sysbuild + partition manager + mcuboot + external flash

[rerickson]

Using NCS 3.0.0

When placing the app slot 1 in external flash, mcuboot cannot open the flash area.

I am testing this with nrf54L15 + 8 MB SPI flash on the DVK.

This same issue occurs with nrf52840 + 2MB QSPI flash.

static partition config:

1641.pm_static.bl54l15_dvk_nrf54l15_cpuapp.mcuboot.ext_flash.yml.zip

mcuboot debug output:

[00:00:00.003,205] <inf> spi_nor: mx25r6435f@0: SFDP v 1.6 AP ff with 3 PH
[00:00:00.003,214] <inf> spi_nor: PH0: ff00 rev 1.6: 16 DW @ 30
[00:00:00.003,355] <inf> spi_nor: mx25r6435f@0: 8 MiBy flash
[00:00:00.003,365] <dbg> spi_nor: spi_nor_process_bfp: Erase 4096 with 20
[00:00:00.003,371] <dbg> spi_nor: spi_nor_process_bfp: Erase 32768 with 52
[00:00:00.003,378] <dbg> spi_nor: spi_nor_process_bfp: Erase 65536 with d8
[00:00:00.003,385] <dbg> spi_nor: spi_nor_process_bfp: Page size 256 bytes
[00:00:00.003,393] <inf> spi_nor: PH1: ffc2 rev 1.0: 4 DW @ 110
[00:00:00.003,402] <dbg> spi_nor: setup_pages_layout: layout 128 x 65536 By pages
[00:00:00.005,623] <inf> mcuboot: Starting bootloader
[00:00:00.005,659] <err> mcuboot: Failed to open flash area ID 1 (image 0 slot 1): -2, cannot continue

partition manager report:

  bootconf (0x4 - 4B): 
+-------------------------------+
| 0xffd080: bootconf (0x4 - 4B) |
+-------------------------------+

  external_flash (0x800000 - 8192kB): 
+--------------------------------------------------+
+---0x0: mcuboot_secondary (0x16d000 - 1460kB)-----+
| 0x0: mcuboot_secondary_pad (0x800 - 2kB)         |
| 0x800: mcuboot_secondary_app (0x16c800 - 1458kB) |
+--------------------------------------------------+
| 0x16d000: user (0x93000 - 588kB)                 |
| 0x200000: littlefs_storage (0x600000 - 6144kB)   |
| 0x800000: external_flash (0x0 - 0B)              |
+--------------------------------------------------+

  flash_primary (0x17d000 - 1524kB): 
+----------------------------------------------------+
| 0x0: mcuboot (0x12000 - 72kB)                      |
+---0x12000: mcuboot_primary (0x16b000 - 1452kB)-----+
| 0x12000: mcuboot_pad (0x800 - 2kB)                 |
+---0x12800: mcuboot_primary_app (0x16a800 - 1450kB)-+
| 0x12800: app (0x16a800 - 1450kB)                   |
+----------------------------------------------------+

  otp (0x4fc - 1kB): 
+-----------------------------+
| 0xffd500: otp (0x4fc - 1kB) |
+-----------------------------+

  sram_primary (0x40000 - 256kB): 
+--------------------------------------------+
| 0x20000000: sram_primary (0x40000 - 256kB) |
+--------------------------------------------+

[rerickson]

I believe I have solved the issue. BOTH of the following need to be set at the sysbuild level:

SB_CONFIG_PM_EXTERNAL_FLASH_MCUBOOT_SECONDARY=y
SB_CONFIG_PM_OVERRIDE_EXTERNAL_DRIVER_CHECK=y

[rerickson]

Now I am experiencing a boot loop. Any ideas of where to look? The debugger isn't showing anything useful...

[00:02:48.723,857] <inf> mcuboot: Starting bootloader
[00:02:48.724,179] <wrn> mcuboot: Cannot upgrade: not a compatible amount of sectors
[00:02:48.833,905] <inf> mcuboot: Starting bootloader
[00:02:48.834,227] <wrn> mcuboot: Cannot upgrade: not a compatible amount of sectors