Hi,
Hope you are doing well.
I would like to use eSIM on nRF9151-DK board and an eSIM has been assembled in the board. However, eSIM is not detected.
According to the datasheet, I have also removed the SIM Card. and reset the PIN0.14.
"
AT%XSIM=1
OK
AT+CFUN=1
OK
%XSIM: 0,9
AT+CPIN?
ERROR
"
The voltage of pin P0.14 is zero but there is no power on VCC of eSIM. However, even if the PIN0.14 is low the SIM card works.