AVSystems Cell-Assist localisation broken?

Update: Its still working - I could resolve the issue with ChatGPTs expertise - the nrf Cloud evaluation  key stored in Coiote was older then 30 days... Thats a thing which could go into the FAQs...

Original post:
Hi,

We were basing the development of our new LTE-based IoT device fleet on this webinar https://youtu.be/hh3h5Ow1TmE?si=Fm0LcOy2_zO1XUW6&t=1695 and the avsystems + cell-assist localisation example.


This was working the last months as you can see in the screenshot below showing an old cell-based fix of my daily nrf9151DK:




This week I realized I dont see any location of any registered device anymore. To verify, that not our own changes did break something I did recreate the original setup
- nrf9151DK
- SDK 3.0.2
- nrf/lwm2m_client sample
- extra kconfig fragments: overlay-avsystems.conf, overlay-assist-cell.conf, overlay-rtt.conf (log and shell via Segger RTT instead of UART)
- build and flash


- created a fresh account on AVsystems coiote, setup my ndk
- powered on the device
- coiote shows "device last seen X seconds ago"

below you can see a couple of logs running this sample firmware - it always shows localization errors on the console, coiote sees the device lwm2m-tree, the device' cellid on /4/0/8 but the device never gets a fix and therefore /6/0/* never gets set long/lat values:





dl-sh:~$ [00:00:01.026,611] <inf> app_lwm2m_client: This may take several minutes.
dl-sh:~$ dl-sh:~$ [00:00:03.437,866] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 2
dl-sh:~$ dl-sh:~$ [00:00:26.960,021] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 1
dl-sh:~$ [00:00:26.960,876] <inf> app_lwm2m_client: Connected to LTE network
dl-sh:~$ [00:00:26.966,125] <inf> app_lwm2m_client: Client connect to server
dl-sh:~$ [00:00:26.966,308] <inf> net_lwm2m_rd_client: Start LWM2M Client: urn:imei:359404230130024
dl-sh:~$ [00:00:26.966,644] <inf> net_lwm2m_rd_client: RD Client started with endpoint 'urn:imei:359404230130024' with client lifetime 43200 using server object 0
dl-sh:~$ [00:00:26.967,041] <inf> app_lwm2m_client: LwM2M is connecting to server
dl-sh:~$ [00:00:27.388,275] <inf> lwm2m_security: Need to write credentials, requesting LTE and GNSS offline...
dl-sh:~$ [00:00:27.512,664] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 0
dl-sh:~$ [00:00:27.512,817] <inf> app_lwm2m_client: LwM2M is connecting to server
dl-sh:~$ dl-sh:~$ [00:00:28.536,468] <err> lte_lc: Sending AT%NCELLMEAS failed, error: 131589
dl-sh:~$ [00:00:28.602,935] <inf> lwm2m_security: Requesting LTE and GNSS online
dl-sh:~$ dl-sh:~$ [00:00:29.673,400] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 2
dl-sh:~$ [00:00:30.330,139] <inf> lwm2m_security: Modem connection restored
dl-sh:~$ [00:00:30.330,657] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 1
dl-sh:~$ [00:00:30.331,451] <inf> app_lwm2m_client: LwM2M is connecting to server
dl-sh:~$ [00:00:30.641,937] <inf> net_lwm2m_engine: Connected, sock id 1
dl-sh:~$ dl-sh:~$ [00:00:30.717,498] <dbg> app_lwm2m_client: rd_client_event: Registration complete
dl-sh:~$ [00:00:30.717,590] <inf> net_lwm2m_rd_client: Registration Done (EP='urn:imei:359404230130024')
dl-sh:~$ [00:00:30.718,139] <inf> app_lwm2m_client: LwM2M is connected to server
dl-sh:~$ [00:00:30.718,200] <inf> app_lwm2m_client: Obtained date-time from modem
dl-sh:~$ dl-sh:~$ [00:01:04.278,778] <inf> lwm2m_rai: RAI enabled
dl-sh:~$ [00:01:04.278,808] <dbg> app_lwm2m_client: rd_client_event: Queue mode RX window closed
dl-sh:~$ dl-sh:~$
dl-sh:~$ [00:00:00.253,570] <inf> spi_nor: gd25wb256e3ir@1: 32 MiBy flash
dl-sh:~$ *** Booting nRF Connect SDK v3.0.2-89ba1294ac9b ***
dl-sh:~$ *** Using Zephyr OS v4.0.99-f791c49f492c ***
dl-sh:~$ [00:00:00.258,605] <inf> app_lwm2m_client: Run LWM2M client
dl-sh:~$ [00:00:00.512,481] <inf> app_lwm2m_client: endpoint: urn:imei:359404230092844
dl-sh:~$ [00:00:00.671,234] <inf> lwm2m_lte_notification: Registering ncell notification handler
dl-sh:~$ [00:00:00.671,325] <inf> lwm2m_firmware: Image is confirmed OK
dl-sh:~$ [00:00:00.671,325] <inf> app_lwm2m_client: Connecting to network.
dl-sh:~$ [00:00:00.671,356] <inf> app_lwm2m_client: This may take several minutes.
dl-sh:~$ [00:00:00.980,712] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 90
dl-sh:~$ dl-sh:~$
dl-sh:~$ [00:00:00.253,631] <inf> spi_nor: gd25wb256e3ir@1: 32 MiBy flash
dl-sh:~$ *** Booting nRF Connect SDK v3.0.2-89ba1294ac9b ***
dl-sh:~$ *** Using Zephyr OS v4.0.99-f791c49f492c ***
dl-sh:~$ [00:00:00.258,666] <inf> app_lwm2m_client: Run LWM2M client
dl-sh:~$ [00:00:00.512,390] <inf> app_lwm2m_client: endpoint: urn:imei:359404230092844
dl-sh:~$ [00:00:00.670,867] <inf> lwm2m_lte_notification: Registering ncell notification handler
dl-sh:~$ [00:00:00.670,959] <inf> lwm2m_firmware: Image is confirmed OK
dl-sh:~$ [00:00:00.670,959] <inf> app_lwm2m_client: Connecting to network.
dl-sh:~$ [00:00:00.670,989] <inf> app_lwm2m_client: This may take several minutes.
dl-sh:~$ dl-sh:~$ [00:00:03.503,326] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 2
dl-sh:~$ dl-sh:~$ [00:00:05.029,174] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 1
dl-sh:~$ [00:00:05.030,029] <inf> app_lwm2m_client: Connected to LTE network
dl-sh:~$ [00:00:05.035,919] <inf> app_lwm2m_client: Client connect to server
dl-sh:~$ [00:00:05.035,980] <inf> net_lwm2m_rd_client: Start LWM2M Client: urn:imei:359404230092844
dl-sh:~$ [00:00:05.036,468] <inf> net_lwm2m_rd_client: RD Client started with endpoint 'urn:imei:359404230092844' with client lifetime 43200 using server object 0
dl-sh:~$ [00:00:05.036,865] <inf> app_lwm2m_client: LwM2M is connecting to server
dl-sh:~$ [00:00:05.241,180] <inf> lwm2m_security: Need to write credentials, requesting LTE and GNSS offline...
dl-sh:~$ [00:00:05.270,507] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 0
dl-sh:~$ [00:00:05.270,629] <inf> app_lwm2m_client: LwM2M is connecting to server
dl-sh:~$ [00:00:06.006,439] <inf> lwm2m_security: Requesting LTE and GNSS online
dl-sh:~$ dl-sh:~$ [00:00:06.065,795] <wrn> lte_lc: NCELLMEAS failed
dl-sh:~$ [00:00:06.065,826] <inf> net_lwm2m_obj_signal_meas_info: Updating information for 0 neighbouring cells
dl-sh:~$ [00:00:07.039,428] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 2
dl-sh:~$ dl-sh:~$ [00:00:07.756,072] <inf> lwm2m_security: Modem connection restored
dl-sh:~$ [00:00:07.756,652] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 1
dl-sh:~$ [00:00:07.757,171] <inf> app_lwm2m_client: LwM2M is connecting to server
dl-sh:~$ [00:00:08.110,107] <inf> net_lwm2m_engine: Connected, sock id 1
dl-sh:~$ dl-sh:~$ [00:00:09.284,545] <dbg> app_lwm2m_client: rd_client_event: Registration complete
dl-sh:~$ [00:00:09.284,637] <inf> net_lwm2m_rd_client: Registration Done (EP='urn:imei:359404230092844')
dl-sh:~$ [00:00:09.285,186] <inf> app_lwm2m_client: LwM2M is connected to server
dl-sh:~$ [00:00:09.285,247] <inf> app_lwm2m_client: Obtained date-time from modem
dl-sh:~$ dl-sh:~$ [00:00:43.866,088] <inf> lwm2m_rai: RAI enabled
dl-sh:~$ [00:00:43.866,119] <dbg> app_lwm2m_client: rd_client_event: Queue mode RX window closed
dl-sh:~$ dl-sh:~$ [00:00:51.303,070] <inf> app_lwm2m_client: Send cell location request event
dl-sh:~$ [00:00:51.303,222] <dbg> app_lwm2m: app_event_handler: Button 2 changed state to 1.
dl-sh:~$ [00:00:51.306,701] <inf> net_lwm2m_message_handling: Send op to server (/dp)
dl-sh:~$ [00:00:51.306,884] <dbg> app_lwm2m_client: rd_client_event: Registration update started
dl-sh:~$ [00:00:51.464,355] <dbg> app_lwm2m: app_event_handler: Button 2 changed state to 0.
dl-sh:~$ [00:00:51.893,463] <inf> net_lwm2m_rd_client: Update callback (code:2.4)
dl-sh:~$ [00:00:51.893,493] <dbg> app_lwm2m_client: rd_client_event: Registration update complete
dl-sh:~$ [00:00:51.893,554] <inf> net_lwm2m_rd_client: Update Done
dl-sh:~$ [00:00:51.958,557] <inf> net_lwm2m_message_handling: Send done!
dl-sh:~$ dl-sh:~$
dl-sh:~$ [00:00:00.253,631] <inf> spi_nor: gd25wb256e3ir@1: 32 MiBy flash
dl-sh:~$ *** Booting nRF Connect SDK v3.0.2-89ba1294ac9b ***
dl-sh:~$ *** Using Zephyr OS v4.0.99-f791c49f492c ***
dl-sh:~$ [00:00:00.258,666] <inf> app_lwm2m_client: Run LWM2M client
dl-sh:~$ [00:00:00.512,939] <inf> app_lwm2m_client: endpoint: urn:imei:359404230092844
dl-sh:~$ [00:00:00.678,405] <inf> lwm2m_lte_notification: Registering ncell notification handler
dl-sh:~$ [00:00:00.678,497] <inf> lwm2m_firmware: Image is confirmed OK
dl-sh:~$ [00:00:00.678,497] <inf> app_lwm2m_client: Connecting to network.
dl-sh:~$ [00:00:00.678,497] <inf> app_lwm2m_client: This may take several minutes.
dl-sh:~$ dl-sh:~$ [00:00:03.689,422] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 2
dl-sh:~$ dl-sh:~$ [00:00:05.140,808] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 1
dl-sh:~$ [00:00:05.141,662] <inf> app_lwm2m_client: Connected to LTE network
dl-sh:~$ [00:00:05.146,942] <inf> app_lwm2m_client: Client connect to server
dl-sh:~$ [00:00:05.147,827] <inf> net_lwm2m_rd_client: Start LWM2M Client: urn:imei:359404230092844
dl-sh:~$ [00:00:05.148,254] <inf> net_lwm2m_rd_client: RD Client started with endpoint 'urn:imei:359404230092844' with client lifetime 43200 using server object 0
dl-sh:~$ [00:00:05.148,651] <inf> app_lwm2m_client: LwM2M is connecting to server
dl-sh:~$ [00:00:05.553,985] <inf> lwm2m_security: Need to write credentials, requesting LTE and GNSS offline...
dl-sh:~$ [00:00:05.625,122] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 0
dl-sh:~$ [00:00:05.625,274] <inf> app_lwm2m_client: LwM2M is connecting to server
dl-sh:~$ dl-sh:~$ [00:00:06.207,305] <err> lte_lc: Sending AT%NCELLMEAS failed, error: 131589
dl-sh:~$ [00:00:06.279,876] <inf> lwm2m_security: Requesting LTE and GNSS online
dl-sh:~$ dl-sh:~$ [00:00:07.331,024] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 2
dl-sh:~$ [00:00:08.068,206] <inf> lwm2m_security: Modem connection restored
dl-sh:~$ [00:00:08.069,152] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 1
dl-sh:~$ [00:00:08.069,915] <inf> app_lwm2m_client: LwM2M is connecting to server
dl-sh:~$ dl-sh:~$ [00:00:08.338,500] <inf> net_lwm2m_engine: Connected, sock id 1
dl-sh:~$ [00:00:08.721,954] <dbg> app_lwm2m_client: rd_client_event: Registration complete
dl-sh:~$ [00:00:08.722,045] <inf> net_lwm2m_rd_client: Registration Done (EP='urn:imei:359404230092844')
dl-sh:~$ [00:00:08.722,564] <inf> app_lwm2m_client: LwM2M is connected to server
dl-sh:~$ [00:00:08.722,656] <inf> app_lwm2m_client: Obtained date-time from modem
dl-sh:~$ dl-sh:~$ [00:00:42.055,603] <inf> lwm2m_rai: RAI enabled
dl-sh:~$ [00:00:42.055,633] <dbg> app_lwm2m_client: rd_client_event: Queue mode RX window closed
dl-sh:~$ dl-sh:~$

Parents Reply Children
  • My setup: nRF9151 DK, SDK v3.0.2, Ubuntu 24.04. I built the lwm2m_client sample using the same overlays you mentioned in your first message, and tested with two SIM cards from different operators. The sample also works correctly on the nRF9161 DK. Unfortunately, I don’t have access to a Windows 11 PC to test further.

    Best regards,
    Juha

  • I did the same and it doesnt. This is the log output of the sample build with SDK v3.0.2, on Ubuntu 24.04 within VSCode and flashed to a nRF9151 DK



    dl-sh:~$ [00:00:04.891,632] <inf> app_lwm2m_client: Connected to LTE network
    dl-sh:~$ [00:00:04.897,949] <inf> app_lwm2m_client: Client connect to server
    dl-sh:~$ [00:00:04.897,979] <inf> net_lwm2m_rd_client: Start LWM2M Client: urn:imei:3594XXXXX130024
    dl-sh:~$ [00:00:04.898,681] <inf> net_lwm2m_rd_client: RD Client started with endpoint 'urn:imei:3594XXXXX130024' with client lifetime 43200 using server object 0
    dl-sh:~$ [00:00:04.898,925] <inf> app_lwm2m_client: LwM2M is connecting to server
    dl-sh:~$ [00:00:05.094,757] <inf> lwm2m_security: Need to write credentials, requesting LTE and GNSS offline...
    dl-sh:~$ [00:00:05.528,625] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 0
    dl-sh:~$ [00:00:05.528,930] <inf> app_lwm2m_client: LwM2M is connecting to server
    dl-sh:~$ dl-sh:~$ [00:00:06.346,313] <err> lte_lc: Sending AT%NCELLMEAS failed, error: 131589
    dl-sh:~$ [00:00:06.412,750] <inf> lwm2m_security: Requesting LTE and GNSS online
    dl-sh:~$ dl-sh:~$ [00:00:07.460,968] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 2
    dl-sh:~$ [00:00:08.019,317] <inf> lwm2m_security: Modem connection restored
    dl-sh:~$ [00:00:08.019,836] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 1
    dl-sh:~$ [00:00:08.021,270] <inf> app_lwm2m_client: LwM2M is connecting to server
    dl-sh:~$ [00:00:08.329,406] <inf> net_lwm2m_engine: Connected, sock id 1
    dl-sh:~$ dl-sh:~$ [00:00:08.661,499] <dbg> app_lwm2m_client: rd_client_event: Registration complete
    dl-sh:~$ [00:00:08.661,590] <inf> net_lwm2m_rd_client: Registration Done (EP='urn:imei:3594XXXXX130024')
    dl-sh:~$ [00:00:08.662,139] <inf> app_lwm2m_client: LwM2M is connected to server
    dl-sh:~$ [00:00:08.662,200] <inf> app_lwm2m_client: Obtained date-time from modem
    dl-sh:~$ dl-sh:~$
    dl-sh:~$
    dl-sh:~$
    dl-sh:~$ [00:00:44.931,396] <inf> lwm2m_rai: RAI enabled
    dl-sh:~$ [00:00:44.931,427] <dbg> app_lwm2m_client: rd_client_event: Queue mode RX window closed
    dl-sh:~$ [00:00:45.801,544] <inf> app_lwm2m_client: Send cell location request event
    dl-sh:~$ [00:00:45.801,666] <dbg> app_lwm2m: app_event_handler: Button 2 changed state to 1.
    dl-sh:~$ [00:00:45.805,145] <inf> net_lwm2m_message_handling: Send op to server (/dp)
    dl-sh:~$ [00:00:45.805,328] <dbg> app_lwm2m_client: rd_client_event: Registration update started
    dl-sh:~$ dl-sh:~$ [00:00:45.983,123] <dbg> app_lwm2m: app_event_handler: Button 2 changed state to 0.
    dl-sh:~$ [00:00:46.216,156] <inf> net_lwm2m_rd_client: Update callback (code:2.4)
    dl-sh:~$ [00:00:46.216,217] <dbg> app_lwm2m_client: rd_client_event: Registration update complete
    dl-sh:~$ [00:00:46.216,247] <inf> net_lwm2m_rd_client: Update Done
    dl-sh:~$ [00:00:46.303,222] <inf> net_lwm2m_message_handling: Send done!
    dl-sh:~$ [00:00:46.821,655] <err> net_lwm2m_obj_ground_fix: Ground Fix result Temporary error (1)
    dl-sh:~$ [00:00:46.824,676] <inf> lwm2m_rai: Ongoing traffic, RAI disabled
    dl-sh:~$ dl-sh:~$ [00:01:16.825,347] <inf> lwm2m_rai: RAI enabled
    dl-sh:~$ [00:01:16.825,378] <dbg> app_lwm2m_client: rd_client_event: Queue mode RX window closed
    dl-sh:~$ dl-sh:~$ [00:01:46.925,170] <dbg> app_lwm2m_client: rd_client_event: Registration update started
    dl-sh:~$ dl-sh:~$ [00:01:48.127,044] <inf> net_lwm2m_rd_client: Update callback (code:2.4)
    dl-sh:~$ [00:01:48.127,105] <dbg> app_lwm2m_client: rd_client_event: Registration update complete
    dl-sh:~$ [00:01:48.127,136] <inf> net_lwm2m_rd_client: Update Done
    dl-sh:~$ dl-sh:~$ [00:02:18.128,814] <dbg> app_lwm2m_client: rd_client_event: Queue mode RX window closed
    dl-sh:~$ dl-sh:~$ [00:02:46.924,255] <dbg> app_lwm2m_client: rd_client_event: Registration update started
    dl-sh:~$ dl-sh:~$ [00:02:48.256,317] <inf> net_lwm2m_rd_client: Update callback (code:2.4)
    dl-sh:~$ [00:02:48.256,378] <dbg> app_lwm2m_client: rd_client_event: Registration update complete
    dl-sh:~$ [00:02:48.256,408] <inf> net_lwm2m_rd_client: Update Done
    dl-sh:~$ dl-sh:~$ [00:03:17.068,267] <dbg> app_lwm2m_client: rd_client_event: Queue mode RX window closed
    dl-sh:~$ dl-sh:~$ [00:03:46.825,042] <err> net_lwm2m_obj_ground_fix: Ground Fix result No response (2)
    dl-sh:~$ [00:03:46.825,073] <err> net_lwm2m_location_assist: No response error in location services
    dl-sh:~$ dl-sh:~$

  • I tried 2 different locations (home and office), 2 SIM cards (Onomondo, Swisscom), both  connected to coiote backend via LTE-M - no cell based localisation working.

  • sdk and sample v3.1.0, created and built on Ubuntu 24.04 LTS

    dl-sh:~$ *** Booting nRF Connect SDK v3.1.0-6c6e5b32496e ***
    dl-sh:~$ *** Using Zephyr OS v4.1.99-1612683d4010 ***
    dl-sh:~$ [00:00:00.259,216] <inf> app_lwm2m_client: Run LWM2M client
    dl-sh:~$ [00:00:00.593,719] <inf> app_lwm2m_client: endpoint: urn:imei:359404230130024
    dl-sh:~$ [00:00:01.027,557] <inf> lwm2m_lte_notification: Registering ncell notification handler
    dl-sh:~$ [00:00:01.027,648] <inf> lwm2m_firmware: Image is confirmed OK
    dl-sh:~$ [00:00:01.027,648] <inf> app_lwm2m_client: Connecting to network.
    dl-sh:~$ [00:00:01.027,679] <inf> app_lwm2m_client: This may take several minutes.
    dl-sh:~$ dl-sh:~$ [00:00:03.380,798] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 2
    dl-sh:~$ dl-sh:~$ [00:00:04.831,298] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 1
    dl-sh:~$ [00:00:04.832,031] <inf> app_lwm2m_client: Connected to LTE network
    dl-sh:~$ [00:00:04.837,951] <inf> app_lwm2m_client: Client connect to server
    dl-sh:~$ [00:00:04.838,134] <inf> net_lwm2m_rd_client: Start LWM2M Client: urn:imei:359404230130024
    dl-sh:~$ [00:00:04.838,195] <inf> app_lwm2m_client: LwM2M is connecting to server
    dl-sh:~$ [00:00:04.838,500] <inf> net_lwm2m_rd_client: RD Client started with endpoint 'urn:imei:359404230130024' with client lifetime 43200 using server object 0
    dl-sh:~$ [00:00:05.114,593] <inf> lwm2m_security: Need to write credentials, requesting LTE and GNSS offline...
    dl-sh:~$ [00:00:05.152,374] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 0
    dl-sh:~$ [00:00:05.152,526] <inf> app_lwm2m_client: LwM2M is connecting to server
    dl-sh:~$ dl-sh:~$ [00:00:06.289,001] <err> lte_lc: Sending AT%NCELLMEAS failed, error: 131589
    dl-sh:~$ [00:00:06.355,438] <inf> lwm2m_security: Requesting LTE and GNSS online
    dl-sh:~$ dl-sh:~$ [00:00:07.421,356] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 2
    dl-sh:~$ [00:00:08.135,955] <inf> lwm2m_security: Modem connection restored
    dl-sh:~$ [00:00:08.136,505] <dbg> app_lwm2m_client: lwm2m_lte_reg_handler_notify: LTE NW status: 1
    dl-sh:~$ [00:00:08.137,725] <inf> app_lwm2m_client: LwM2M is connecting to server
    dl-sh:~$ dl-sh:~$ [00:00:08.509,033] <inf> net_lwm2m_engine: Connected, sock id 1
    dl-sh:~$ [00:00:08.835,388] <dbg> app_lwm2m_client: rd_client_event: Registration complete
    dl-sh:~$ [00:00:08.835,479] <inf> net_lwm2m_rd_client: Registration Done (EP='urn:imei:359404230130024')
    dl-sh:~$ [00:00:08.838,745] <inf> app_lwm2m_client: LwM2M is connected to server
    dl-sh:~$ [00:00:08.838,806] <inf> app_lwm2m_client: Obtained date-time from modem
    dl-sh:~$ dl-sh:~$ [00:00:35.028,442] <inf> app_lwm2m_client: Send cell location request event
    dl-sh:~$ [00:00:35.028,594] <dbg> app_lwm2m: app_event_handler: Button 2 changed state to 1.
    dl-sh:~$ [00:00:35.032,073] <inf> net_lwm2m_message_handling: Send op to server (/dp)
    dl-sh:~$ [00:00:35.189,697] <dbg> app_lwm2m: app_event_handler: Button 2 changed state to 0.
    dl-sh:~$ [00:00:35.390,869] <inf> net_lwm2m_message_handling: Send done!
    dl-sh:~$ dl-sh:~$ [00:00:37.108,062] <err> net_lwm2m_obj_ground_fix: Ground Fix result Temporary error (1)
    dl-sh:~$ dl-sh:~$ [00:01:07.109,924] <inf> lwm2m_rai: RAI enabled
    dl-sh:~$ [00:01:07.109,954] <dbg> app_lwm2m_client: rd_client_event: Queue mode RX window closed
    dl-sh:~$ dl-sh:~$ [00:01:09.023,376] <dbg> app_lwm2m_client: rd_client_event: Registration update started
    dl-sh:~$ [00:01:09.653,594] <inf> net_lwm2m_rd_client: Update callback (code:2.4)
    dl-sh:~$ [00:01:09.653,656] <dbg> app_lwm2m_client: rd_client_event: Registration update complete
    dl-sh:~$ [00:01:09.653,686] <inf> net_lwm2m_rd_client: Update Done
    dl-sh:~$ dl-sh:~$ [00:01:37.208,770] <dbg> app_lwm2m_client: rd_client_event: Registration update started
    dl-sh:~$ [00:01:38.094,787] <inf> net_lwm2m_rd_client: Update callback (code:2.4)
    dl-sh:~$ [00:01:38.094,848] <dbg> app_lwm2m_client: rd_client_event: Registration update complete
    dl-sh:~$ [00:01:38.094,879] <inf> net_lwm2m_rd_client: Update Done
    dl-sh:~$ dl-sh:~$ [00:01:51.635,894] <inf> app_lwm2m_client: Send cell location request event
    dl-sh:~$ [00:01:51.636,047] <dbg> app_lwm2m: app_event_handler: Button 2 changed state to 1.
    dl-sh:~$ [00:01:51.636,077] <err> net_lwm2m_location_assist: Temporary error in location services retry scheduled
    dl-sh:~$ [00:01:51.827,392] <dbg> app_lwm2m: app_event_handler: Button 2 changed state to 0.
    dl-sh:~$ dl-sh:~$ [00:02:07.320,709] <dbg> app_lwm2m_client: rd_client_event: Queue mode RX window closed
    dl-sh:~$ dl-sh:~$ [00:02:37.208,831] <dbg> app_lwm2m_client: rd_client_event: Registration update started
    dl-sh:~$ dl-sh:~$ [00:02:39.641,754] <inf> net_lwm2m_rd_client: Update callback (code:2.4)
    dl-sh:~$ [00:02:39.641,815] <dbg> app_lwm2m_client: rd_client_event: Registration update complete
    dl-sh:~$ [00:02:39.641,845] <inf> net_lwm2m_rd_client: Update Done
    dl-sh:~$ dl-sh:~$ [00:03:09.643,371] <dbg> app_lwm2m_client: rd_client_event: Queue mode RX window closed
    dl-sh:~$ dl-sh:~$ [00:03:37.108,642] <err> net_lwm2m_obj_ground_fix: Ground Fix result No response (2)
    dl-sh:~$ [00:03:37.108,673] <err> net_lwm2m_location_assist: No response error in location services
    dl-sh:~$ dl-sh:~$ [00:10:06.365,478] <inf> net_lwm2m_obj_signal_meas_info: Updating information for 0 neighbouring cells
    dl-sh:~$ [00:10:06.366,943] <dbg> app_lwm2m_client: rd_client_event: Registration update started
    dl-sh:~$ dl-sh:~$ [00:10:07.600,616] <inf> net_lwm2m_rd_client: Update callback (code:2.4)
    dl-sh:~$ [00:10:07.600,677] <dbg> app_lwm2m_client: rd_client_event: Registration update complete
    dl-sh:~$ [00:10:07.600,738] <inf> net_lwm2m_rd_client: Update Done
    dl-sh:~$ dl-sh:~$ [00:10:37.602,355] <dbg> app_lwm2m_client: rd_client_event: Queue mode RX window closed
    dl-sh:~$ dl-sh:~$ app gfix
    Send cell location request

    dl-sh:~$ [00:16:57.384,399] <err> net_lwm2m_location_assist: Temporary error in location services retry scheduled

  • Oh man, I could resolve the issue with ChatGPTs expertise - the nrf Cloud evaluation  key stored in Coiote was older then 30 days... Thats a thing which could go into the FAQs...

Related