• State Not Answered
  • Replies 6 replies
  • Subscribers 88 subscribers
  • Views 1160 views
  • Users 0 members are here
Attachments (6) Download All
Nordic Case Info
  • Case ID: 350464
Options

nRF54L15 + MCUboot + NCS v3.0.2: Range issue with MCUBoot

ByteSpectrum

Hi,

We’re developing a BLE-based product on the nRF54L15 (InsightSIP ISP2454-LX) using nRF Connect SDK v3.0.2, with MCUboot enabled for DFU.

Our BLE application is based on a custom service and configured to use +8 dBm Tx power. Initially, everything works fine. I am getting good range with +8 dBm Tx power.

I used following macro to achieve same.

CONFIG_BT_CTLR_TX_PWR_DYNAMIC_CONTROL=y
CONFIG_BT_CTLR_TX_PWR_PLUS_8=y
 

Problem:

After enabling MCUboot via sysbuild, the BLE behavior changes. I am getting ~5 times less range. 

We confirmed that this issue only occurs after enabling MCUboot. Without the bootloader, range is very good.

Please help me to get same range after adding MCUBoot.80015.prj.conf5123.mcuboot.conf1803.sysbuild.conf

  • 0

    Hi ByteSpectrum,

    Could you please share the following from the build with MCUboot?

    • The application compiled Kconfig file, located at <build directory>/<application name>/zephyr/.config
    • The MCUboot compiled Kconfig file, located at <build directory>/mcuboot/zephyr/.config
    • Full pristine build log

    Hieu

  • 0 in reply to Hieu

    Hi Hieu,

    Please find attached.

    Thanks,

    Tarun

    Fullscreen pristine_build_log.txt Download 
     *  Executing task: nRF Connect: Generate config vclient_nrf54l15/nrf54l15/cpuapp for d:\nRF54\vclient\v2\fw\source\peripheral_uart 

Building peripheral_uart
west build --build-dir d:/nRF54/vclient/v2/fw/source/peripheral_uart/build d:/nRF54/vclient/v2/fw/source/peripheral_uart --pristine --board vclient_nrf54l15/nrf54l15/cpuapp --sysbuild -- -DBOARD_ROOT="d:/nrf54/vclient/v2/fw/source/peripheral_uart/my_boards;d:/nrf54/vclient/v2/fw/source/peripheral_uart"

-- west build: generating a build system
Loading Zephyr module(s) (Zephyr base): sysbuild_default
-- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter
-- Cache files will be written to: C:/ncs/v3.0.2/zephyr/.cache
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: vclient_nrf54l15, qualifiers: nrf54l15/cpuapp
Parsing d:/nRF54/vclient/v2/fw/source/peripheral_uart/Kconfig.sysbuild
Loaded configuration 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/_sysbuild/empty.conf'
Merged configuration 'd:/nRF54/vclient/v2/fw/source/peripheral_uart/sysbuild.conf'
Configuration saved to 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/zephyr/.config'
Kconfig header saved to 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/_sysbuild/autoconf.h'
--
   *****************************
   * Running CMake for mcuboot *
   *****************************

Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/v3.0.2/bootloader/mcuboot/boot/zephyr
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter
-- Cache files will be written to: C:/ncs/v3.0.2/zephyr/.cache
-- Zephyr version: 4.0.99 (C:/ncs/v3.0.2/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: vclient_nrf54l15, qualifiers: nrf54l15/cpuapp
-- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/0b393f9e1b/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found BOARD.dts: D:/nRF54/vclient/v2/fw/source/peripheral_uart/my_boards/boards/vclient/vclient_nrf54l15/vclient_nrf54l15_nrf54l15_cpuapp.dts
-- Found devicetree overlay: C:/ncs/v3.0.2/bootloader/mcuboot/boot/zephyr/app.overlay
-- Generated zephyr.dts: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/mcuboot/zephyr/zephyr.dts
-- Generated pickled edt: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/mcuboot/zephyr/edt.pickle
-- Generated zephyr.dts: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/mcuboot/zephyr/zephyr.dts
-- Generated devicetree_generated.h: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/mcuboot/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/mcuboot/zephyr/dts.cmake

warning: NRF_RTC_TIMER_USER_CHAN_COUNT (defined at
C:/ncs/v3.0.2/zephyr/soc/nordic\nrf53\Kconfig.sync_rtc:24, drivers/timer/Kconfig.nrf_rtc:20) was
assigned the value '0' but got the value ''. Check these unsatisfied dependencies: ((NRF53_SYNC_RTC
&& SOC_SERIES_NRF53X && SOC_FAMILY_NORDIC_NRF) || (NRF_RTC_TIMER && SYS_CLOCK_EXISTS)) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT and/or look
up NRF_RTC_TIMER_USER_CHAN_COUNT in the menuconfig/guiconfig interface. The Application Development
Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual
might be helpful too.


warning: BT_CTLR_TX_PWR_DYNAMIC_CONTROL (defined at subsys/bluetooth\controller/Kconfig:496) was
assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies: BT_HCI_VS (=n),
HAS_BT_CTLR (=n), BT_HCI (=n), BT (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_BT_CTLR_TX_PWR_DYNAMIC_CONTROL and/or look
up BT_CTLR_TX_PWR_DYNAMIC_CONTROL in the menuconfig/guiconfig interface. The Application Development
Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual
might be helpful too.


warning: LOG_DEFAULT_LEVEL (defined at subsys/logging\Kconfig.filtering:13) was assigned the value
'0' but got the value ''. Check these unsatisfied dependencies: LOG (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_LOG_DEFAULT_LEVEL and/or look up
LOG_DEFAULT_LEVEL in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.


warning: The choice symbol MCUBOOT_LOG_LEVEL_INF (defined at
subsys/logging/Kconfig.template.log_config:17) was selected (set =y), but no symbol ended up as the
choice selection. See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MCUBOOT_LOG_LEVEL_INF
and/or look up MCUBOOT_LOG_LEVEL_INF in the menuconfig/guiconfig interface. The Application
Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of
the manual might be helpful too.


warning: The choice symbol LOG_MODE_MINIMAL (defined at subsys/logging\Kconfig.mode:29) was selected
(set =y), but no symbol ended up as the choice selection. See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_LOG_MODE_MINIMAL and/or look up
LOG_MODE_MINIMAL in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.


warning: The choice symbol BT_CTLR_TX_PWR_PLUS_8 (defined at
subsys/bluetooth\controller/Kconfig:340) was selected (set =y), but no symbol ended up as the choice
selection. See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_BT_CTLR_TX_PWR_PLUS_8 and/or
look up BT_CTLR_TX_PWR_PLUS_8 in the menuconfig/guiconfig interface. The Application Development
Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual
might be helpful too.


warning: Deprecated symbol DEPRECATED_UART_NRFX_UARTE_LEGACY_SHIM is enabled.

Parsing C:/ncs/v3.0.2/bootloader/mcuboot/boot/zephyr/Kconfig
Loaded configuration 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/my_boards/boards/vclient/vclient_nrf54l15/vclient_nrf54l15_nrf54l15_cpuapp_defconfig'
Merged configuration 'C:/ncs/v3.0.2/bootloader/mcuboot/boot/zephyr/prj.conf'
Merged configuration 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/sysbuild/mcuboot.conf'
Merged configuration 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/mcuboot/zephyr/.config.sysbuild'
Configuration saved to 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/mcuboot/zephyr/.config'
Kconfig header saved to 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/mcuboot/zephyr/include/generated/zephyr/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
=========== Generating psa_crypto_config ===============
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Backup: CONFIG_MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT: False
Backup: CONFIG_MBEDTLS_THREADING: False
Backup: CONFIG_MBEDTLS_THREADING_ALT: False
=========== Checkpoint: backup ===============
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Restore: CONFIG_MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT: False
Restore: CONFIG_MBEDTLS_THREADING: False
Restore: CONFIG_MBEDTLS_THREADING_ALT: False
=========== End psa_crypto_config ===============
=========== Generating psa_crypto_library_config ===============
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Backup: CONFIG_MBEDTLS_USE_PSA_CRYPTO: True
Backup: CONFIG_MBEDTLS_PLATFORM_PRINTF_ALT: False
Backup: CONFIG_MBEDTLS_THREADING: False
Backup: CONFIG_MBEDTLS_THREADING_ALT: False
=========== Checkpoint: backup ===============
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Restore: CONFIG_MBEDTLS_USE_PSA_CRYPTO: True
Restore: CONFIG_MBEDTLS_PLATFORM_PRINTF_ALT: False
Restore: CONFIG_MBEDTLS_THREADING: False
Restore: CONFIG_MBEDTLS_THREADING_ALT: False
=========== End psa_crypto_library_config ===============
MCUBoot bootloader key file: D:/nRF54/vclient/v2/fw/source/peripheral_uart/key/root-ed25519.pem
-- Configuring done
-- Generating done
-- Build files have been written to: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/mcuboot
--
   *************************************
   * Running CMake for peripheral_uart *
   *************************************

Loading Zephyr default modules (Zephyr base).
-- Application: D:/nRF54/vclient/v2/fw/source/peripheral_uart
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter
-- Cache files will be written to: C:/ncs/v3.0.2/zephyr/.cache
-- Zephyr version: 4.0.99 (C:/ncs/v3.0.2/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: vclient_nrf54l15, qualifiers: nrf54l15/cpuapp
-- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/0b393f9e1b/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found BOARD.dts: D:/nRF54/vclient/v2/fw/source/peripheral_uart/my_boards/boards/vclient/vclient_nrf54l15/vclient_nrf54l15_nrf54l15_cpuapp.dts
-- Found devicetree overlay: D:/nRF54/vclient/v2/fw/source/peripheral_uart/app.overlay
-- Generated zephyr.dts: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/zephyr.dts
-- Generated pickled edt: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/edt.pickle
-- Generated zephyr.dts: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/zephyr.dts
-- Generated devicetree_generated.h: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/dts.cmake

warning: Deprecated symbol DEPRECATED_UART_NRFX_UARTE_LEGACY_SHIM is enabled.

Parsing D:/nRF54/vclient/v2/fw/source/peripheral_uart/Kconfig
Loaded configuration 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/my_boards/boards/vclient/vclient_nrf54l15/vclient_nrf54l15_nrf54l15_cpuapp_defconfig'
Merged configuration 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/prj.conf'
Merged configuration 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/.config.sysbuild'
Configuration saved to 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/.config'
Kconfig header saved to 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/include/generated/zephyr/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
CMake Warning at C:/ncs/v3.0.2/nrf/samples/common/mcumgr_bt_ota_dfu/CMakeLists.txt:27 (message):
  MCUmgr Bluetooth OTA DFU: suboptimal configuration of Bluetooth Host
  buffers.  Consider using optimal values defined in the
  C:/ncs/v3.0.2/nrf/samples/common/mcumgr_bt_ota_dfu/Kconfig file for
  CONFIG_BT_BUF_ACL_TX_SIZE, CONFIG_BT_BUF_ACL_RX_SIZE and
  CONFIG_BT_L2CAP_TX_MTU options


=========== Generating psa_crypto_config ===============
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Backup: CONFIG_MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT: False
Backup: CONFIG_MBEDTLS_THREADING: False
Backup: CONFIG_MBEDTLS_THREADING_ALT: True
=========== Checkpoint: backup ===============
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Restore: CONFIG_MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT: False
Restore: CONFIG_MBEDTLS_THREADING: False
Restore: CONFIG_MBEDTLS_THREADING_ALT: True
=========== End psa_crypto_config ===============
=========== Generating psa_crypto_library_config ===============
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Backup: CONFIG_MBEDTLS_USE_PSA_CRYPTO: True
Backup: CONFIG_MBEDTLS_PLATFORM_PRINTF_ALT: False
Backup: CONFIG_MBEDTLS_THREADING: False
Backup: CONFIG_MBEDTLS_THREADING_ALT: True
=========== Checkpoint: backup ===============
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Restore: CONFIG_MBEDTLS_USE_PSA_CRYPTO: True
Restore: CONFIG_MBEDTLS_PLATFORM_PRINTF_ALT: False
Restore: CONFIG_MBEDTLS_THREADING: False
Restore: CONFIG_MBEDTLS_THREADING_ALT: True
=========== End psa_crypto_library_config ===============
-- Including signing script: C:/ncs/v3.0.2/nrf/cmake/sysbuild/image_signing.cmake
CMake Warning at C:/ncs/v3.0.2/zephyr/CMakeLists.txt:2180 (message):
  __ASSERT() statements are globally ENABLED


-- Configuring done
-- Generating done
-- Build files have been written to: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart
CMake Warning at C:/ncs/v3.0.2/nrf/cmake/sysbuild/partition_manager.cmake:121 (message):
  

        ---------------------------------------------------------------------
        --- WARNING: Using a bootloader without pm_static.yml.            ---
        --- There are cases where a deployed product can consist of       ---
        --- multiple images, and only a subset of these images can be     ---
        --- upgraded through a firmware update mechanism. In such cases,  ---
        --- the upgradable images must have partitions that are static    ---
        --- and are matching the partition map used by the bootloader     ---
        --- programmed onto the device.                                   ---
        ---------------------------------------------------------------------
        

Call Stack (most recent call first):
  C:/ncs/v3.0.2/nrf/cmake/sysbuild/partition_manager.cmake:620 (partition_manager)
  C:/ncs/v3.0.2/nrf/sysbuild/CMakeLists.txt:779 (include)
  cmake/modules/sysbuild_extensions.cmake:583 (nrf_POST_CMAKE)
  cmake/modules/sysbuild_extensions.cmake:583 (cmake_language)
  cmake/modules/sysbuild_images.cmake:46 (sysbuild_module_call)
  cmake/modules/sysbuild_default.cmake:21 (include)
  C:/ncs/v3.0.2/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  C:/ncs/v3.0.2/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  C:/ncs/v3.0.2/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
  template/CMakeLists.txt:10 (find_package)


-- Configuring done
-- Generating done
-- Build files have been written to: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build
←[92m-- west build: building application
[9/20] Performing build step for 'mcuboot'
[6/295] Generating include/generated/zephyr/version.h
-- Zephyr version: 4.0.99 (C:/ncs/v3.0.2/zephyr), build: v4.0.99-ncs1-2
[11/295] Building C object modules/nrf/subsys/nrf_security/src/core/nrf_oberon/CMakeFiles/oberon_psa_core.dir/C_/ncs/v3.0.2/modules/crypto/oberon-psa-crypto/library/psa_crypto_slot_ma[295/295] Linking C executable zephyr\zephyr.elf
Memory region         Used Size  Region Size  %age Used
           FLASH:       47624 B        54 KB     86.13%
             RAM:       22160 B       188 KB     11.51%
        IDT_LIST:          0 GB        32 KB      0.00%
Generating files from D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/mcuboot/zephyr/zephyr.elf for board: vclient_nrf54l15
[11/20] Performing build step for 'peripheral_uart'
[0/1] Re-running CMake...
Loading Zephyr default modules (Zephyr base (cached)).
-- Application: D:/nRF54/vclient/v2/fw/source/peripheral_uart
-- CMake version: 3.21.0
-- Cache files will be written to: C:/ncs/v3.0.2/zephyr/.cache
-- Zephyr version: 4.0.99 (C:/ncs/v3.0.2/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: vclient_nrf54l15, qualifiers: nrf54l15/cpuapp
-- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found BOARD.dts: D:/nRF54/vclient/v2/fw/source/peripheral_uart/my_boards/boards/vclient/vclient_nrf54l15/vclient_nrf54l15_nrf54l15_cpuapp.dts
-- Found devicetree overlay: D:/nRF54/vclient/v2/fw/source/peripheral_uart/app.overlay
-- Generated zephyr.dts: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/zephyr.dts
-- Generated pickled edt: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/edt.pickle
-- Generated zephyr.dts: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/zephyr.dts
-- Generated devicetree_generated.h: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/dts.cmake

warning: Deprecated symbol DEPRECATED_UART_NRFX_UARTE_LEGACY_SHIM is enabled.

Parsing D:/nRF54/vclient/v2/fw/source/peripheral_uart/Kconfig
Loaded configuration 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/.config'
Merged configuration 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/.config.sysbuild'
No change to configuration in 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/.config'
No change to Kconfig header in 'D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/include/generated/zephyr/autoconf.h'
CMake Warning at C:/ncs/v3.0.2/nrf/samples/common/mcumgr_bt_ota_dfu/CMakeLists.txt:27 (message):
  MCUmgr Bluetooth OTA DFU: suboptimal configuration of Bluetooth Host
  buffers.  Consider using optimal values defined in the
  C:/ncs/v3.0.2/nrf/samples/common/mcumgr_bt_ota_dfu/Kconfig file for
  CONFIG_BT_BUF_ACL_TX_SIZE, CONFIG_BT_BUF_ACL_RX_SIZE and
  CONFIG_BT_L2CAP_TX_MTU options


=========== Generating psa_crypto_config ===============
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Backup: CONFIG_MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT: False
Backup: CONFIG_MBEDTLS_THREADING: False
Backup: CONFIG_MBEDTLS_THREADING_ALT: True
=========== Checkpoint: backup ===============
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Restore: CONFIG_MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT: False
Restore: CONFIG_MBEDTLS_THREADING: False
Restore: CONFIG_MBEDTLS_THREADING_ALT: True
=========== End psa_crypto_config ===============
=========== Generating psa_crypto_library_config ===============
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Backup: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Backup: CONFIG_MBEDTLS_USE_PSA_CRYPTO: True
Backup: CONFIG_MBEDTLS_PLATFORM_PRINTF_ALT: False
Backup: CONFIG_MBEDTLS_THREADING: False
Backup: CONFIG_MBEDTLS_THREADING_ALT: True
=========== Checkpoint: backup ===============
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_C: True
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False
Restore: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False
Restore: CONFIG_MBEDTLS_USE_PSA_CRYPTO: True
Restore: CONFIG_MBEDTLS_PLATFORM_PRINTF_ALT: False
Restore: CONFIG_MBEDTLS_THREADING: False
Restore: CONFIG_MBEDTLS_THREADING_ALT: True
=========== End psa_crypto_library_config ===============
-- Including signing script: C:/ncs/v3.0.2/nrf/cmake/sysbuild/image_signing.cmake
CMake Warning at C:/ncs/v3.0.2/zephyr/CMakeLists.txt:2180 (message):
  __ASSERT() statements are globally ENABLED


-- Configuring done
-- Generating done
-- Build files have been written to: D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart
[6/426] Generating include/generated/zephyr/version.h
-- Zephyr version: 4.0.99 (C:/ncs/v3.0.2/zephyr), build: v4.0.99-ncs1-2
[39/426] Building C object modules/nrf/subsys/nrf_security/src/core/nrf_oberon/CMakeFiles/oberon_psa_core.dir/C_/ncs/v3.0.2/modules/crypto/oberon-psa-crypto/library/psa_crypto_client.[41/426] Building C object modules/nrf/subsys/nrf_security/src/core/nrf_oberon/CMakeFiles/oberon_psa_core.dir/C_/ncs/v3.0.2/modules/crypto/oberon-psa-crypto/library/psa_crypto_storage[43/426] Building C object modules/nrf/subsys/nrf_security/src/core/nrf_oberon/CMakeFiles/oberon_psa_core.dir/C_/ncs/v3.0.2/modules/crypto/oberon-psa-crypto/library/platform_util.c.ob[52/426] Building C object modules/nrf/subsys/nrf_security/src/core/nrf_oberon/CMakeFiles/oberon_psa_core.dir/C_/ncs/v3.0.2/modules/crypto/oberon-psa-crypto/library/platform_util.c.ob[54/426] Building C object modules/nrf/subsys/nrf_security/src/core/nrf_oberon/CMakeFiles/oberon_psa_core.dir/C_/ncs/v3.0.2/modules/crypto/oberon-psa-crypto/library/psa_crypto_slot_ma[352/426] Building C object modules/hal_nordic/modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v3.0.2/modules/hal/nordic/nrfx/helpers/nrfx_flag32_allocator.c.o[426/426] Linking C executable zephyr\zephyr.elf
Memory region         Used Size  Region Size  %age Used
           FLASH:      322508 B       670 KB     47.01%
             RAM:      151836 B       188 KB     78.87%
        IDT_LIST:          0 GB        32 KB      0.00%
Generating files from D:/nRF54/vclient/v2/fw/source/peripheral_uart/build/peripheral_uart/zephyr/zephyr.elf for board: vclient_nrf54l15
image.py: sign the digest
image.py: sign the digest
[20/20] Generating ../merged.hex
 *  Terminal will be reused by tasks, press any key to close it.
    app.config
    Fullscreen 3034.mcuboot.config Download 
    #
# MCUboot-specific configuration options
#
# CONFIG_BOOT_USE_MIN_PARTITION_SIZE is not set
CONFIG_PM_PARTITION_SIZE_MCUBOOT_SCRATCH=0x1e000
CONFIG_PM_PARTITION_SIZE_MCUBOOT_PAD=0x800
CONFIG_PM_PARTITION_SIZE_MCUBOOT=0xd800
CONFIG_MCUBOOT_NRF_CLEANUP_PERIPHERAL=y
CONFIG_BOOT_SIGNATURE_KEY_FILE="D:/nRF54/vertex/v2/fw/source/peripheral_uart/key/root-ed25519.pem"
CONFIG_BOOT_ERASE_PROGRESSIVELY=y
# CONFIG_BOOT_IMAGE_ACCESS_HOOKS is not set
# CONFIG_MCUBOOT_CLEANUP_UNUSABLE_SECONDARY is not set
CONFIG_MCUBOOT=y
CONFIG_BOOT_USE_PSA_CRYPTO=y
# CONFIG_NRF_CC310_BL is not set
CONFIG_BOOT_ED25519_PSA_DEPENDENCIES=y
CONFIG_MBEDTLS_HEAP_SIZE=2048

#
# MCUBoot settings
#
# CONFIG_SINGLE_APPLICATION_SLOT is not set
CONFIG_BOOT_IMG_HASH_ALG_SHA256_ALLOW=y
CONFIG_BOOT_IMG_HASH_ALG_SHA512_ALLOW=y
# CONFIG_BOOT_IMG_HASH_DIRECTLY_ON_STORAGE is not set
# CONFIG_BOOT_IMG_HASH_ALG_SHA256 is not set
CONFIG_BOOT_IMG_HASH_ALG_SHA512=y
CONFIG_BOOT_SIGNATURE_TYPE_PURE_ALLOW=y
# CONFIG_BOOT_SIGNATURE_TYPE_NONE is not set
# CONFIG_BOOT_SIGNATURE_TYPE_RSA is not set
# CONFIG_BOOT_SIGNATURE_TYPE_ECDSA_P256 is not set
CONFIG_BOOT_SIGNATURE_TYPE_ED25519=y
# CONFIG_BOOT_SIGNATURE_TYPE_PURE is not set
# CONFIG_BOOT_ED25519_TINYCRYPT is not set
# CONFIG_BOOT_ED25519_MBEDTLS is not set
CONFIG_BOOT_ED25519_PSA=y
# CONFIG_BOOT_KEY_IMPORT_BYPASS_ASN is not set
# CONFIG_BOOT_SIGNATURE_USING_KMU is not set
# CONFIG_BOOT_KEYS_REVOCATION is not set
CONFIG_MCUBOOT_CLEANUP_ARM_CORE=y
# CONFIG_MCUBOOT_CLEANUP_RAM is not set
CONFIG_NRF_SECURITY=y
CONFIG_MBEDTLS_CFG_FILE="nrf-config.h"
# CONFIG_BOOT_HW_KEY is not set
CONFIG_BOOT_VALIDATE_SLOT0=y
# CONFIG_BOOT_PREFER_SWAP_OFFSET is not set
CONFIG_BOOT_PREFER_SWAP_MOVE=y
# CONFIG_BOOT_SWAP_USING_SCRATCH is not set
# CONFIG_BOOT_UPGRADE_ONLY is not set
# CONFIG_BOOT_SWAP_USING_OFFSET is not set
CONFIG_BOOT_SWAP_USING_MOVE=y
# CONFIG_BOOT_DIRECT_XIP is not set
# CONFIG_BOOT_RAM_LOAD is not set
# CONFIG_BOOT_FIRMWARE_LOADER is not set
# CONFIG_BOOT_BOOTSTRAP is not set
# CONFIG_SINGLE_APPLICATION_SLOT_RAM_LOAD is not set
CONFIG_BOOT_ENCRYPTION_SUPPORT=y
# CONFIG_BOOT_ENCRYPT_IMAGE is not set
# CONFIG_BOOT_MAX_IMG_SECTORS_AUTO is not set
CONFIG_BOOT_MAX_IMG_SECTORS=256
CONFIG_BOOT_SHARE_BACKEND_DISABLED=y
# CONFIG_BOOT_SHARE_BACKEND_EXTERNAL is not set
CONFIG_BOOT_FIH_PROFILE_OFF=y
# CONFIG_BOOT_FIH_PROFILE_LOW is not set
# CONFIG_BOOT_FIH_PROFILE_MEDIUM is not set
# CONFIG_BOOT_FIH_PROFILE_HIGH is not set
CONFIG_BOOT_USB_DFU_NO=y
# CONFIG_BOOT_USB_DFU_WAIT is not set
# CONFIG_BOOT_USB_DFU_GPIO is not set
# CONFIG_BOOT_USB_DFU_NO_APPLICATION is not set
# CONFIG_BOOT_USE_BENCH is not set
# CONFIG_MCUBOOT_INDICATION_LED is not set
# CONFIG_MCUBOOT_SERIAL is not set
# CONFIG_BOOT_INTR_VEC_RELOC is not set
CONFIG_UPDATEABLE_IMAGE_NUMBER=1
CONFIG_BOOT_WATCHDOG_FEED=y
CONFIG_BOOT_WATCHDOG_FEED_NRFX_WDT=y
# CONFIG_BOOT_GO_HOOKS is not set
# CONFIG_BOOT_FLASH_AREA_HOOKS is not set
# CONFIG_MCUBOOT_ACTION_HOOKS is not set
CONFIG_BOOT_DISABLE_CACHES=y

#
# Defaults
#
# CONFIG_BOOT_FIH_PROFILE_DEFAULT_LOW is not set
# CONFIG_BOOT_FIH_PROFILE_DEFAULT_MEDIUM is not set
# CONFIG_BOOT_FIH_PROFILE_DEFAULT_HIGH is not set
# end of Defaults
# end of MCUBoot settings

CONFIG_MCUBOOT_DEVICE_SETTINGS=y

#
# Zephyr configuration options
#
# CONFIG_MULTITHREADING is not set
CONFIG_USB_DEVICE_PRODUCT="MCUBOOT"
# CONFIG_INPUT is not set
# CONFIG_WIFI is not set
# CONFIG_MIPI_DSI is not set
# CONFIG_MODEM is not set
CONFIG_ROM_START_OFFSET=0
CONFIG_NUM_IRQS=271
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=1000000
CONFIG_FLASH_SIZE=1428
CONFIG_FLASH_BASE_ADDRESS=0x0
CONFIG_MP_MAX_NUM_CPUS=1
CONFIG_SOC_RESET_HOOK=y
CONFIG_MAIN_STACK_SIZE=10240
CONFIG_IDLE_STACK_SIZE=320
CONFIG_ISR_STACK_SIZE=2048
CONFIG_CLOCK_CONTROL=y
CONFIG_SYS_CLOCK_TICKS_PER_SEC=31250
CONFIG_KERNEL_ENTRY="__start"
CONFIG_BUILD_OUTPUT_BIN=y
CONFIG_XIP=y
CONFIG_HAS_FLASH_LOAD_OFFSET=y
# CONFIG_SRAM_VECTOR_TABLE is not set
CONFIG_CPU_HAS_ARM_MPU=y
# CONFIG_COUNTER is not set
# CONFIG_SHARED_INTERRUPTS is not set
# CONFIG_PM_DEVICE is not set
CONFIG_TICKLESS_KERNEL=y
# CONFIG_FPU is not set
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=1024
CONFIG_CLOCK_CONTROL_INIT_PRIORITY=30
CONFIG_USE_DT_CODE_PARTITION=y
# CONFIG_MULTI_LEVEL_INTERRUPTS is not set
CONFIG_CACHE_MANAGEMENT=y
CONFIG_GEN_IRQ_VECTOR_TABLE=y
# CONFIG_DYNAMIC_INTERRUPTS is not set
CONFIG_GEN_ISR_TABLES=y
# CONFIG_INIT_STACKS is not set
CONFIG_FLASH_LOAD_OFFSET=0x0
# CONFIG_REGULATOR is not set
CONFIG_SYS_CLOCK_EXISTS=y
CONFIG_INIT_ARCH_HW_AT_BOOT=y
# CONFIG_BUILD_OUTPUT_S19 is not set
CONFIG_FLASH_FILL_BUFFER_SIZE=32
CONFIG_ARCH_HAS_CUSTOM_BUSY_WAIT=y
CONFIG_HW_STACK_PROTECTION=y
# CONFIG_MFD is not set
CONFIG_GPIO=y
# CONFIG_SERIAL is not set
# CONFIG_CPU_HAS_CUSTOM_FIXED_SOC_MPU_REGIONS is not set
# CONFIG_SPI is not set
# CONFIG_CODE_DATA_RELOCATION_SRAM is not set
# CONFIG_MEMC is not set
CONFIG_CACHE=y
# CONFIG_LOG is not set
CONFIG_CMSIS_CORE_HAS_SYSTEM_CORE_CLOCK=y
# CONFIG_CODE_DATA_RELOCATION is not set
# CONFIG_ROMSTART_RELOCATION_ROM is not set
CONFIG_DCACHE_LINE_SIZE=32
# CONFIG_RESET is not set
CONFIG_ARCH_SW_ISR_TABLE_ALIGN=4
# CONFIG_NRF_RTC_TIMER is not set
# CONFIG_ASSERT is not set
CONFIG_CACHE_NRF_CACHE=y
CONFIG_BUILD_OUTPUT_HEX=y
# CONFIG_SYSCON is not set
# CONFIG_INTC_MTK_ADSP is not set
# CONFIG_MTK_ADSP_TIMER is not set
# CONFIG_CONSOLE is not set
# CONFIG_WINSTREAM is not set
CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE=0
CONFIG_SOC_TOOLCHAIN_NAME="amd_acp_6_0_adsp"
CONFIG_GEN_SW_ISR_TABLE=y
# CONFIG_REBOOT is not set
CONFIG_FLASH_INIT_PRIORITY=50
CONFIG_GEN_IRQ_START_VECTOR=0
CONFIG_SRAM_OFFSET=0
# CONFIG_POWER_DOMAIN is not set
CONFIG_ARCH_IRQ_VECTOR_TABLE_ALIGN=4
# CONFIG_SPI_NOR is not set
CONFIG_MINIMAL_LIBC_OPTIMIZE_STRING_FOR_SIZE=y
# CONFIG_SCHED_CPU_MASK is not set
# CONFIG_WATCHDOG is not set
CONFIG_ICACHE_LINE_SIZE=32
CONFIG_PRIVILEGED_STACK_SIZE=1024

#
# Devicetree Info
#
CONFIG_DT_HAS_ARM_ARMV8M_ITM_ENABLED=y
CONFIG_DT_HAS_ARM_CORTEX_M33F_ENABLED=y
CONFIG_DT_HAS_ARM_V8M_NVIC_ENABLED=y
CONFIG_DT_HAS_BOSCH_BMI270_ENABLED=y
CONFIG_DT_HAS_BOSCH_BMM350_ENABLED=y
CONFIG_DT_HAS_FIXED_CLOCK_ENABLED=y
CONFIG_DT_HAS_FIXED_PARTITIONS_ENABLED=y
CONFIG_DT_HAS_GPIO_KEYS_ENABLED=y
CONFIG_DT_HAS_GPIO_LEDS_ENABLED=y
CONFIG_DT_HAS_JEDEC_SPI_NOR_ENABLED=y
CONFIG_DT_HAS_MMIO_SRAM_ENABLED=y
CONFIG_DT_HAS_NORDIC_BT_HCI_SDC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_CLOCK_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_DPPIC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_FICR_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_GPIO_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_GPIOTE_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_GRTC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_HFXO_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_IEEE802154_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_LFXO_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_PINCTRL_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_PPIB_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_RADIO_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_SAADC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_SPIM_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_TEMP_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_TWIM_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_UICR_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF54L_REGULATORS_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF5X_REGULATOR_ENABLED=y
CONFIG_DT_HAS_NORDIC_RRAM_CONTROLLER_ENABLED=y
CONFIG_DT_HAS_SOC_NV_FLASH_ENABLED=y
CONFIG_DT_HAS_VOLTAGE_DIVIDER_ENABLED=y
CONFIG_DT_HAS_ZEPHYR_BT_HCI_ENTROPY_ENABLED=y
CONFIG_DT_HAS_ZEPHYR_PSA_CRYPTO_RNG_ENABLED=y
# end of Devicetree Info

#
# Modules
#
# CONFIG_BUILD_ONLY_NO_BLOBS is not set

#
# Available modules.
#

#
# nrf (C:/ncs/v3.0.2/nrf)
#
CONFIG_NUM_METAIRQ_PRIORITIES=0
CONFIG_MBEDTLS_PROMPTLESS=y
CONFIG_MBEDTLS_PSA_KEY_SLOT_COUNT=32
CONFIG_MPSL_WORK_STACK_SIZE=1024
# CONFIG_ZMS is not set
# CONFIG_NVS is not set
# CONFIG_MBEDTLS_MD_C is not set
# CONFIG_MBEDTLS_TLS_LIBRARY is not set
# CONFIG_MBEDTLS_X509_LIBRARY is not set
CONFIG_MBEDTLS_ENABLE_HEAP=y
# CONFIG_MBEDTLS_PSA_CRYPTO_STORAGE_C is not set
# CONFIG_MBEDTLS_LEGACY_CRYPTO_C is not set

#
# Nordic nRF Connect
#
CONFIG_WARN_EXPERIMENTAL=y
CONFIG_NORDIC_QSPI_NOR_FLASH_LAYOUT_PAGE_SIZE=4096
# CONFIG_GETOPT is not set
CONFIG_NRF_SECURITY_ENABLER=y
# CONFIG_NCS_SAMPLES_DEFAULTS is not set

#
# Image build variants
#
# CONFIG_NCS_MCUBOOT_IN_BUILD is not set
# end of Image build variants

#
# Subsystems
#

#
# Bootloader
#
# CONFIG_SECURE_BOOT is not set
CONFIG_PM_PARTITION_SIZE_PROVISION=0x460
# CONFIG_B0_MIN_PARTITION_SIZE is not set
CONFIG_PM_PARTITION_SIZE_B0_IMAGE=0x7800
# CONFIG_IS_SECURE_BOOTLOADER is not set
CONFIG_IS_BOOTLOADER_IMG=y
# CONFIG_SECURE_BOOT_CRYPTO is not set

#
# Secure Boot firmware validation
#
CONFIG_SB_VALIDATION_INFO_MAGIC=0x86518483
CONFIG_SB_VALIDATION_POINTER_MAGIC=0x6919b47e
CONFIG_SB_VALIDATION_INFO_CRYPTO_ID=1
CONFIG_SB_VALIDATION_INFO_VERSION=2
CONFIG_SB_VALIDATION_METADATA_OFFSET=0
CONFIG_SB_VALIDATION_STRUCT_HAS_HASH=y
CONFIG_SB_VALIDATION_STRUCT_HAS_PUBLIC_KEY=y
CONFIG_SB_VALIDATE_FW_SIGNATURE=y
# end of Secure Boot firmware validation

# CONFIG_SECURE_BOOT_STORAGE is not set
# CONFIG_MCUBOOT_COMPRESSED_IMAGE_SUPPORT_ENABLED is not set
# CONFIG_MCUBOOT_BOOTLOADER_SIGNATURE_TYPE_ED25519 is not set
# CONFIG_MCUBOOT_BOOTLOADER_SIGNATURE_TYPE_PURE is not set
# end of Bootloader

#
# Bluetooth Low Energy
#
CONFIG_SYSTEM_WORKQUEUE_PRIORITY=-2

#
# BLE over nRF RPC
#
CONFIG_HEAP_MEM_POOL_SIZE=0
# end of BLE over nRF RPC
# end of Bluetooth Low Energy

#
# DFU
#
# CONFIG_DFU_MULTI_IMAGE is not set
# CONFIG_DFU_TARGET is not set
# end of DFU

# CONFIG_ESB is not set

#
# Peripheral CPU DFU (PCD)
#
# CONFIG_PCD is not set
# CONFIG_PCD_APP is not set
CONFIG_PCD_VERSION_PAGE_BUF_SIZE=2046
# CONFIG_PCD_NET is not set
# end of Peripheral CPU DFU (PCD)

#
# Networking
#

#
# Application protocols
#
# CONFIG_NRF_CLOUD is not set
# CONFIG_REST_CLIENT is not set
# CONFIG_DOWNLOAD_CLIENT is not set
# CONFIG_DOWNLOADER is not set
# CONFIG_AWS_IOT is not set
# CONFIG_AWS_JOBS is not set
# CONFIG_AZURE_IOT_HUB is not set

#
# Self-Registration (Zi ZHu Ce)
#
# end of Self-Registration (Zi ZHu Ce)

# CONFIG_ICAL_PARSER is not set
# CONFIG_FTP_CLIENT is not set
# CONFIG_LWM2M_CLIENT_UTILS is not set
# CONFIG_MQTT_HELPER is not set
# CONFIG_NRF_MCUMGR_SMP_CLIENT is not set
# end of Application protocols

# CONFIG_OPENTHREAD_RPC is not set
# end of Networking

#
# NFC
#
# CONFIG_NFC_NDEF is not set
# CONFIG_NFC_NDEF_PARSER is not set
# CONFIG_NFC_NDEF_PAYLOAD_TYPE_COMMON is not set
# CONFIG_NFC_T2T_PARSER is not set
# CONFIG_NFC_T4T_NDEF_FILE is not set
# CONFIG_NFC_T4T_ISODEP is not set
# CONFIG_NFC_T4T_APDU is not set
# CONFIG_NFC_T4T_CC_FILE is not set
# CONFIG_NFC_T4T_HL_PROCEDURE is not set
# CONFIG_NFC_PLATFORM is not set
# CONFIG_NFC_TNEP_TAG is not set
# CONFIG_NFC_TNEP_POLLER is not set
# CONFIG_NFC_TNEP_CH is not set
# CONFIG_NFC_RPC is not set
# end of NFC

# CONFIG_APP_EVENT_MANAGER is not set
# CONFIG_NRF_PROFILER is not set
# CONFIG_FW_INFO is not set

#
# Debug
#
# CONFIG_CPU_LOAD is not set
# CONFIG_PPI_TRACE is not set
# end of Debug

#
# Multiprotocol service layer (MPSL)
#
# CONFIG_MPSL_FEM_ONLY is not set
# CONFIG_MPSL_FEM_DEVICE_CONFIG_254 is not set
CONFIG_MPSL_THREAD_COOP_PRIO=8
CONFIG_MPSL_TIMESLOT_SESSION_COUNT=0
# CONFIG_MPSL_ASSERT_HANDLER is not set
CONFIG_MPSL_LOW_PRIO_IRQN=28
CONFIG_MPSL_HFCLK_LATENCY=854
CONFIG_MPSL_INIT_PRIORITY=40
# end of Multiprotocol service layer (MPSL)

#
# Partition Manager
#
CONFIG_PARTITION_MANAGER_ENABLED=y
CONFIG_FLASH_MAP_CUSTOM=y
CONFIG_SRAM_SIZE=188
CONFIG_SRAM_BASE_ADDRESS=0x20000000
CONFIG_NRF_TRUSTZONE_FLASH_REGION_SIZE=0
CONFIG_NRF_TRUSTZONE_RAM_REGION_SIZE=0

#
# Zephyr subsystem configurations
#
# end of Zephyr subsystem configurations

#
# NCS subsystem configurations
#
CONFIG_PM_EXTERNAL_FLASH_BASE=0
CONFIG_PM_EXTERNAL_FLASH_PATH=""
CONFIG_PM_EXTERNAL_FLASH_SIZE_BITS=0
# CONFIG_PM_EXTERNAL_FLASH_MCUBOOT_SECONDARY is not set
# CONFIG_PM_OVERRIDE_EXTERNAL_DRIVER_CHECK is not set
CONFIG_PM_SRAM_BASE=0x20000000
CONFIG_PM_SRAM_SIZE=0x2f000
# end of Partition Manager

#
# nRF RPC (Remote Procedure Call) library
#
# end of nRF RPC (Remote Procedure Call) library

#
# Full Modem Firmware Update Management(FMFU)
#
# end of Full Modem Firmware Update Management(FMFU)

#
# Additional MCUmgr configuration
#

#
# Additional MCUmgr group configuration
#

#
# Additional MCUmgr OS group management functionality
#
# end of Additional MCUmgr OS group management functionality
# end of Additional MCUmgr group configuration
# end of Additional MCUmgr configuration

# CONFIG_CAF is not set

#
# Nordic IEEE 802.15.4
#
# end of Nordic IEEE 802.15.4

# CONFIG_DM_MODULE is not set

#
# nRF Security
#
# CONFIG_NORDIC_SECURITY_BACKEND is not set

#
# Nordic-added meta types
#
CONFIG_PSA_HAS_ASYM_SIGN_SUPPORT=y
CONFIG_PSA_HAS_HASH_SUPPORT=y
CONFIG_PSA_HAS_KEY_SUPPORT=y

#
# Nordic added alg types
#
# CONFIG_PSA_WANT_ALG_ECDSA_ANY is not set
# CONFIG_PSA_WANT_ALG_ED25519PH is not set
# CONFIG_PSA_WANT_ALG_ED448PH is not set
CONFIG_PSA_WANT_ALG_PURE_EDDSA=y
# CONFIG_PSA_WANT_ALG_RSA_PKCS1V15_SIGN_RAW is not set
# CONFIG_PSA_WANT_ALG_RSA_PSS_ANY_SALT is not set
# CONFIG_PSA_WANT_ALG_SHA_512_224 is not set
# CONFIG_PSA_WANT_ALG_SHA_512_256 is not set
# CONFIG_PSA_WANT_ALG_SPAKE2P_HMAC is not set
# CONFIG_PSA_WANT_ALG_SPAKE2P_CMAC is not set
# CONFIG_PSA_WANT_ALG_SPAKE2P_MATTER is not set
# CONFIG_PSA_WANT_ALG_SRP_6 is not set
# CONFIG_PSA_WANT_ALG_SRP_PASSWORD_HASH is not set
# CONFIG_PSA_WANT_ALG_XTS is not set
# CONFIG_PSA_WANT_ALG_ECB_NO_PADDING is not set
# CONFIG_PSA_WANT_ALG_CHACHA20 is not set
# CONFIG_PSA_WANT_ALG_SHAKE256_512 is not set

#
# Nordic added ECC curve types
#
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_160 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_192 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_224 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_320 is not set
CONFIG_PSA_WANT_ECC_TWISTED_EDWARDS_255=y
# CONFIG_PSA_WANT_ECC_TWISTED_EDWARDS_448 is not set
# CONFIG_PSA_WANT_ECC_SECP_K1_224 is not set
# CONFIG_PSA_WANT_ECC_SECP_R2_160 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_163 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_233 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_239 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_283 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_409 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_571 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_163 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_233 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_283 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_409 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_571 is not set
# CONFIG_PSA_WANT_ECC_SECT_R2_163 is not set
# CONFIG_PSA_WANT_ECC_FRP_V1_256 is not set

#
# Nordic addded RNG configuration
#
# CONFIG_PSA_WANT_GENERATE_RANDOM is not set

#
# Nordic added key types
#
# CONFIG_PSA_WANT_KEY_TYPE_PEPPER is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_IMPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_EXPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_GENERATE is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_DERIVE is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_PUBLIC_KEY is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_IMPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_EXPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_GENERATE is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_DERIVE is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_PUBLIC_KEY is not set
# CONFIG_PSA_WANT_KEY_TYPE_WPA3_SAE_PT is not set
CONFIG_MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS=y
CONFIG_MBEDTLS_PSA_CRYPTO_CONFIG=y
CONFIG_MBEDTLS_PSA_CRYPTO_CONFIG_FILE="nrf-psa-crypto-config.h"
CONFIG_MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE="nrf-psa-crypto-user-config.h"
CONFIG_MBEDTLS_PSA_CRYPTO_C=y
CONFIG_PSA_CORE_OBERON=y
# CONFIG_PSA_CORE_LITE is not set

#
# PSA Driver Support
#
CONFIG_MBEDTLS_PSA_CRYPTO_DRIVERS=y
CONFIG_MBEDTLS_PSA_CRYPTO_CLIENT=y
# CONFIG_PSA_CRYPTO_DRIVER_OBERON is not set
CONFIG_PSA_CRYPTO_DRIVER_CRACEN=y

#
# Choose DRBG algorithm
#
# end of Choose DRBG algorithm

#
# CryptoCell PSA Driver Configuration
#
# end of CryptoCell PSA Driver Configuration

#
# CRACEN PSA Driver Configuration
#
# CONFIG_PSA_USE_CRACEN_CIPHER_DRIVER is not set
# CONFIG_PSA_USE_CRACEN_AEAD_DRIVER is not set
CONFIG_PSA_USE_CRACEN_HASH_DRIVER=y
# CONFIG_PSA_USE_CRACEN_MAC_DRIVER is not set
# CONFIG_PSA_USE_CRACEN_KEY_AGREEMENT_DRIVER is not set
CONFIG_PSA_USE_CRACEN_ASYMMETRIC_DRIVER=y
CONFIG_PSA_USE_CRACEN_KEY_MANAGEMENT_DRIVER=y
# CONFIG_PSA_USE_CRACEN_KEY_DERIVATION_DRIVER is not set
# CONFIG_PSA_USE_CRACEN_PAKE_DRIVER is not set
CONFIG_PSA_USE_CRACEN_ASYMMETRIC_SIGNATURE_DRIVER=y
CONFIG_PSA_USE_CRACEN_CTR_DRBG_DRIVER=y
# end of CRACEN PSA Driver Configuration

#
# AES key size configuration
#
CONFIG_PSA_WANT_AES_KEY_SIZE_128=y
CONFIG_PSA_WANT_AES_KEY_SIZE_192=y
CONFIG_PSA_WANT_AES_KEY_SIZE_256=y
# end of AES key size configuration

#
# RSA key size configuration
#
# CONFIG_PSA_WANT_RSA_KEY_SIZE_1024 is not set
# CONFIG_PSA_WANT_RSA_KEY_SIZE_1536 is not set
# CONFIG_PSA_WANT_RSA_KEY_SIZE_2048 is not set
# CONFIG_PSA_WANT_RSA_KEY_SIZE_3072 is not set
# CONFIG_PSA_WANT_RSA_KEY_SIZE_4096 is not set
# CONFIG_PSA_WANT_RSA_KEY_SIZE_6144 is not set
# CONFIG_PSA_WANT_RSA_KEY_SIZE_8192 is not set
CONFIG_PSA_MAX_RSA_KEY_BITS=0
# end of RSA key size configuration

CONFIG_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_IMPORT_MONTGOMERY_255=y
CONFIG_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_IMPORT_TWISTED_EDWARDS_255=y
CONFIG_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY_MONTGOMERY_255=y
CONFIG_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY_TWISTED_EDWARDS_255=y
CONFIG_PSA_ACCEL_PURE_EDDSA_TWISTED_EDWARDS_255=y
CONFIG_PSA_ACCEL_SHA_256=y
CONFIG_PSA_ACCEL_SHA_512=y
CONFIG_CRACEN_HW_PRESENT=y
CONFIG_CRACEN_HW_VERSION_BASE=y
CONFIG_CRACEN_LOAD_MICROCODE=y
CONFIG_CRACEN_LIB_KMU=y
CONFIG_CRACEN_IKG_SEED_LOAD=y
CONFIG_CRACEN_IKG_SEED_KMU_SLOT=183
CONFIG_PSA_NEED_CRACEN_PURE_EDDSA_TWISTED_EDWARDS_255=y
CONFIG_PSA_NEED_CRACEN_PURE_EDDSA_TWISTED_EDWARDS=y
CONFIG_PSA_NEED_CRACEN_ASYMMETRIC_SIGNATURE_ANY_ECC=y
CONFIG_PSA_NEED_CRACEN_ASYMMETRIC_SIGNATURE_DRIVER=y
CONFIG_PSA_NEED_CRACEN_SHA_256=y
CONFIG_PSA_NEED_CRACEN_SHA_512=y
CONFIG_PSA_NEED_CRACEN_HASH_DRIVER=y
CONFIG_PSA_NEED_CRACEN_KEY_TYPE_ECC_PUBLIC_KEY_MONTGOMERY_255=y
CONFIG_PSA_NEED_CRACEN_KEY_TYPE_ECC_KEY_PAIR_IMPORT_MONTGOMERY_255=y
CONFIG_PSA_NEED_CRACEN_KEY_TYPE_ECC_MONTGOMERY_255=y
CONFIG_PSA_NEED_CRACEN_KEY_TYPE_ECC_MONTGOMERY=y
CONFIG_PSA_NEED_CRACEN_KEY_TYPE_ECC_PUBLIC_KEY_TWISTED_EDWARDS_255=y
CONFIG_PSA_NEED_CRACEN_KEY_TYPE_ECC_KEY_PAIR_IMPORT_TWISTED_EDWARDS_255=y
CONFIG_PSA_NEED_CRACEN_KEY_TYPE_ECC_TWISTED_EDWARDS_255=y
CONFIG_PSA_NEED_CRACEN_KEY_TYPE_ECC_TWISTED_EDWARDS=y
CONFIG_PSA_NEED_CRACEN_KEY_TYPE_ECC_PUBLIC_KEY=y
CONFIG_PSA_NEED_CRACEN_KEY_TYPE_ECC_KEY_PAIR_IMPORT=y
CONFIG_PSA_NEED_CRACEN_KEY_MANAGEMENT_DRIVER=y
CONFIG_PSA_NEED_CRACEN_KMU_DRIVER=y

#
# PSA API support
#
CONFIG_MBEDTLS_USE_PSA_CRYPTO=y
# CONFIG_MBEDTLS_PSA_STATIC_KEY_SLOTS is not set
# end of PSA API support

CONFIG_MBEDTLS_PLATFORM_MEMORY=y
CONFIG_MBEDTLS_PLATFORM_C=y
CONFIG_MBEDTLS_MEMORY_C=y
CONFIG_MBEDTLS_MEMORY_BUFFER_ALLOC_C=y
CONFIG_MBEDTLS_BASE64_C=y
CONFIG_MBEDTLS_OID_C=y
CONFIG_MBEDTLS_ASN1_WRITE_C=y
CONFIG_MBEDTLS_ASN1_PARSE_C=y
CONFIG_MBEDTLS_ENTROPY_HARDWARE_ALT=y
CONFIG_MBEDTLS_ENTROPY_FORCE_SHA256=y
CONFIG_MBEDTLS_ENTROPY_MAX_SOURCES=1
CONFIG_MBEDTLS_NO_PLATFORM_ENTROPY=y
# CONFIG_NRF_SECURITY_ADVANCED is not set

#
# Legacy mbed TLS crypto APIs
#
CONFIG_MBEDTLS_MPI_WINDOW_SIZE=6
CONFIG_MBEDTLS_MPI_MAX_SIZE=256
# CONFIG_MBEDTLS_CIPHER_C is not set
# CONFIG_MBEDTLS_PK_C is not set
# CONFIG_MBEDTLS_PEM_PARSE_C is not set
# CONFIG_MBEDTLS_PEM_WRITE_C is not set
# end of Legacy mbed TLS crypto APIs
# end of nRF Security

#
# Audio Modules
#
# CONFIG_AUDIO_MODULE_TEST is not set

#
# Log levels
#
# end of Log levels
# end of Audio Modules

#
# Audio Modules
#
# CONFIG_AUDIO_MODULE_TEMPLATE is not set
# end of Audio Modules

# CONFIG_TRUSTED_STORAGE is not set

#
# Logging over RPC
#
# end of Logging over RPC

# CONFIG_SUIT is not set
# CONFIG_NRF_COMPRESS is not set

#
# MCUboot IDs (informative only, do not change)
#
CONFIG_MCUBOOT_APPLICATION_IMAGE_NUMBER=0
CONFIG_MCUBOOT_NETWORK_CORE_IMAGE_NUMBER=-1
CONFIG_MCUBOOT_WIFI_PATCHES_IMAGE_NUMBER=-1
CONFIG_MCUBOOT_QSPI_XIP_IMAGE_NUMBER=-1
CONFIG_MCUBOOT_MCUBOOT_IMAGE_NUMBER=-1
CONFIG_MCUBOOT_MCUBOOT_S0_S1_VERSION_MAJOR=-1
CONFIG_MCUBOOT_MCUBOOT_S0_S1_VERSION_MINOR=-1
CONFIG_MCUBOOT_MCUBOOT_S0_S1_VERSION_REVISION=-1
CONFIG_MCUBOOT_MCUBOOT_S0_S1_VERSION_BUILD_NUMBER=-1
# end of MCUboot IDs (informative only, do not change)
# end of Subsystems

# CONFIG_WFA_QT_CONTROL_APP is not set
CONFIG_WFA_QT_THREAD_STACK_SIZE=5200
CONFIG_WFA_QT_REBOOT_TIMEOUT_MS=1000
CONFIG_WFA_QT_DEFAULT_INTERFACE="wlan0"
CONFIG_WPAS_READY_TIMEOUT_MS=10000

#
# Libraries
#
# CONFIG_APP_JWT is not set

#
# Binary libraries
#
# end of Binary libraries

# CONFIG_AT_MONITOR is not set
# CONFIG_LTE_LINK_CONTROL is not set
CONFIG_FPROTECT_BLOCK_SIZE=0x1000
CONFIG_FPROTECT=y
# CONFIG_FPROTECT_APP is not set
CONFIG_FPROTECT_ALLOW_COMBINED_REGIONS=y
# CONFIG_AT_CMD_CUSTOM is not set
# CONFIG_DK_LIBRARY is not set
# CONFIG_AT_PARSER is not set
# CONFIG_RESET_ON_FATAL_ERROR is not set
# CONFIG_SMS is not set
# CONFIG_DATE_TIME is not set
# CONFIG_HW_ID_LIBRARY is not set
# CONFIG_RAM_POWER_DOWN_LIBRARY is not set
# CONFIG_WAVE_GEN_LIB is not set
CONFIG_HW_UNIQUE_KEY_SUPPORTED=y
# CONFIG_HW_UNIQUE_KEY is not set
CONFIG_HW_UNIQUE_KEY_PARTITION_SIZE=0
# CONFIG_LOCATION is not set
# CONFIG_QOS is not set
# CONFIG_SFLOAT is not set
# CONFIG_CONTIN_ARRAY is not set
# CONFIG_PCM_MIX is not set
# CONFIG_TONE is not set
# CONFIG_PSCM is not set
# CONFIG_DATA_FIFO is not set
# CONFIG_FEM_AL_LIB is not set
# CONFIG_SAMPLE_RATE_CONVERTER is not set
CONFIG_NCS_BOOT_BANNER=y
CONFIG_NCS_APPLICATION_BOOT_BANNER_STRING="MCUboot"
CONFIG_NCS_NCS_BOOT_BANNER_STRING="nRF Connect SDK"
CONFIG_NCS_ZEPHYR_BOOT_BANNER_STRING="Zephyr OS"
# end of Libraries

#
# Device Drivers
#
# CONFIG_BT_DRIVER_QUIRK_NO_AUTO_DLE is not set
# CONFIG_FLASH_RPC is not set
# CONFIG_SOC_FLASH_NRF_RADIO_SYNC_RPC is not set
CONFIG_SOC_FLASH_NRF_RADIO_SYNC_MPSL_TIMESLOT_SESSION_COUNT=0
# CONFIG_ETH_RTT is not set
# CONFIG_SENSOR is not set
# CONFIG_NRF_SW_LPUART is not set
CONFIG_NRFX_GPIOTE_NUM_OF_EVT_HANDLERS=1
# end of Device Drivers

#
# External libraries
#
# end of External libraries

#
# Test
#
# CONFIG_UNITY is not set

#
# Mocks
#
# CONFIG_MOCK_NRF_MODEM_AT is not set
# CONFIG_MOCK_NRF_RPC is not set
# end of Mocks
# end of Test
# end of Nordic nRF Connect

CONFIG_ZEPHYR_NRF_MODULE=y
# end of nrf (C:/ncs/v3.0.2/nrf)

#
# hostap (C:/ncs/v3.0.2/modules/lib/hostap)
#
# CONFIG_WIFI_NM_WPA_SUPPLICANT is not set
CONFIG_ZEPHYR_HOSTAP_MODULE=y
# end of hostap (C:/ncs/v3.0.2/modules/lib/hostap)

#
# mcuboot (C:/ncs/v3.0.2/bootloader/mcuboot)
#

#
# MCUboot
#
CONFIG_DT_FLASH_WRITE_BLOCK_SIZE=16
# CONFIG_USE_NRF53_MULTI_IMAGE_WITHOUT_UPGRADE_ONLY is not set
# end of MCUboot

CONFIG_ZEPHYR_MCUBOOT_MODULE=y
# end of mcuboot (C:/ncs/v3.0.2/bootloader/mcuboot)

#
# mbedtls (C:/ncs/v3.0.2/modules/crypto/mbedtls)
#
CONFIG_ZEPHYR_MBEDTLS_MODULE=y
CONFIG_PSA_CRYPTO_CLIENT=y
# CONFIG_PSA_CRYPTO_ENABLE_ALL is not set
CONFIG_PSA_WANT_ALG_SHA_256=y
CONFIG_PSA_WANT_ALG_SHA_512=y
CONFIG_PSA_WANT_ECC_MONTGOMERY_255=y
CONFIG_PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY=y
CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT=y
CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC=y
# end of mbedtls (C:/ncs/v3.0.2/modules/crypto/mbedtls)

#
# oberon-psa-crypto (C:/ncs/v3.0.2/modules/crypto/oberon-psa-crypto)
#
CONFIG_ZEPHYR_OBERON_PSA_CRYPTO_MODULE=y
# end of oberon-psa-crypto (C:/ncs/v3.0.2/modules/crypto/oberon-psa-crypto)

#
# trusted-firmware-m (C:/ncs/v3.0.2/modules/tee/tf-m/trusted-firmware-m)
#
CONFIG_ZEPHYR_TRUSTED_FIRMWARE_M_MODULE=y
# end of trusted-firmware-m (C:/ncs/v3.0.2/modules/tee/tf-m/trusted-firmware-m)

CONFIG_ZEPHYR_PSA_ARCH_TESTS_MODULE=y

#
# cjson (C:/ncs/v3.0.2/modules/lib/cjson)
#
CONFIG_ZEPHYR_CJSON_MODULE=y
# end of cjson (C:/ncs/v3.0.2/modules/lib/cjson)

#
# azure-sdk-for-c (C:/ncs/v3.0.2/modules/lib/azure-sdk-for-c)
#
# CONFIG_AZURE_SDK is not set
CONFIG_ZEPHYR_AZURE_SDK_FOR_C_MODULE=y
# end of azure-sdk-for-c (C:/ncs/v3.0.2/modules/lib/azure-sdk-for-c)

#
# cirrus-logic (C:/ncs/v3.0.2/modules/hal/cirrus-logic)
#
# CONFIG_HW_CODEC_CIRRUS_LOGIC is not set
CONFIG_ZEPHYR_CIRRUS_LOGIC_MODULE=y
# end of cirrus-logic (C:/ncs/v3.0.2/modules/hal/cirrus-logic)

#
# openthread (C:/ncs/v3.0.2/modules/lib/openthread)
#
# CONFIG_OPENTHREAD is not set
CONFIG_ZEPHYR_OPENTHREAD_MODULE=y
# end of openthread (C:/ncs/v3.0.2/modules/lib/openthread)

#
# suit-generator (C:/ncs/v3.0.2/modules/lib/suit-generator)
#
CONFIG_SUIT_ENVELOPE_TEMPLATE_FILENAME=""
CONFIG_SUIT_ENVELOPE_TARGET=""
CONFIG_SUIT_ENVELOPE_OUTPUT_ARTIFACT="merged.hex"
# CONFIG_SUIT_RECOVERY is not set
# CONFIG_SUIT_LOCAL_ENVELOPE_GENERATE is not set
# CONFIG_SUIT_DFU_CACHE_EXTRACT_IMAGE is not set
# CONFIG_SUIT_ENVELOPE_TARGET_ENCRYPT is not set
# CONFIG_SUIT_ENVELOPE_TARGET_SIGN is not set
CONFIG_ZEPHYR_SUIT_GENERATOR_MODULE=y
# end of suit-generator (C:/ncs/v3.0.2/modules/lib/suit-generator)

#
# suit-processor (C:/ncs/v3.0.2/modules/lib/suit-processor)
#
# CONFIG_SUIT_PROCESSOR is not set
CONFIG_SUIT_PLATFORM_DRY_RUN_SUPPORT=y
CONFIG_ZEPHYR_SUIT_PROCESSOR_MODULE=y
# end of suit-processor (C:/ncs/v3.0.2/modules/lib/suit-processor)

#
# memfault-firmware-sdk (C:/ncs/v3.0.2/modules/lib/memfault-firmware-sdk)
#
# CONFIG_MEMFAULT is not set
CONFIG_ZEPHYR_MEMFAULT_FIRMWARE_SDK_MODULE=y
# end of memfault-firmware-sdk (C:/ncs/v3.0.2/modules/lib/memfault-firmware-sdk)

#
# coremark (C:/ncs/v3.0.2/modules/benchmark/coremark)
#
# CONFIG_COREMARK is not set
CONFIG_ZEPHYR_COREMARK_MODULE=y
# end of coremark (C:/ncs/v3.0.2/modules/benchmark/coremark)

#
# canopennode (C:/ncs/v3.0.2/modules/lib/canopennode)
#
CONFIG_ZEPHYR_CANOPENNODE_MODULE=y
# end of canopennode (C:/ncs/v3.0.2/modules/lib/canopennode)

#
# chre (C:/ncs/v3.0.2/modules/lib/chre)
#
CONFIG_ZEPHYR_CHRE_MODULE=y
# CONFIG_CHRE is not set
# end of chre (C:/ncs/v3.0.2/modules/lib/chre)

#
# lz4 (C:/ncs/v3.0.2/modules/lib/lz4)
#
CONFIG_ZEPHYR_LZ4_MODULE=y
# CONFIG_LZ4 is not set
# end of lz4 (C:/ncs/v3.0.2/modules/lib/lz4)

#
# nanopb (C:/ncs/v3.0.2/modules/lib/nanopb)
#
CONFIG_ZEPHYR_NANOPB_MODULE=y
# CONFIG_NANOPB is not set
# end of nanopb (C:/ncs/v3.0.2/modules/lib/nanopb)

CONFIG_ZEPHYR_TF_M_TESTS_MODULE=y

#
# zscilib (C:/ncs/v3.0.2/modules/lib/zscilib)
#
# CONFIG_ZSL is not set
CONFIG_ZEPHYR_ZSCILIB_MODULE=y
# end of zscilib (C:/ncs/v3.0.2/modules/lib/zscilib)

#
# cmsis (C:/ncs/v3.0.2/modules/hal/cmsis)
#
CONFIG_ZEPHYR_CMSIS_MODULE=y
CONFIG_HAS_CMSIS_CORE=y
CONFIG_HAS_CMSIS_CORE_M=y
# CONFIG_CMSIS_M_CHECK_DEVICE_DEFINES is not set
# end of cmsis (C:/ncs/v3.0.2/modules/hal/cmsis)

#
# cmsis-dsp (C:/ncs/v3.0.2/modules/lib/cmsis-dsp)
#
CONFIG_ZEPHYR_CMSIS_DSP_MODULE=y
# CONFIG_CMSIS_DSP is not set
# end of cmsis-dsp (C:/ncs/v3.0.2/modules/lib/cmsis-dsp)

#
# cmsis-nn (C:/ncs/v3.0.2/modules/lib/cmsis-nn)
#
CONFIG_ZEPHYR_CMSIS_NN_MODULE=y
# CONFIG_CMSIS_NN is not set
# end of cmsis-nn (C:/ncs/v3.0.2/modules/lib/cmsis-nn)

#
# fatfs (C:/ncs/v3.0.2/modules/fs/fatfs)
#
CONFIG_ZEPHYR_FATFS_MODULE=y
# end of fatfs (C:/ncs/v3.0.2/modules/fs/fatfs)

#
# hal_nordic (C:/ncs/v3.0.2/modules/hal/nordic)
#
CONFIG_ZEPHYR_HAL_NORDIC_MODULE=y
CONFIG_HAS_NORDIC_DRIVERS=y

#
# Nordic drivers
#
# CONFIG_NRF_802154_SOURCE_HAL_NORDIC is not set
# CONFIG_NRF_802154_RADIO_DRIVER is not set
# CONFIG_NRF_802154_SER_RADIO is not set
# end of Nordic drivers

CONFIG_HAS_NRFX=y

#
# nrfx drivers
#
CONFIG_NRFX_CLOCK=y
CONFIG_NRFX_CLOCK_LFXO_TWO_STAGE_ENABLED=y
# CONFIG_NRFX_COMP is not set
# CONFIG_NRFX_DPPI00 is not set
# CONFIG_NRFX_DPPI10 is not set
# CONFIG_NRFX_DPPI20 is not set
# CONFIG_NRFX_DPPI30 is not set
# CONFIG_NRFX_EGU10 is not set
# CONFIG_NRFX_EGU20 is not set
CONFIG_NRFX_GPIOTE=y
CONFIG_NRFX_GPIOTE20=y
CONFIG_NRFX_GPIOTE30=y
# CONFIG_NRFX_GPPI is not set
CONFIG_NRFX_GRTC=y
# CONFIG_NRFX_I2S20 is not set
# CONFIG_NRFX_LPCOMP is not set
# CONFIG_NRFX_NFCT is not set
# CONFIG_NRFX_PDM20 is not set
# CONFIG_NRFX_PDM21 is not set
# CONFIG_NRFX_POWER is not set
# CONFIG_NRFX_PPIB00 is not set
# CONFIG_NRFX_PPIB01 is not set
# CONFIG_NRFX_PPIB10 is not set
# CONFIG_NRFX_PPIB11 is not set
# CONFIG_NRFX_PPIB20 is not set
# CONFIG_NRFX_PPIB21 is not set
# CONFIG_NRFX_PPIB22 is not set
# CONFIG_NRFX_PPIB30 is not set
# CONFIG_NRFX_PWM20 is not set
# CONFIG_NRFX_PWM21 is not set
# CONFIG_NRFX_PWM22 is not set
# CONFIG_NRFX_QDEC20 is not set
# CONFIG_NRFX_QDEC21 is not set
CONFIG_NRFX_RRAMC=y
# CONFIG_NRFX_SAADC is not set
# CONFIG_NRFX_SPIM00 is not set
# CONFIG_NRFX_SPIM20 is not set
# CONFIG_NRFX_SPIM21 is not set
# CONFIG_NRFX_SPIM22 is not set
# CONFIG_NRFX_SPIM30 is not set
# CONFIG_NRFX_SPIS00 is not set
# CONFIG_NRFX_SPIS20 is not set
# CONFIG_NRFX_SPIS21 is not set
# CONFIG_NRFX_SPIS22 is not set
# CONFIG_NRFX_SPIS30 is not set
# CONFIG_NRFX_SYSTICK is not set
# CONFIG_NRFX_TEMP is not set
# CONFIG_NRFX_TIMER00 is not set
# CONFIG_NRFX_TIMER10 is not set
# CONFIG_NRFX_TIMER20 is not set
# CONFIG_NRFX_TIMER21 is not set
# CONFIG_NRFX_TIMER22 is not set
# CONFIG_NRFX_TIMER23 is not set
# CONFIG_NRFX_TIMER24 is not set
# CONFIG_NRFX_TWIM20 is not set
# CONFIG_NRFX_TWIM21 is not set
# CONFIG_NRFX_TWIM22 is not set
# CONFIG_NRFX_TWIM30 is not set
# CONFIG_NRFX_TWIS20 is not set
# CONFIG_NRFX_TWIS21 is not set
# CONFIG_NRFX_TWIS22 is not set
# CONFIG_NRFX_TWIS30 is not set
# CONFIG_NRFX_UARTE00 is not set
# CONFIG_NRFX_UARTE20 is not set
# CONFIG_NRFX_UARTE21 is not set
# CONFIG_NRFX_UARTE22 is not set
# CONFIG_NRFX_UARTE30 is not set
CONFIG_NRFX_WDT=y
CONFIG_NRFX_WDT30=y
CONFIG_NRFX_WDT31=y

#
# Peripheral Resource Sharing module
#
# CONFIG_NRFX_PRS_BOX_0 is not set
# CONFIG_NRFX_PRS_BOX_1 is not set
# CONFIG_NRFX_PRS_BOX_2 is not set
# CONFIG_NRFX_PRS_BOX_3 is not set
# CONFIG_NRFX_PRS_BOX_4 is not set
# end of Peripheral Resource Sharing module

CONFIG_NRFX_RESERVED_RESOURCES_HEADER="nrfx_config_reserved_resources_ncs.h"
# end of nrfx drivers
# end of hal_nordic (C:/ncs/v3.0.2/modules/hal/nordic)

#
# hal_st (C:/ncs/v3.0.2/modules/hal/st)
#
CONFIG_ZEPHYR_HAL_ST_MODULE=y
# end of hal_st (C:/ncs/v3.0.2/modules/hal/st)

#
# hal_tdk (C:/ncs/v3.0.2/modules/hal/tdk)
#
CONFIG_ZEPHYR_HAL_TDK_MODULE=y

#
# TDK drivers
#
# CONFIG_TDK_HAL is not set
# end of TDK drivers
# end of hal_tdk (C:/ncs/v3.0.2/modules/hal/tdk)

CONFIG_ZEPHYR_HAL_WURTHELEKTRONIK_MODULE=y

#
# liblc3 (C:/ncs/v3.0.2/modules/lib/liblc3)
#
CONFIG_ZEPHYR_LIBLC3_MODULE=y
# end of liblc3 (C:/ncs/v3.0.2/modules/lib/liblc3)

CONFIG_ZEPHYR_LIBMETAL_MODULE=y

#
# littlefs (C:/ncs/v3.0.2/modules/fs/littlefs)
#
CONFIG_ZEPHYR_LITTLEFS_MODULE=y
# end of littlefs (C:/ncs/v3.0.2/modules/fs/littlefs)

#
# loramac-node (C:/ncs/v3.0.2/modules/lib/loramac-node)
#
CONFIG_ZEPHYR_LORAMAC_NODE_MODULE=y
# CONFIG_HAS_SEMTECH_RADIO_DRIVERS is not set
# end of loramac-node (C:/ncs/v3.0.2/modules/lib/loramac-node)

#
# lvgl (C:/ncs/v3.0.2/modules/lib/gui/lvgl)
#
CONFIG_ZEPHYR_LVGL_MODULE=y
# end of lvgl (C:/ncs/v3.0.2/modules/lib/gui/lvgl)

CONFIG_ZEPHYR_MIPI_SYS_T_MODULE=y

#
# nrf_wifi (C:/ncs/v3.0.2/modules/lib/nrf_wifi)
#
CONFIG_ZEPHYR_NRF_WIFI_MODULE=y
# CONFIG_NRF70_BUSLIB is not set
# end of nrf_wifi (C:/ncs/v3.0.2/modules/lib/nrf_wifi)

CONFIG_ZEPHYR_OPEN_AMP_MODULE=y

#
# percepio (C:/ncs/v3.0.2/modules/debug/percepio)
#

#
# Percepio Tracealyzer support can be enabled from the tracing subsystem
#
# CONFIG_PERCEPIO_DFM is not set
CONFIG_ZEPHYR_PERCEPIO_MODULE=y
# end of percepio (C:/ncs/v3.0.2/modules/debug/percepio)

#
# picolibc (C:/ncs/v3.0.2/modules/lib/picolibc)
#
# CONFIG_PICOLIBC_MODULE is not set
CONFIG_ZEPHYR_PICOLIBC_MODULE=y
# end of picolibc (C:/ncs/v3.0.2/modules/lib/picolibc)

#
# segger (C:/ncs/v3.0.2/modules/debug/segger)
#
CONFIG_ZEPHYR_SEGGER_MODULE=y
CONFIG_HAS_SEGGER_RTT=y
# CONFIG_USE_SEGGER_RTT is not set
# end of segger (C:/ncs/v3.0.2/modules/debug/segger)

CONFIG_ZEPHYR_TINYCRYPT_MODULE=y

#
# uoscore-uedhoc (C:/ncs/v3.0.2/modules/lib/uoscore-uedhoc)
#
CONFIG_ZEPHYR_UOSCORE_UEDHOC_MODULE=y
# end of uoscore-uedhoc (C:/ncs/v3.0.2/modules/lib/uoscore-uedhoc)

#
# zcbor (C:/ncs/v3.0.2/modules/lib/zcbor)
#
CONFIG_ZEPHYR_ZCBOR_MODULE=y
# CONFIG_ZCBOR is not set
# end of zcbor (C:/ncs/v3.0.2/modules/lib/zcbor)

#
# nrfxlib (C:/ncs/v3.0.2/nrfxlib)
#

#
# Nordic nrfxlib
#

#
# nrf_modem (Modem library)
#
CONFIG_NRF_MODEM_SHMEM_CTRL_SIZE=0x4e8
# end of nrf_modem (Modem library)

# CONFIG_NFC_T2T_NRFXLIB is not set
# CONFIG_NFC_T4T_NRFXLIB is not set
# CONFIG_MPSL is not set

#
# Crypto libraries for nRF5x SOCs.
#
# CONFIG_NRF_OBERON is not set
# end of Crypto libraries for nRF5x SOCs.

# CONFIG_NRF_RPC is not set
CONFIG_NRF_802154_SOURCE_NRFXLIB=y
# CONFIG_NRF_DM is not set
# CONFIG_NRF_FUEL_GAUGE is not set
# end of Nordic nrfxlib

CONFIG_ZEPHYR_NRFXLIB_MODULE=y
# end of nrfxlib (C:/ncs/v3.0.2/nrfxlib)

CONFIG_ZEPHYR_NRF_HW_MODELS_MODULE=y

#
# connectedhomeip (C:/ncs/v3.0.2/modules/lib/matter)
#
# CONFIG_CHIP is not set
CONFIG_ZEPHYR_CONNECTEDHOMEIP_MODULE=y
# end of connectedhomeip (C:/ncs/v3.0.2/modules/lib/matter)

# CONFIG_LIBMETAL is not set
# CONFIG_LVGL is not set
# CONFIG_HAS_MEC_HAL is not set
# CONFIG_HAS_MPFS_HAL is not set
# CONFIG_HAS_MEC5_HAL is not set
# CONFIG_OPENAMP is not set
# CONFIG_MIPI_SYST_LIB is not set
# CONFIG_HAS_TELINK_DRIVERS is not set
# CONFIG_TINYCRYPT is not set
CONFIG_MCUBOOT_BOOTUTIL_LIB=y

#
# Unavailable modules, please install those via the project manifest.
#

#
# hal_gigadevice module not available.
#

#
# Trusted-firmware-a module not available.
#

#
# THRIFT module not available.
#
# CONFIG_ACPI is not set
# end of Modules

CONFIG_BOARD="vertex_nrf54l15"
CONFIG_BOARD_REVISION=""
CONFIG_BOARD_TARGET="vertex_nrf54l15/nrf54l15/cpuapp"
# CONFIG_NET_DRIVERS is not set
CONFIG_BOARD_VERTEX_NRF54L15=y
CONFIG_BOARD_VERTEX_NRF54L15_NRF54L15_CPUAPP=y
CONFIG_BOARD_QUALIFIERS="nrf54l15/cpuapp"

#
# Board Options
#
# end of Board Options

#
# Hardware Configuration
#
CONFIG_SOC="nrf54l15"
CONFIG_SOC_SERIES="nrf54l"
CONFIG_SOC_FAMILY="nordic_nrf"
CONFIG_SOC_FAMILY_NORDIC_NRF=y
CONFIG_SOC_SERIES_NRF54LX=y
CONFIG_SOC_NRF54L15=y
CONFIG_SOC_NRF54L15_CPUAPP=y
# CONFIG_BUILD_OUTPUT_INFO_HEADER is not set
CONFIG_HAS_HW_NRF_CLOCK=y
CONFIG_HAS_HW_NRF_DPPIC=y
CONFIG_HAS_HW_NRF_GPIO0=y
CONFIG_HAS_HW_NRF_GPIO1=y
CONFIG_HAS_HW_NRF_GPIO2=y
CONFIG_HAS_HW_NRF_GPIOTE20=y
CONFIG_HAS_HW_NRF_GPIOTE30=y
CONFIG_HAS_HW_NRF_GRTC=y
CONFIG_HAS_HW_NRF_RADIO_BLE_2M=y
CONFIG_HAS_HW_NRF_RADIO_BLE_CODED=y
CONFIG_HAS_HW_NRF_RADIO_CS=y
CONFIG_HAS_HW_NRF_RADIO_DFE=y
CONFIG_HAS_HW_NRF_RADIO_IEEE802154=y
CONFIG_HAS_HW_NRF_SAADC=y
CONFIG_HAS_HW_NRF_SPIM00=y
CONFIG_HAS_HW_NRF_TEMP=y
CONFIG_HAS_HW_NRF_TWIM30=y
CONFIG_HAS_NORDIC_RAM_CTRL=y
# CONFIG_NRF_FORCE_RAM_ON_REBOOT is not set
# CONFIG_NRF_SYS_EVENT is not set
# CONFIG_SOC_NRF54H20_GPD is not set
CONFIG_SOC_NRF54L_CPUAPP_COMMON=y
# CONFIG_SOC_NRF54LX_DISABLE_FICR_TRIMCNF is not set
# CONFIG_SOC_NRF54LX_SKIP_GLITCHDETECTOR_DISABLE is not set
# CONFIG_SOC_NRF_FORCE_CONSTLAT is not set
CONFIG_NRF_SOC_SECURE_SUPPORTED=y
# CONFIG_NFCT_PINS_AS_GPIOS is not set
CONFIG_NRF_APPROTECT_DISABLE=y
# CONFIG_NRF_APPROTECT_LOCK is not set
# CONFIG_NRF_APPROTECT_USER_HANDLING is not set
CONFIG_NRF_SECURE_APPROTECT_DISABLE=y
# CONFIG_NRF_SECURE_APPROTECT_LOCK is not set
# CONFIG_NRF_SECURE_APPROTECT_USER_HANDLING is not set
# CONFIG_NRF_TRACE_PORT is not set
CONFIG_DEPRECATED_UART_NRFX_UARTE_LEGACY_SHIM=y
CONFIG_GPIO_INIT_PRIORITY=40
# end of Hardware Configuration

CONFIG_SOC_COMPATIBLE_NRF=y
CONFIG_SOC_COMPATIBLE_NRF54LX=y
CONFIG_ARCH="arm"
# CONFIG_EXTRA_EXCEPTION_INFO is not set
CONFIG_ARCH_HAS_SINGLE_THREAD_SUPPORT=y
CONFIG_CPU_CORTEX=y
CONFIG_KOBJECT_TEXT_AREA=256
CONFIG_ARM_MPU=y
CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE=32
CONFIG_MPU_ALLOW_FLASH_WRITE=y

#
# ARM Options
#
CONFIG_CPU_CORTEX_M=y
# CONFIG_ARM_ZIMAGE_HEADER is not set
CONFIG_ISA_THUMB2=y
CONFIG_ASSEMBLER_ISA_THUMB2=y
CONFIG_COMPILER_ISA_THUMB2=y
CONFIG_STACK_ALIGN_DOUBLE_WORD=y
# CONFIG_RUNTIME_NMI is not set
# CONFIG_PLATFORM_SPECIFIC_INIT is not set
CONFIG_FAULT_DUMP=2
CONFIG_BUILTIN_STACK_GUARD=y
CONFIG_ARM_STACK_PROTECTION=y
CONFIG_FP16=y
CONFIG_FP16_IEEE=y
# CONFIG_FP16_ALT is not set
CONFIG_CPU_CORTEX_M33=y
CONFIG_CPU_CORTEX_M_HAS_SYSTICK=y
CONFIG_CPU_CORTEX_M_HAS_BASEPRI=y
CONFIG_CPU_CORTEX_M_HAS_VTOR=y
CONFIG_CPU_CORTEX_M_HAS_SPLIM=y
CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS=y
CONFIG_CPU_CORTEX_M_HAS_CMSE=y
CONFIG_ARMV7_M_ARMV8_M_MAINLINE=y
CONFIG_ARMV8_M_MAINLINE=y
CONFIG_ARMV8_M_SE=y
CONFIG_ARMV7_M_ARMV8_M_FP=y
CONFIG_ARMV8_M_DSP=y

#
# ARM Cortex-M0/M0+/M1/M3/M4/M7/M23/M33/M55 options
#
# CONFIG_ZERO_LATENCY_IRQS is not set
# CONFIG_SW_VECTOR_RELAY is not set
# CONFIG_CORTEX_M_DEBUG_MONITOR_HOOK is not set
# CONFIG_TRAP_UNALIGNED_ACCESS is not set
# end of ARM Cortex-M0/M0+/M1/M3/M4/M7/M23/M33/M55 options

CONFIG_NULL_POINTER_EXCEPTION_DETECTION_NONE=y
# CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU is not set
# CONFIG_ARM_TRUSTZONE_M is not set
# CONFIG_MPU_STACK_GUARD is not set
# CONFIG_MPU_DISABLE_BACKGROUND_MAP is not set
# CONFIG_CUSTOM_SECTION_ALIGN is not set
CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE=32
CONFIG_CPU_HAS_ARM_SAU=y
# end of ARM Options

CONFIG_ARM=y
CONFIG_ARCH_IS_SET=y

#
# General Architecture Options
#
# CONFIG_SEMIHOST is not set
CONFIG_LITTLE_ENDIAN=y
# CONFIG_USERSPACE is not set
CONFIG_KOBJECT_DATA_AREA_RESERVE_EXTRA_PERCENT=100
CONFIG_KOBJECT_RODATA_AREA_EXTRA_BYTES=16
CONFIG_GEN_PRIV_STACKS=y
# CONFIG_STACK_GROWS_UP is not set
# CONFIG_FRAME_POINTER is not set

#
# Interrupt Configuration
#
CONFIG_ISR_TABLES_LOCAL_DECLARATION_SUPPORTED=y
# CONFIG_ISR_TABLES_LOCAL_DECLARATION is not set
CONFIG_IRQ_VECTOR_TABLE_JUMP_BY_ADDRESS=y
# CONFIG_IRQ_VECTOR_TABLE_JUMP_BY_CODE is not set
CONFIG_EXCEPTION_DEBUG=y
# CONFIG_SIMPLIFIED_EXCEPTION_CODES is not set
# end of Interrupt Configuration
# end of General Architecture Options

CONFIG_ARCH_HAS_STACK_PROTECTION=y
CONFIG_ARCH_HAS_USERSPACE=y
CONFIG_ARCH_HAS_EXECUTABLE_PAGE_BIT=y
CONFIG_ARCH_HAS_RAMFUNC_SUPPORT=y
CONFIG_ARCH_HAS_NESTED_EXCEPTION_DETECTION=y
CONFIG_ARCH_SUPPORTS_COREDUMP=y
CONFIG_ARCH_SUPPORTS_COREDUMP_THREADS=y
CONFIG_ARCH_SUPPORTS_ARCH_HW_INIT=y
CONFIG_ARCH_SUPPORTS_ROM_START=y
CONFIG_ARCH_HAS_EXTRA_EXCEPTION_INFO=y
CONFIG_ARCH_HAS_THREAD_LOCAL_STORAGE=y
CONFIG_ARCH_HAS_SUSPEND_TO_RAM=y
CONFIG_ARCH_HAS_THREAD_ABORT=y
CONFIG_ARCH_HAS_CODE_DATA_RELOCATION=y
CONFIG_CPU_HAS_TEE=y
CONFIG_CPU_HAS_FPU=y
CONFIG_CPU_HAS_MPU=y
CONFIG_CPU_HAS_ICACHE=y
CONFIG_MPU=y
CONFIG_MPU_REQUIRES_NON_OVERLAPPING_REGIONS=y
CONFIG_MPU_GAP_FILLING=y
CONFIG_SRAM_REGION_PERMISSIONS=y

#
# DSP Options
#
# end of DSP Options

#
# Floating Point Options
#
# end of Floating Point Options

#
# Cache Options
#
CONFIG_ICACHE=y
# CONFIG_ICACHE_LINE_SIZE_DETECT is not set
# CONFIG_ARCH_CACHE is not set
CONFIG_EXTERNAL_CACHE=y
# end of Cache Options

CONFIG_TOOLCHAIN_HAS_BUILTIN_FFS=y
CONFIG_ARCH_HAS_CUSTOM_SWAP_TO_MAIN=y

#
# General Kernel Options
#
CONFIG_NUM_COOP_PRIORITIES=1
CONFIG_NUM_PREEMPT_PRIORITIES=0
CONFIG_MAIN_THREAD_PRIORITY=-2
CONFIG_COOP_ENABLED=y
CONFIG_PRIORITY_CEILING=-127
# CONFIG_SCHED_DEADLINE is not set
CONFIG_THREAD_STACK_INFO=y
# CONFIG_THREAD_CUSTOM_DATA is not set
# CONFIG_DYNAMIC_THREAD is not set
# CONFIG_SCHED_DUMB is not set
CONFIG_SCHED_SIMPLE=y
# CONFIG_SCHED_SCALABLE is not set
# CONFIG_SCHED_MULTIQ is not set
# CONFIG_WAITQ_DUMB is not set
# CONFIG_WAITQ_SCALABLE is not set
CONFIG_WAITQ_SIMPLE=y

#
# Misc Kernel related options
#
CONFIG_ERRNO=y
# end of Misc Kernel related options

#
# Kernel Debugging and Metrics
#
# CONFIG_BOOT_CLEAR_SCREEN is not set
# CONFIG_THREAD_MONITOR is not set
# CONFIG_THREAD_NAME is not set
# CONFIG_THREAD_RUNTIME_STATS is not set
# end of Kernel Debugging and Metrics

# CONFIG_OBJ_CORE is not set

#
# System Work Queue Options
#
# CONFIG_SYSTEM_WORKQUEUE_NO_YIELD is not set
# end of System Work Queue Options

#
# Barrier Operations
#
CONFIG_BARRIER_OPERATIONS_ARCH=y
# end of Barrier Operations

#
# Atomic Operations
#
CONFIG_ATOMIC_OPERATIONS_BUILTIN=y
# end of Atomic Operations

#
# Timer API Options
#
# end of Timer API Options

#
# Other Kernel Object Options
#
# CONFIG_POLL is not set
# CONFIG_MEM_SLAB_POINTER_VALIDATE is not set
# CONFIG_MEM_SLAB_TRACE_MAX_UTILIZATION is not set
CONFIG_NUM_MBOX_ASYNC_MSGS=10
# CONFIG_EVENTS is not set
# CONFIG_PIPES is not set
CONFIG_KERNEL_MEM_POOL=y
# CONFIG_HEAP_MEM_POOL_IGNORE_MIN is not set
# end of Other Kernel Object Options

CONFIG_SWAP_NONATOMIC=y
CONFIG_TIMEOUT_64BIT=y
CONFIG_SYS_CLOCK_MAX_TIMEOUT_DAYS=365

#
# Security Options
#
# end of Security Options

#
# Memory Domains
#
CONFIG_ARCH_MEM_DOMAIN_SUPPORTS_ISOLATED_STACKS=y
CONFIG_MEM_DOMAIN_ISOLATED_STACKS=y
# end of Memory Domains

#
# SMP Options
#
# CONFIG_TICKET_SPINLOCKS is not set
# end of SMP Options

CONFIG_TOOLCHAIN_SUPPORTS_THREAD_LOCAL_STORAGE=y
# CONFIG_THREAD_LOCAL_STORAGE is not set
CONFIG_TOOLCHAIN_SUPPORTS_STATIC_INIT_GNU=y
# CONFIG_STATIC_INIT_GNU is not set
# CONFIG_BOOTARGS is not set
# end of General Kernel Options

#
# Device Options
#
# CONFIG_DEVICE_DEPS is not set
# CONFIG_DEVICE_MUTABLE is not set
# CONFIG_DEVICE_DT_METADATA is not set
# end of Device Options

#
# Initialization Priorities
#
CONFIG_KERNEL_INIT_PRIORITY_OBJECTS=30
CONFIG_KERNEL_INIT_PRIORITY_LIBC=35
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT=40
CONFIG_KERNEL_INIT_PRIORITY_DEVICE=50
CONFIG_APPLICATION_INIT_PRIORITY=90
# end of Initialization Priorities

#
# Virtual Memory Support
#
# end of Virtual Memory Support

#
# SoC and Board Hooks
#
# CONFIG_SOC_PREP_HOOK is not set
# CONFIG_SOC_EARLY_INIT_HOOK is not set
# CONFIG_SOC_LATE_INIT_HOOK is not set
# CONFIG_SOC_PER_CORE_INIT_HOOK is not set
# CONFIG_BOARD_EARLY_INIT_HOOK is not set
# CONFIG_BOARD_LATE_INIT_HOOK is not set
# end of SoC and Board Hooks

#
# Device Drivers
#
# CONFIG_ADC is not set
# CONFIG_AUDIO is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_BBRAM is not set
CONFIG_FLASH=y
CONFIG_CACHE_HAS_DRIVER=y

#
# Device Drivers
#
# CONFIG_CACHE_NRF_PATCH_LINEADDR is not set
# CONFIG_CAN is not set
# CONFIG_CHARGER is not set
CONFIG_CLOCK_CONTROL_NRF=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC is not set
CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_SYNTH is not set
# CONFIG_CLOCK_CONTROL_NRF_HFINT_CALIBRATION is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_250PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_100PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_75PPM is not set
CONFIG_CLOCK_CONTROL_NRF_K32SRC_50PPM=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_20PPM is not set
CONFIG_CLOCK_CONTROL_NRF_ACCURACY=50
# CONFIG_CLOCK_CONTROL_FIXED_RATE_CLOCK is not set
# CONFIG_CLOCK_CONTROL_RTS5912_SCCON is not set
# CONFIG_COMPARATOR is not set
# CONFIG_COREDUMP_DEVICE is not set
# CONFIG_CRYPTO is not set
# CONFIG_DAC is not set
# CONFIG_DAI is not set
# CONFIG_DISK_DRIVERS is not set
# CONFIG_DISPLAY is not set
# CONFIG_DMA is not set
# CONFIG_DP_DRIVER is not set
# CONFIG_EDAC is not set
# CONFIG_EEPROM is not set
# CONFIG_ENTROPY_GENERATOR is not set
# CONFIG_ESPI is not set

#
# Firmware drivers
#
# CONFIG_ARM_SCMI is not set
# end of Firmware drivers

CONFIG_FLASH_HAS_DRIVER_ENABLED=y
CONFIG_FLASH_HAS_NO_EXPLICIT_ERASE=y
CONFIG_FLASH_HAS_PAGE_LAYOUT=y
CONFIG_FLASH_PAGE_LAYOUT=y

#
# MSPI flash device driver
#
# end of MSPI flash device driver

CONFIG_FLASH_NRF_FORCE_ALT=y
CONFIG_SOC_FLASH_NRF_RADIO_SYNC_NONE=y
CONFIG_SOC_FLASH_NRF_RRAM=y
CONFIG_NRF_RRAM_WRITE_BUFFER_SIZE=1
CONFIG_NRF_RRAM_READYNEXT_TIMEOUT_VALUE=128
CONFIG_NRF_RRAM_REGION_ADDRESS_RESOLUTION=0x1000
CONFIG_NRF_RRAM_REGION_SIZE_UNIT=0x1000
# CONFIG_FPGA is not set
# CONFIG_FUEL_GAUGE is not set
# CONFIG_GNSS is not set
# CONFIG_GPIO_GET_DIRECTION is not set
# CONFIG_GPIO_GET_CONFIG is not set
# CONFIG_GPIO_HOGS is not set
# CONFIG_GPIO_ENABLE_DISABLE_INTERRUPT is not set
CONFIG_GPIO_NRFX=y
CONFIG_GPIO_NRFX_INTERRUPT=y
# CONFIG_GPIO_RTS5912 is not set
# CONFIG_HAPTICS is not set
# CONFIG_HWINFO is not set
# CONFIG_HWSPINLOCK is not set
# CONFIG_I2C is not set
# CONFIG_I2S is not set
# CONFIG_I3C is not set

#
# Interrupt controller drivers
#
CONFIG_INTC_INIT_PRIORITY=40
# end of Interrupt controller drivers

# CONFIG_IPM is not set
# CONFIG_KSCAN is not set
# CONFIG_LED is not set
# CONFIG_LED_STRIP is not set
# CONFIG_LORA is not set
# CONFIG_MBOX is not set
# CONFIG_MDIO is not set
# CONFIG_MIPI_DBI is not set

#
# Miscellaneous Drivers
#
# CONFIG_TIMEAWARE_GPIO is not set
# end of Miscellaneous Drivers

# CONFIG_MM_DRV is not set
# CONFIG_MSPI is not set
# CONFIG_PCIE is not set
# CONFIG_PCIE_ENDPOINT is not set
# CONFIG_PECI is not set
# CONFIG_PINCTRL is not set
# CONFIG_PM_CPU_OPS is not set
# CONFIG_PS2 is not set
# CONFIG_PTP_CLOCK is not set
# CONFIG_PWM is not set
# CONFIG_RETAINED_MEM is not set
# CONFIG_RTC is not set
# CONFIG_SDHC is not set
# CONFIG_SMBUS is not set
# CONFIG_STEPPER is not set

#
# Timer drivers
#
CONFIG_TIMER_HAS_64BIT_CYCLE_COUNTER=y
# CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME is not set
# CONFIG_SYSTEM_CLOCK_SLOPPY_IDLE is not set
CONFIG_SYSTEM_CLOCK_INIT_PRIORITY=0
CONFIG_TICKLESS_CAPABLE=y
CONFIG_NRF_GRTC_TIMER=y
# CONFIG_NRF_GRTC_TIMER_APP_DEFINED_INIT is not set
CONFIG_NRF_GRTC_START_SYSCOUNTER=y
CONFIG_NRF_GRTC_TIMER_CLOCK_MANAGEMENT=y
CONFIG_NRF_GRTC_TIMER_AUTO_KEEP_ALIVE=y
# CONFIG_SYSTEM_CLOCK_NO_WAIT is not set
# CONFIG_SYSTEM_CLOCK_WAIT_FOR_AVAILABILITY is not set
CONFIG_SYSTEM_CLOCK_WAIT_FOR_STABILITY=y
# CONFIG_REALTEK_RTS5912_RTMR is not set
# end of Timer drivers

# CONFIG_USB_BC12 is not set
# CONFIG_UDC_DRIVER is not set
# CONFIG_UHC_DRIVER is not set
# CONFIG_UVB is not set
# CONFIG_USB_DEVICE_DRIVER is not set
# CONFIG_USBC_TCPC_DRIVER is not set
# CONFIG_USBC_VBUS_DRIVER is not set
# CONFIG_USBC_PPC_DRIVER is not set
# CONFIG_VIDEO is not set
# CONFIG_VIRTUALIZATION is not set
# CONFIG_W1 is not set
# CONFIG_TEE is not set
# end of Device Drivers

# CONFIG_REQUIRES_FULL_LIBC is not set
# CONFIG_REQUIRES_FLOAT_PRINTF is not set
CONFIG_FULL_LIBC_SUPPORTED=y
CONFIG_MINIMAL_LIBC_SUPPORTED=y
CONFIG_NEWLIB_LIBC_SUPPORTED=y
CONFIG_PICOLIBC_SUPPORTED=y

#
# C Library
#
CONFIG_MINIMAL_LIBC=y
# CONFIG_PICOLIBC is not set
# CONFIG_NEWLIB_LIBC is not set
# CONFIG_EXTERNAL_LIBC is not set
CONFIG_HAS_NEWLIB_LIBC_NANO=y
CONFIG_COMMON_LIBC_ABORT=y
CONFIG_COMMON_LIBC_ASCTIME=y
CONFIG_COMMON_LIBC_ASCTIME_R=y
CONFIG_COMMON_LIBC_CTIME=y
CONFIG_COMMON_LIBC_CTIME_R=y
CONFIG_COMMON_LIBC_GMTIME_R=y
CONFIG_COMMON_LIBC_LOCALTIME_R_UTC=y
CONFIG_COMMON_LIBC_MALLOC=y
CONFIG_COMMON_LIBC_CALLOC=y
CONFIG_COMMON_LIBC_REALLOCARRAY=y
CONFIG_COMMON_LIBC_STRNLEN=y
# CONFIG_COMMON_LIBC_REMOVE is not set
CONFIG_MINIMAL_LIBC_NON_REENTRANT_FUNCTIONS=y
# CONFIG_MINIMAL_LIBC_LL_PRINTF is not set
# CONFIG_MINIMAL_LIBC_RAND is not set
CONFIG_MINIMAL_LIBC_TIME=y
# CONFIG_MINIMAL_LIBC_STRING_ERROR_TABLE is not set
CONFIG_NEED_LIBC_MEM_PARTITION=y
# end of C Library

#
# C++ Language Support
#
# CONFIG_CPP is not set
# end of C++ Language Support

# CONFIG_CRC is not set

#
# Additional libraries
#

#
# Hash Function Support
#
# CONFIG_SYS_HASH_FUNC32 is not set
# end of Hash Function Support

#
# Hashmap (Hash Table) Support
#
# CONFIG_SYS_HASH_MAP is not set
# end of Hashmap (Hash Table) Support

#
# Heap and Memory Allocation
#
# CONFIG_SYS_HEAP_STRESS is not set
# CONFIG_SYS_HEAP_INFO is not set
CONFIG_SYS_HEAP_ALLOC_LOOPS=3
# CONFIG_SYS_HEAP_RUNTIME_STATS is not set
# CONFIG_SYS_HEAP_LISTENER is not set
# CONFIG_SYS_HEAP_SMALL_ONLY is not set
# CONFIG_SYS_HEAP_BIG_ONLY is not set
CONFIG_SYS_HEAP_AUTO=y
# CONFIG_MULTI_HEAP is not set
# CONFIG_SHARED_MULTI_HEAP is not set
# end of Heap and Memory Allocation

#
# Memory Blocks
#
# CONFIG_SYS_MEM_BLOCKS is not set
# end of Memory Blocks

# CONFIG_NET_BUF is not set

#
# OS Support Library
#
# CONFIG_FDTABLE is not set
CONFIG_ZVFS_OPEN_MAX=4
# CONFIG_PRINTK_SYNC is not set
# CONFIG_MPSC_PBUF is not set
# CONFIG_SPSC_PBUF is not set
CONFIG_HAS_POWEROFF=y
# CONFIG_POWEROFF is not set
# CONFIG_CBPRINTF_COMPLETE is not set
CONFIG_CBPRINTF_NANO=y
CONFIG_CBPRINTF_FULL_INTEGRAL=y
# CONFIG_CBPRINTF_REDUCED_INTEGRAL is not set
# CONFIG_CBPRINTF_FP_A_SUPPORT is not set
# CONFIG_CBPRINTF_FP_ALWAYS_A is not set
CONFIG_CBPRINTF_LIBC_SUBSTS=y
# CONFIG_CBPRINTF_PACKAGE_LONGDOUBLE is not set
# CONFIG_CBPRINTF_STATIC_PACKAGE_CHECK_ALIGNMENT is not set
CONFIG_CBPRINTF_CONVERT_CHECK_PTR=y
# CONFIG_ZVFS is not set
# end of OS Support Library

#
# POSIX API Support
#

#
# POSIX Options
#
# CONFIG_POSIX_API is not set
CONFIG_POSIX_AEP_CHOICE_NONE=y
# CONFIG_POSIX_AEP_CHOICE_BASE is not set
# CONFIG_POSIX_AEP_CHOICE_PSE51 is not set
# CONFIG_POSIX_AEP_CHOICE_PSE52 is not set
# CONFIG_POSIX_AEP_CHOICE_PSE53 is not set
# CONFIG_POSIX_ASYNCHRONOUS_IO is not set
# CONFIG_POSIX_BARRIERS is not set
CONFIG_POSIX_C_LANG_SUPPORT_R=y
# CONFIG_POSIX_C_LIB_EXT is not set

#
# POSIX device I/O
#
# CONFIG_POSIX_DEVICE_IO is not set
CONFIG_POSIX_OPEN_MAX=4
# end of POSIX device I/O

# CONFIG_POSIX_FD_MGMT is not set
# CONFIG_POSIX_FILE_SYSTEM_R is not set
# CONFIG_POSIX_FILE_SYSTEM is not set

#
# POSIX memory
#
CONFIG_POSIX_PAGE_SIZE=0x40
# CONFIG_POSIX_SHARED_MEMORY_OBJECTS is not set
# CONFIG_POSIX_MAPPED_FILES is not set
# CONFIG_POSIX_MEMORY_PROTECTION is not set
# end of POSIX memory

# CONFIG_POSIX_MESSAGE_PASSING is not set
# CONFIG_POSIX_SINGLE_PROCESS is not set
# CONFIG_POSIX_MULTI_PROCESS is not set
# CONFIG_POSIX_THREADS is not set
# CONFIG_POSIX_READER_WRITER_LOCKS is not set

#
# POSIX scheduler options
#
# CONFIG_POSIX_PRIORITY_SCHEDULING is not set
# end of POSIX scheduler options

# CONFIG_POSIX_SEMAPHORES is not set

#
# POSIX signals
#
# CONFIG_POSIX_REALTIME_SIGNALS is not set
# CONFIG_POSIX_SIGNALS is not set
# end of POSIX signals

# CONFIG_POSIX_SPIN_LOCKS is not set

#
# POSIX synchronized I/O
#
# CONFIG_POSIX_FSYNC is not set
# CONFIG_POSIX_SYNCHRONIZED_IO is not set
# end of POSIX synchronized I/O

# CONFIG_POSIX_TIMERS is not set

#
# X/Open system interfaces
#
# CONFIG_XOPEN_STREAMS is not set
# CONFIG_XSI_SYSTEM_LOGGING is not set
# CONFIG_XSI_THREADS_EXT is not set
# end of X/Open system interfaces

#
# Miscellaneous POSIX-related options
#
# CONFIG_EVENTFD is not set
# end of Miscellaneous POSIX-related options

#
# Deprecated POSIX options
#
CONFIG_EVENTFD_MAX=0
# CONFIG_FNMATCH is not set
CONFIG_MAX_PTHREAD_COUNT=0
CONFIG_MAX_PTHREAD_KEY_COUNT=0
CONFIG_MAX_TIMER_COUNT=0
CONFIG_MSG_COUNT_MAX=0
# CONFIG_POSIX_CLOCK is not set
# CONFIG_POSIX_FS is not set
CONFIG_POSIX_LIMITS_RTSIG_MAX=0
CONFIG_POSIX_MAX_FDS=4
CONFIG_POSIX_MAX_OPEN_FILES=4
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_POSIX_PUTMSG is not set
# CONFIG_POSIX_SIGNAL is not set
# CONFIG_POSIX_SYSCONF is not set
# CONFIG_POSIX_UNAME is not set
# CONFIG_PTHREAD is not set
# CONFIG_PTHREAD_BARRIER is not set
# CONFIG_PTHREAD_COND is not set
# CONFIG_PTHREAD_IPC is not set
# CONFIG_PTHREAD_KEY is not set
# CONFIG_PTHREAD_MUTEX is not set
# CONFIG_PTHREAD_RWLOCK is not set
# CONFIG_PTHREAD_SPINLOCK is not set
# CONFIG_TIMER is not set
CONFIG_TIMER_DELAYTIMER_MAX=0
CONFIG_SEM_NAMELEN_MAX=0
CONFIG_SEM_VALUE_MAX=0
# end of Deprecated POSIX options
# end of POSIX Options

#
# POSIX Shell Utilities
#
# end of POSIX Shell Utilities
# end of POSIX API Support

# CONFIG_OPENAMP_RSC_TABLE is not set
# CONFIG_SMF is not set
CONFIG_LIBGCC_RTLIB=y

#
# Utility Library
#
# CONFIG_JSON_LIBRARY is not set
# CONFIG_RING_BUFFER is not set
CONFIG_NOTIFY=y
# CONFIG_BASE64 is not set
CONFIG_ONOFF=y
# CONFIG_UTF8 is not set
# end of Utility Library
# end of Additional libraries

#
# Subsystems and OS Services
#
# CONFIG_BINDESC is not set
# CONFIG_BT is not set

#
# Controller Area Network (CAN) bus subsystem
#
# end of Controller Area Network (CAN) bus subsystem

# CONFIG_CONSOLE_SUBSYS is not set
# CONFIG_DAP is not set

#
# System Monitoring Options
#
# CONFIG_THREAD_ANALYZER is not set
# end of System Monitoring Options

#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_STACK_USAGE is not set
CONFIG_PRINTK=y
CONFIG_EARLY_CONSOLE=y
# CONFIG_FORCE_NO_ASSERT is not set
CONFIG_ASSERT_VERBOSE=y
# CONFIG_ASSERT_NO_FILE_INFO is not set
# CONFIG_ASSERT_NO_COND_INFO is not set
# CONFIG_ASSERT_NO_MSG_INFO is not set
# CONFIG_ASSERT_TEST is not set
# CONFIG_OVERRIDE_FRAME_POINTER_DEFAULT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_THREAD_INFO is not set
# CONFIG_DEBUG_COREDUMP is not set
# CONFIG_SYMTAB is not set
# end of Debugging Options

# CONFIG_MIPI_STP_DECODER is not set
# CONFIG_CS_TRACE_DEFMT is not set
# CONFIG_DISK_ACCESS is not set
# CONFIG_DSP is not set
# CONFIG_EMUL is not set
# CONFIG_CHARACTER_FRAMEBUFFER is not set

#
# File Systems
#
# CONFIG_FILE_SYSTEM_LIB_LINK is not set
# CONFIG_FILE_SYSTEM is not set
# CONFIG_FCB is not set
# end of File Systems

#
# Inter Processor Communication
#
# CONFIG_RPMSG_SERVICE is not set
# CONFIG_IPC_SERVICE is not set
# end of Inter Processor Communication

# CONFIG_JWT is not set
# CONFIG_LLEXT is not set

#
# Linkable loadable Extension Development Kit (EDK)
#
CONFIG_LLEXT_EDK_NAME="llext-edk"
# CONFIG_LLEXT_EDK_USERSPACE_ONLY is not set
# end of Linkable loadable Extension Development Kit (EDK)

#
# Logging
#
# CONFIG_LOG_OUTPUT is not set
# end of Logging

CONFIG_MEM_ATTR=y
# CONFIG_MEM_ATTR_HEAP is not set

#
# Device Management
#

#
# Host command handler subsystem
#
# CONFIG_EC_HOST_CMD is not set
# end of Host command handler subsystem

# CONFIG_OSDP is not set
# end of Device Management

# CONFIG_MODBUS is not set
# CONFIG_MODEM_MODULES is not set

#
# Networking
#
# CONFIG_NETWORKING is not set
# end of Networking

#
# Power Management
#
# CONFIG_PM_POLICY_LATENCY_STANDALONE is not set
# end of Power Management

#
# Portability
#
# end of Portability

# CONFIG_PROFILING is not set

#
# Random Number Generators
#
# CONFIG_TEST_RANDOM_GENERATOR is not set
CONFIG_TIMER_RANDOM_INITIAL_STATE=123456789
CONFIG_CSPRNG_AVAILABLE=y
# end of Random Number Generators

# CONFIG_RTIO is not set

#
# SD
#
# CONFIG_MMC_STACK is not set
# CONFIG_SDMMC_STACK is not set
# CONFIG_SDIO_STACK is not set
# end of SD

# CONFIG_SECURE_STORAGE is not set
# CONFIG_SETTINGS is not set
# CONFIG_SHELL is not set
# CONFIG_STATS is not set

#
# Storage
#
CONFIG_FLASH_MAP=y
# CONFIG_FLASH_AREA_CHECK_INTEGRITY is not set
# CONFIG_FLASH_MAP_LABELS is not set
# CONFIG_STREAM_FLASH is not set
# end of Storage

# CONFIG_TASK_WDT is not set

#
# Testing
#
# CONFIG_ZTEST is not set
# CONFIG_ZTEST_MOCKING is not set
# CONFIG_ZTRESS is not set
# CONFIG_TEST is not set
# CONFIG_FORCE_COVERAGE is not set
# CONFIG_TEST_USERSPACE is not set
# end of Testing

# CONFIG_TIMING_FUNCTIONS is not set
# CONFIG_TRACING is not set
# CONFIG_USB_DEVICE_STACK is not set
# CONFIG_USB_DEVICE_STACK_NEXT is not set
# CONFIG_USB_HOST_STACK is not set
# CONFIG_USBC_STACK is not set
# CONFIG_MODULES is not set
# end of Subsystems and OS Services

CONFIG_TOOLCHAIN_ZEPHYR_0_17=y
CONFIG_TOOLCHAIN_ZEPHYR_SUPPORTS_THREAD_LOCAL_STORAGE=y
CONFIG_TOOLCHAIN_ZEPHYR_SUPPORTS_GNU_EXTENSIONS=y

#
# Build and Link Features
#

#
# Linker Options
#
# CONFIG_LINKER_ORPHAN_SECTION_PLACE is not set
CONFIG_LINKER_ORPHAN_SECTION_WARN=y
# CONFIG_LINKER_ORPHAN_SECTION_ERROR is not set
CONFIG_FLASH_LOAD_SIZE=0x10000
CONFIG_ROM_END_OFFSET=0
CONFIG_LD_LINKER_SCRIPT_SUPPORTED=y
CONFIG_LD_LINKER_TEMPLATE=y
# CONFIG_CMAKE_LINKER_GENERATOR is not set
# CONFIG_HAVE_CUSTOM_LINKER_SCRIPT is not set
CONFIG_LINKER_SORT_BY_ALIGNMENT=y

#
# Linker Sections
#
# CONFIG_LINKER_USE_BOOT_SECTION is not set
# CONFIG_LINKER_USE_PINNED_SECTION is not set
CONFIG_LINKER_GENERIC_SECTIONS_PRESENT_AT_BOOT=y
CONFIG_LINKER_LAST_SECTION_ID=y
CONFIG_LINKER_LAST_SECTION_ID_PATTERN=0xE015E015
CONFIG_LINKER_USE_RELAX=y
# end of Linker Sections

CONFIG_LINKER_ITERABLE_SUBALIGN=4
CONFIG_LINKER_DEVNULL_SUPPORT=y
# CONFIG_LINKER_DEVNULL_MEMORY is not set
# end of Linker Options

#
# Compiler Options
#
# CONFIG_STD_C90 is not set
CONFIG_STD_C99=y
# CONFIG_STD_C11 is not set
# CONFIG_STD_C17 is not set
# CONFIG_STD_C23 is not set
CONFIG_TOOLCHAIN_SUPPORTS_GNU_EXTENSIONS=y
# CONFIG_GNU_C_EXTENSIONS is not set
# CONFIG_CODING_GUIDELINE_CHECK is not set
CONFIG_COMPILER_FREESTANDING=y
CONFIG_SIZE_OPTIMIZATIONS=y
# CONFIG_SIZE_OPTIMIZATIONS_AGGRESSIVE is not set
# CONFIG_SPEED_OPTIMIZATIONS is not set
# CONFIG_DEBUG_OPTIMIZATIONS is not set
# CONFIG_NO_OPTIMIZATIONS is not set
# CONFIG_COMPILER_WARNINGS_AS_ERRORS is not set
# CONFIG_COMPILER_SAVE_TEMPS is not set
CONFIG_COMPILER_TRACK_MACRO_EXPANSION=y
CONFIG_COMPILER_COLOR_DIAGNOSTICS=y
CONFIG_FORTIFY_SOURCE_NONE=y
# CONFIG_FORTIFY_SOURCE_COMPILE_TIME is not set
# CONFIG_FORTIFY_SOURCE_RUN_TIME is not set
CONFIG_COMPILER_OPT=""
# CONFIG_MISRA_SANE is not set
# end of Compiler Options

# CONFIG_ASSERT_ON_ERRORS is not set
# CONFIG_NO_RUNTIME_CHECKS is not set
CONFIG_RUNTIME_ERROR_CHECKS=y

#
# Build Options
#
CONFIG_KERNEL_BIN_NAME="zephyr"
CONFIG_OUTPUT_STAT=y
# CONFIG_OUTPUT_SYMBOLS is not set
# CONFIG_OUTPUT_DISASSEMBLY is not set
CONFIG_OUTPUT_PRINT_MEMORY_USAGE=y
# CONFIG_CLEANUP_INTERMEDIATE_FILES is not set
CONFIG_BUILD_GAP_FILL_PATTERN=0xFF
# CONFIG_BUILD_NO_GAP_FILL is not set
# CONFIG_BUILD_OUTPUT_HEX_GAP_FILL is not set
# CONFIG_BUILD_OUTPUT_EXE is not set
# CONFIG_BUILD_OUTPUT_S19_GAP_FILL is not set
# CONFIG_BUILD_OUTPUT_UF2 is not set
# CONFIG_BUILD_OUTPUT_STRIPPED is not set
# CONFIG_BUILD_OUTPUT_COMPRESS_DEBUG_SECTIONS is not set
# CONFIG_BUILD_ALIGN_LMA is not set
# CONFIG_APPLICATION_DEFINED_SYSCALL is not set
# CONFIG_MAKEFILE_EXPORTS is not set
# CONFIG_BUILD_OUTPUT_META is not set
CONFIG_BUILD_OUTPUT_STRIP_PATHS=y
CONFIG_CHECK_INIT_PRIORITIES=y
# CONFIG_EMIT_ALL_SYSCALLS is not set
# end of Build Options

CONFIG_DEPRECATED=y
CONFIG_WARN_DEPRECATED=y
CONFIG_ENFORCE_ZEPHYR_STDINT=y
# end of Build and Link Features

#
# Boot Options
#
# CONFIG_IS_BOOTLOADER is not set
# CONFIG_BOOTLOADER_BOSSA is not set
# end of Boot Options

#
# Compatibility
#
CONFIG_LEGACY_GENERATED_INCLUDE_PATH=y
# end of Compatibility

  • 0 in reply to ByteSpectrum

    Hi Tarun,

    I checked the files. So MCUboot doesn't get any BT power config applied, which is expected, because it doesn't have a BT stack. However, that also means that there shouldn't be any strange reason it could affect the TX Power of the main application, whose configurations are properly in place.

    Do you use dynamic TX Power control? If not, please try to disable CONFIG_BT_CTLR_TX_PWR_DYNAMIC_CONTROL.

    If you use dynamic TX Power control, then please try to set it in code.

    Hieu

  • 0 in reply to Hieu

    Hi Hieu,

    I have found a puzzling issue.

    When I updated only the application using an Over-the-Air (OTA) update, the problem persists each and every time. However, when I erased whole flash and flashed both the bootloader and the application together using a programmer, the issue disappeared. Now I am not able to reproduce it.

    Any ideas why this might be happening?

    Thanks,

    Tarun

  • 0 in reply to ByteSpectrum

    Hi Tarun,

    Could you please compare the .bin files from the OTA payload and the merged.hex file you flash directly with the programmer? Are there any chances they are different?

    Regards,

    Hieu

Related
Terms of service