• State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 71 subscribers
  • Views 1098 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 112269
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Side effect of adding a LFCLK of 32.768khz with ESR 90k ohm oscillator?

Faizan

Hi, Side effect of adding a LFCLK of 32.768khz with 90k ohm ESR oscillator? where as data sheet recommends Max value of 80kohm.

Side effect of adding lower drive level crystal oscillator 0.5uW where as nordic recommends 1uW Max

Parents
  • FormerMember
    0 FormerMember

    A larger ESR increases the start-up time for the crystal. I would not recommend you to use a crystal with a larger ESR then the max value stated in the product specification.

    Maximum drive level for a crystal oscillator is already being discussed in this thread.

Reply
  • FormerMember
    0 FormerMember

    A larger ESR increases the start-up time for the crystal. I would not recommend you to use a crystal with a larger ESR then the max value stated in the product specification.

    Maximum drive level for a crystal oscillator is already being discussed in this thread.

Children
No Data
Related
Terms of service