with comparing any of the relevant R23 Zigbee samples with 54L15DK configuration is my best recommendation until I hear back internally.

Kind regards,
Andreas

[Kampino]

Hi Andreas,

okay than I will wait a bit longer. I´ve tested it with previous SDKs and I run into the same issue. SDK 2.8.0 doesn´t work because nRF54 is missing here.