Appcore rng sample build fails with NRF5340 + MCUBOOT + CONFIG_NRF_SECURITY with SDK2.9.1

[Dustin Stahlback]

Using nrf sample from v2.9.1/nrf/samples/crpyto/rng
Configure build with v2.9.1 SDK/Toolchain
Configure build with board target: nrf5340dk/nrf5340/cpuapp
Add MCUBOOT support via sysbuild config


Appcore Build fails with

warning: MBEDTLS_SHA256 (defined at C:/ncs/v2.9.1/zephyr/modules/mbedtls\Kconfig.tls-generic:349, modules\mbedtls\Kconfig.tls-generic:349) has direct dependencies (!(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS) || (!(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS && 0) with value n, but is currently being y-selected by the following symbols:
- FLASH_AREA_CHECK_INTEGRITY_MBEDTLS (defined at subsys/storage/flash_map/Kconfig:58), with value y, direct dependencies <choice FLASH_AREA_CHECK_INTEGRITY_BACKEND> (value: y), and select condition <choice FLASH_AREA_CHECK_INTEGRITY_BACKEND> (value: y)

error: Aborting due to Kconfig warnings

Attached is the full project minus the build directory

rng - Copy.zip

[Menon]

hello,

Using nrf sample from v2.9.1/nrf/samples/crpyto/rng
Configure build with v2.9.1 SDK/Toolchain
Configure build with board target: nrf5340dk/nrf5340/cpuapp
Add MCUBOOT support via sysbuild config

I can try that here, but could you please attach the full build log? You can use the Insert tab to do so.

Kind Regards,

Abhijith

[Dustin Stahlback]

Attached is the build log.

Fullscreen 2630.build-log.txt Download

Executing task: nRF Connect: Generate config nrf5340dk/nrf5340/cpuapp for c:\projects\samples\rng 

Building rng
C:\Windows\system32\cmd.exe /d /s /c "west build --build-dir c:/projects/samples/rng/build c:/projects/samples/rng --pristine --board nrf5340dk/nrf5340/cpuapp -- -DNCS_TOOLCHAIN_VERSION=NONE -DBOARD_ROOT=c:/projects/samples/rng"

-- west build: generating a build system
Loading Zephyr module(s) (Zephyr base): sysbuild_default
-- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: C:/ncs/v2.9.1/zephyr/.cache
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: nrf5340dk, qualifiers: nrf5340/cpuapp
Parsing C:/ncs/v2.9.1/zephyr/share/sysbuild/Kconfig
Loaded configuration 'C:/projects/samples/rng/build/_sysbuild/empty.conf'
Merged configuration 'c:/projects/samples/rng/sysbuild.conf'
Configuration saved to 'C:/projects/samples/rng/build/zephyr/.config'
Kconfig header saved to 'C:/projects/samples/rng/build/_sysbuild/autoconf.h'
-- 
   *****************************
   * Running CMake for mcuboot *
   *****************************

Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/v2.9.1/bootloader/mcuboot/boot/zephyr
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: C:/ncs/v2.9.1/zephyr/.cache
-- Zephyr version: 3.7.99 (C:/ncs/v2.9.1/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: nrf5340dk, qualifiers: nrf5340/cpuapp
-- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/b620d30767/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") 
-- Found BOARD.dts: C:/ncs/v2.9.1/zephyr/boards/nordic/nrf5340dk/nrf5340dk_nrf5340_cpuapp.dts
-- Found devicetree overlay: C:/projects/samples/rng/sysbuild/mcuboot.overlay
-- Generated zephyr.dts: C:/projects/samples/rng/build/mcuboot/zephyr/zephyr.dts
-- Generated devicetree_generated.h: C:/projects/samples/rng/build/mcuboot/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: C:/projects/samples/rng/build/mcuboot/zephyr/dts.cmake

warning: LOG_DEFAULT_LEVEL (defined at subsys/logging\Kconfig.filtering:13) was assigned the value
'0' but got the value ''. Check these unsatisfied dependencies: LOG (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_LOG_DEFAULT_LEVEL and/or look up
LOG_DEFAULT_LEVEL in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.


warning: The choice symbol MCUBOOT_LOG_LEVEL_INF (defined at
subsys/logging/Kconfig.template.log_config:17) was selected (set =y), but no symbol ended up as the
choice selection. See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUBOOT_LOG_LEVEL_INF
and/or look up MCUBOOT_LOG_LEVEL_INF in the menuconfig/guiconfig interface. The Application
Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of
the manual might be helpful too.


warning: The choice symbol LOG_MODE_MINIMAL (defined at subsys/logging\Kconfig.mode:29) was selected
(set =y), but no symbol ended up as the choice selection. See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_LOG_MODE_MINIMAL and/or look up
LOG_MODE_MINIMAL in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.

Parsing C:/ncs/v2.9.1/bootloader/mcuboot/boot/zephyr/Kconfig
Loaded configuration 'C:/ncs/v2.9.1/zephyr/boards/nordic/nrf5340dk/nrf5340dk_nrf5340_cpuapp_defconfig'
Merged configuration 'C:/ncs/v2.9.1/bootloader/mcuboot/boot/zephyr/prj.conf'
Merged configuration 'C:/projects/samples/rng/sysbuild/mcuboot.conf'
Merged configuration 'C:/projects/samples/rng/build/mcuboot/zephyr/.config.sysbuild'
Configuration saved to 'C:/projects/samples/rng/build/mcuboot/zephyr/.config'
Kconfig header saved to 'C:/projects/samples/rng/build/mcuboot/zephyr/include/generated/zephyr/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38") 
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
-- Setting build type to 'MinSizeRel' as none was specified.
CMake Warning at C:/ncs/v2.9.1/zephyr/CMakeLists.txt:952 (message):
  No SOURCES given to Zephyr library: drivers__console

  Excluding target from build.


MCUBoot bootloader key file: C:/projects/signing/keys/ins.pem
-- Configuring done
-- Generating done
-- Build files have been written to: C:/projects/samples/rng/build/mcuboot
-- 
   *************************
   * Running CMake for rng *
   *************************

-- Application: C:/projects/samples/rng
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: C:/ncs/v2.9.1/zephyr/.cache
-- Zephyr version: 3.7.99 (C:/ncs/v2.9.1/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
Loading Zephyr default modules (Zephyr base).
-- Board: nrf5340dk, qualifiers: nrf5340/cpuapp
-- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/b620d30767/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") 
-- Found BOARD.dts: C:/ncs/v2.9.1/zephyr/boards/nordic/nrf5340dk/nrf5340dk_nrf5340_cpuapp.dts
-- Generated zephyr.dts: C:/projects/samples/rng/build/rng/zephyr/zephyr.dts
-- Generated devicetree_generated.h: C:/projects/samples/rng/build/rng/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: C:/projects/samples/rng/build/rng/zephyr/dts.cmake

Parsing C:/ncs/v2.9.1/zephyr/Kconfig
Loaded configuration 'C:/ncs/v2.9.1/zephyr/boards/nordic/nrf5340dk/nrf5340dk_nrf5340_cpuapp_defconfig'
Merged configuration 'C:/projects/samples/rng/prj.conf'
Merged configuration 'C:/projects/samples/rng/boards/nrf5340dk_nrf5340_cpuapp.conf'
Merged configuration 'C:/projects/samples/rng/build/rng/zephyr/.config.sysbuild'
warning: MBEDTLS_SHA256 (defined at C:/ncs/v2.9.1/zephyr/modules/mbedtls\Kconfig.tls-generic:349, modules\mbedtls\Kconfig.tls-generic:349) has direct dependencies (!(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS) || (!(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS && 0) with value n, but is currently being y-selected by the following symbols:
 - FLASH_AREA_CHECK_INTEGRITY_MBEDTLS (defined at subsys/storage/flash_map/Kconfig:58), with value y, direct dependencies <choice FLASH_AREA_CHECK_INTEGRITY_BACKEND> (value: y), and select condition <choice FLASH_AREA_CHECK_INTEGRITY_BACKEND> (value: y)

error: Aborting due to Kconfig warnings

CMake Error at C:/ncs/v2.9.1/zephyr/cmake/modules/kconfig.cmake:396 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  C:/ncs/v2.9.1/nrf/cmake/modules/kconfig.cmake:29 (include)
  C:/ncs/v2.9.1/zephyr/cmake/modules/zephyr_default.cmake:133 (include)
  C:/ncs/v2.9.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  C:/ncs/v2.9.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:9 (find_package)


-- Configuring incomplete, errors occurred!
CMake Error at cmake/modules/sysbuild_extensions.cmake:514 (message):
  CMake configure failed for Zephyr project: rng

  Location: C:/projects/samples/rng
Call Stack (most recent call first):
  cmake/modules/sysbuild_images.cmake:20 (ExternalZephyrProject_Cmake)
  cmake/modules/sysbuild_default.cmake:20 (include)
  C:/ncs/v2.9.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  C:/ncs/v2.9.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  C:/ncs/v2.9.1/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
  template/CMakeLists.txt:10 (find_package)


-- Configuring incomplete, errors occurred!
See also "C:/projects/samples/rng/build/CMakeFiles/CMakeOutput.log".
FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\b620d30767\opt\bin\cmake.EXE' -DWEST_PYTHON=C:/ncs/toolchains/b620d30767/opt/bin/python.exe '-Bc:\projects\samples\rng\build' -GNinja -DBOARD=nrf5340dk/nrf5340/cpuapp -DNCS_TOOLCHAIN_VERSION=NONE -DBOARD_ROOT=c:/projects/samples/rng '-SC:\ncs\v2.9.1\zephyr\share\sysbuild' '-DAPP_DIR:PATH=c:\projects\samples\rng'

 *  The terminal process terminated with exit code: 1. 
 *  Terminal will be reused by tasks, press any key to close it.