环境搭建

[wt1]

在进行对协议栈烧写时error - cannot create command input file '..\..\..\..\..\..\components\softdevice\s140\hex\main.__i'出现这个问题，当我把这个文件的权限改写以后"..\..\..\..\..\..\components\softdevice\s140\hex\s140_nrf52_7.2.0_softdevice.hex" - 1 Error(s), 0 Warning(s).这个文件又不行了，导致无法进行下一步，nrf52833_xxaa在进行录的时候一直提醒没有j-link驱动，请问这个调试器是必备硬件之一吗，我是一个刚接触蓝牙版块的小白，请各位大佬赐教，如果有大佬用vs code做这个板子开发的话也可以指教一下我，谢谢你们，跪求大佬指导

[Simonr]

Hi

What version of the SEGGER Embedded Studios (SES) have you downloaded and have started working on? The nRF5 SDK v 17.1.0 was tested and verified with SES v5.42a, so if you have another version than this one I strongly recommend you move to the tried and tested SES version. Unfortunately I'm not aware of a cc1 or ccl file being necessary.

Best regards,

Simon

[wt1]

Hello,The version I'm currently using is 7.32a. Are you suggesting that I switch to version 5.42a? Thank you very much for your help, and wish you a pleasant life.

[Simonr]

Yes, correct. v5.42a was the last version we did extensive testing/verification for, and if I recall correctly there has been issues with newer versions of SES and the nRF5 SDK.

Best regards,

Simon

[wt1]

Hello,Do I need to download any other toolchains besides the nRF5 SDK when developing NFC with this board? When developing NFC, I found that several header files cannot be found, and I still can't find them even after re-downloading the SDK on another computer.