Hi,
I have made a custom board with BL5340PA module from Ezurio and i try to test simple bluetooth advertisement code but i have this error and not able to see my bluetooth :
SEGGER J-Link V8.18 - Real time terminal output SEGGER J-Link (unknown) V1.0, SN=1050024622 Process: JLink.exe [00:00:00.000,396] <dbg> os: setup_thread_stack: stack 0x20003b08 for thread [00:00:00.000,671] <dbg> clock_control: clkstarted_handle: hfclk: Clock started 0x20000c08: obj_size=2048 buf_start=0x20003b08 buf_size 2048 stack_ptr=0x20004308 [00:00:00.001,251] <dbg> bl5340pa_dvk_cpuapp: remoteproc_mgr_boot: Network MCU released. [00:00:00.001,586] <dbg> bt_hci_core: bt_hci_driver_register: Registered IPC [00:00:00.032,531] <dbg> clock_control: z_nrf_clock_calibration_done_handler: Calibration done. [00:00:00.502,014] <err> pca953x: tca9538@70 init failed: -5 *** Booting nRF Connect SDK v2.7.0-d8bc5118e3ef *** *** Using Zephyr OS v3.6.99-d60cc29d371a *** [00:00:00.502,593] <dbg> os: k_sched_unlock: scheduler unlocked (0x20000b88:0) [00:00:00.502,899] <inf> Lesson2_Exercise1: Starting Lesson 2 - Exercise 1
Thanks
