I'm having 52840-DK boards 3 and installed vscode,nrfsdk v2.2.0 and v2.8.0. i want to explore how to use FOTA for zigbee. are there any sample available to make it work and explore.
I'm having 52840-DK boards 3 and installed vscode,nrfsdk v2.2.0 and v2.8.0. i want to explore how to use FOTA for zigbee. are there any sample available to make it work and explore.
Hi,
Please use NCS v2.9.0 and install Zigbee R23 add-on. You can start from the Zigbee: Light switch, which supports Zigbee FOTA for nRF52840.
Regards,
Amanda H.
Can you please help me with procedure,how can we make the sample work for FOTA. i seen light_switch code alone has FOTA implementation. what about the server. which sample we can use as server,or we need to make any modifications? it will be great help,if you can give little more procedure of this. for example if i flash light_switch example in one nrf52840-dk board, what about other board.
The OTA Upgrade Server can be either a standalone third-party device or it can be instantiated on an nRF52840 DK using nRF Util’s DFU over Zigbee procedure. See Zigbee FOTA doc and this post.
The OTA Upgrade Server can be either a standalone third-party device or it can be instantiated on an nRF52840 DK using nRF Util’s DFU over Zigbee procedure. See Zigbee FOTA doc and this post.
I installed NCS v2.9.0 like mentioned in this link install Zigbee R23 add-on. When i try to build the code, i am getting the below errors. Could you help me to solve this error?
C:/ncs/workspace/ncs-zigbee/subsys/lib/zigbee_fota/src/dfu_multi_target.c:74:25: error: 'CONFIG_UPDATEABLE_IMAGE_NUMBER' undeclared (first use in this function); did you mean 'CONFIG_MCUBOOT_MCUBOOT_I
MAGE_NUMBER'?
74 | if (image_id >= CONFIG_UPDATEABLE_IMAGE_NUMBER) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| CONFIG_MCUBOOT_MCUBOOT_IMAGE_NUMBER
C:/ncs/workspace/ncs-zigbee/subsys/lib/zigbee_fota/src/dfu_multi_target.c:74:25: note: each undeclared identifier is reported only once for each function it appears in
C:/ncs/workspace/ncs-zigbee/subsys/lib/zigbee_fota/src/dfu_multi_target.c: In function 'dfu_multi_target_get_version':
C:/ncs/workspace/ncs-zigbee/subsys/lib/zigbee_fota/src/dfu_multi_target.c:133:41: error: 'PM_MCUBOOT_PRIMARY_ID' undeclared (first use in this function)
133 | int err = boot_read_bank_header(PM_MCUBOOT_PRIMARY_ID,
| ^~~~~~~~~~~~~~~~~~~~~
[290/432] Building C object modules/nrf/lib/multithreading_lock/CMakeFiles/..__nrf__lib__multith[291/432] Building C object modules/nrf/lib/fatal_error/CMakeFiles/..__nrf__lib__fatal_error.dir[294/432] Building C object modules/nrf/lib/dk_buttons_and_leds/CMakeFiles/..__nrf__lib__dk_butt[295/432] Building C object modules/nrf/subsys/nrf_security/src/zephyr/CMakeFiles/mbedtls_zephyr[297/432] Building C object modules/ncs-zigbee/subsys/lib/zigbee_app_utils/CMakeFiles/..__ncs-zi[298/432] Linking C static library modules\ncs-zigbee\lib\zboss\src\libzboss-sources.a
ninja: build stopped: subcommand failed.
FAILED: _sysbuild/sysbuild/images/light_switch-prefix/src/light_switch-stamp/light_switch-build C:/ncs/workspace/ncs-zigbee/samples/light_switch/build/_sysbuild/sysbuild/images/light_switch-prefix/src
/light_switch-stamp/light_switch-build
cmd.exe /C "cd /D C:\ncs\workspace\ncs-zigbee\samples\light_switch\build\light_switch && C:\ncs\toolchains\b620d30767\opt\bin\cmake.exe --build ."
ninja: build stopped: subcommand failed.
FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\b620d30767\opt\bin\cmake.EXE' --build C:/ncs/workspace/ncs-zigbee/samples/light_switch/build
Hi,
How do you enable the Zigbee FOTA? Could you refer to the activating optional extensions section?
Regards,
Amanda H.
Thank you for the information. With this build configuration, I was able to successfully build the Zigbee client code without any errors. However, I’m unable to find the Zigbee server code for the nRF5 SDK. Could you please share the link to the server code if available?
Initially, we would like to experiment using a PC tool as the Zigbee server. Is there any Zigbee PC tool available from Nordic for this purpose?