Hi,
I am trying to install nRFconnect SDK and VS Code Windows 10 by following NORDIC Dev Academy lessons.
Encountering following errors while building the following example
zephyr\samples\basic\blinky
FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\0b393f9e1b\opt\bin\cmake.EXE' --build C:/myfw/ncsfund/l1_e2/build
Hi,
Did you make any changes to the sample?
Which SDK version are you working with?
Also, which DK are you using?
Regards,
Priyanka
Hi,
Thanks for the reply.
Attempt was made to install nRF Connect SDK and flash first example as per NORDIC Dev Academy.
Find attached a complete log of scrrenshots and error messages encountered.
Also find attached TERMINAL output log while building.
Hope this helps to find a solution.
Please note in the past I have successfully run nRF connect SDK older versions perhaps but I am getting into development with NORDIC SoCs again after a long interval.
Regards,
Jogen
* Executing task: nRF Connect: Generate config nrf52840dk/nrf52840 for c:\myfw\ncsfund\l1_e2 Building l1_e2 C:\Windows\system32\cmd.exe /d /s /c "west build --build-dir c:/myfw/ncsfund/l1_e2/build c:/myfw/ncsfund/l1_e2 --pristine --board nrf52840dk/nrf52840 -- -DBOARD_ROOT=c:/myfw/ncsfund/l1_e2" -- west build: generating a build system Loading Zephyr module(s) (Zephyr base): sysbuild_default -- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter -- Cache files will be written to: C:/ncs/v3.0.2/zephyr/.cache -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: nrf52840dk, qualifiers: nrf52840 Parsing C:/ncs/v3.0.2/zephyr/share/sysbuild/Kconfig Loaded configuration 'C:/myfw/ncsfund/l1_e2/build/_sysbuild/empty.conf' Merged configuration 'C:/myfw/ncsfund/l1_e2/build/_sysbuild/empty.conf' Configuration saved to 'C:/myfw/ncsfund/l1_e2/build/zephyr/.config' Kconfig header saved to 'C:/myfw/ncsfund/l1_e2/build/_sysbuild/autoconf.h' -- *************************** * Running CMake for l1_e2 * *************************** Loading Zephyr default modules (Zephyr base). -- Application: C:/myfw/ncsfund/l1_e2 -- CMake version: 3.21.0 -- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter -- Cache files will be written to: C:/ncs/v3.0.2/zephyr/.cache -- Zephyr version: 4.0.99 (C:/ncs/v3.0.2/zephyr) -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: nrf52840dk, qualifiers: nrf52840 -- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk) -- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk) -- Found Dtc: C:/ncs/toolchains/0b393f9e1b/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") -- Found BOARD.dts: C:/ncs/v3.0.2/zephyr/boards/nordic/nrf52840dk/nrf52840dk_nrf52840.dts -- Generated zephyr.dts: C:/myfw/ncsfund/l1_e2/build/l1_e2/zephyr/zephyr.dts -- Generated pickled edt: C:/myfw/ncsfund/l1_e2/build/l1_e2/zephyr/edt.pickle -- Generated zephyr.dts: C:/myfw/ncsfund/l1_e2/build/l1_e2/zephyr/zephyr.dts -- Generated devicetree_generated.h: C:/myfw/ncsfund/l1_e2/build/l1_e2/zephyr/include/generated/zephyr/devicetree_generated.h -- Including generated dts.cmake file: C:/myfw/ncsfund/l1_e2/build/l1_e2/zephyr/dts.cmake Parsing C:/ncs/v3.0.2/zephyr/Kconfig Loaded configuration 'C:/ncs/v3.0.2/zephyr/boards/nordic/nrf52840dk/nrf52840dk_nrf52840_defconfig' Merged configuration 'C:/myfw/ncsfund/l1_e2/prj.conf' Merged configuration 'C:/myfw/ncsfund/l1_e2/build/l1_e2/zephyr/.config.sysbuild' Configuration saved to 'C:/myfw/ncsfund/l1_e2/build/l1_e2/zephyr/.config' Kconfig header saved to 'C:/myfw/ncsfund/l1_e2/build/l1_e2/zephyr/include/generated/zephyr/autoconf.h' -- Found GnuLd: c:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38") -- The C compiler identification is GNU 12.2.0 -- The CXX compiler identification is GNU 12.2.0 -- The ASM compiler identification is GNU -- Found assembler: C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe -- Configuring done -- Generating done -- Build files have been written to: C:/myfw/ncsfund/l1_e2/build/l1_e2 -- Configuring done -- Generating done -- Build files have been written to: C:/myfw/ncsfund/l1_e2/build -- west build: building application [4/152] Generating include/generated/zephyr/version.h -- Zephyr version: 4.0.99 (C:/ncs/v3.0.2/zephyr), build: v4.0.99-ncs1-2 [147/152] Linking C executable zephyr\zephyr_pre0.elf FAILED: zephyr/zephyr_pre0.elf zephyr/zephyr_pre0.map C:/myfw/ncsfund/l1_e2/build/l1_e2/zephyr/zephyr_pre0.map cmd.exe /C "cd . && C:\ncs\toolchains\0b393f9e1b\opt\zephyr-sdk\arm-zephyr-eabi\bin\arm-zephyr-eabi-gcc.exe -gdwarf-4 zephyr/CMakeFiles/zephyr_pre0.dir/misc/empty_file.c.obj -o zephyr\zephyr_pre0.elf zephyr/CMakeFiles/offsets.dir/./arch/arm/core/offsets/offsets.c.obj -T zephyr/linker_zephyr_pre0.cmd -Wl,-Map=C:/myfw/ncsfund/l1_e2/build/l1_e2/zephyr/zephyr_pre0.map -Wl,--whole-archive app/libapp.a zephyr/libzephyr.a zephyr/arch/common/libarch__common.a zephyr/arch/arch/arm/core/libarch__arm__core.a zephyr/arch/arch/arm/core/cortex_m/libarch__arm__core__cortex_m.a zephyr/arch/arch/arm/core/mpu/libarch__arm__core__mpu.a zephyr/lib/libc/picolibc/liblib__libc__picolibc.a zephyr/lib/libc/common/liblib__libc__common.a zephyr/soc/soc/nrf52840/libsoc__nordic.a zephyr/drivers/clock_control/libdrivers__clock_control.a zephyr/drivers/console/libdrivers__console.a zephyr/drivers/gpio/libdrivers__gpio.a zephyr/drivers/pinctrl/libdrivers__pinctrl.a zephyr/drivers/serial/libdrivers__serial.a zephyr/drivers/timer/libdrivers__timer.a modules/nrf/drivers/hw_cc3xx/lib..__nrf__drivers__hw_cc3xx.a modules/hal_nordic/modules/hal_nordic/nrfx/libmodules__hal_nordic__nrfx.a modules/segger/libmodules__segger.a -Wl,--no-whole-archive zephyr/kernel/libkernel.a -LC:/myfw/ncsfund/l1_e2/build/l1_e2/zephyr zephyr/arch/common/libisr_tables.a -mcpu=cortex-m4 -mthumb -mabi=aapcs -mfp16-format=ieee -mtp=soft -fuse-ld=bfd -Wl,--gc-sections -Wl,--build-id=none -Wl,--sort-common=descending -Wl,--sort-section=alignment -Wl,-u,_OffsetAbsSyms -Wl,-u,_ConfigAbsSyms -nostdlib -static -Wl,-X -Wl,-N -Wl,--orphan-handling=warn -Wl,-no-pie -specs=picolibc.specs -DPICOLIBC_LONG_LONG_PRINTF_SCANF C:/ncs/v3.0.2/nrfxlib/crypto/nrf_cc310_platform/lib/cortex-m4/soft-float/no-interrupts/libnrf_cc310_platform_0.9.19.a -L"c:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/thumb/v7e-m/nofp" -lc -lgcc && cmd.exe /C "cd /D C:\myfw\ncsfund\l1_e2\build\l1_e2\zephyr && C:\ncs\toolchains\0b393f9e1b\opt\bin\cmake.exe -E true"" 'cmd.exe' is not recognized as an internal or external command, operable program or batch file. ninja: build stopped: subcommand failed. FAILED: _sysbuild/sysbuild/images/l1_e2-prefix/src/l1_e2-stamp/l1_e2-build C:/myfw/ncsfund/l1_e2/build/_sysbuild/sysbuild/images/l1_e2-prefix/src/l1_e2-stamp/l1_e2-build cmd.exe /C "cd /D C:\myfw\ncsfund\l1_e2\build\l1_e2 && C:\ncs\toolchains\0b393f9e1b\opt\bin\cmake.exe --build ." ninja: build stopped: subcommand failed. FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\0b393f9e1b\opt\bin\cmake.EXE' --build C:/myfw/ncsfund/l1_e2/build * The terminal process terminated with exit code: 1. * Terminal will be reused by tasks, press any key to close it.
Hi,
Any Update?
Regards.
Hi Jogen,
Could you select your Environment variables and check if the following are present? i.e. Path should have C:\Windows\System32 (along with many other stuff, but it should have this)
and ComSpec should have C:\Windows\System32\cmd.exe
If not, edit them as shown below.
-Priyanka
Hi Priyanka,
Paths are correctly appearing. see below.
Problem appears to be with Cmake path.
Kindly help how to resolve this issue.
Where to install CMake and what path to be given.
Regards.
Jogen
