Thingy 91X MFF2 UICC.

[andychess]

Hi,

I have been working through the Dev Academy cellular course using the nRF9151 DK which is fitted with a 1NCE MFF2 eSIM.  I was able to set this up in the Board Configurator and it works fine.

I recently received a Thingy 91X and have also fitted an eSIM to the MFF2 footprint.  Please can you confirm if any other steps are required to activate the eSIM, since there is no Board Configurator available for it.

Many thanks in advance.

Andy

[dejans]

Hi Andy,

Please can you confirm if any other steps are required to activate the eSIM, since there is no Board Configurator available for it.

This should be automatic as long as there is no SIM card inserted into the nano slot.

Best regards,
Dejan

[andychess]

Thank you Dejan and sorry for the delay getting back to you.  I did notice that eventually but thought the question might help someone else.

[dejans]

Hi Andy, 

Thank you for your reply.

Can I consider the issue resolved and close this ticket?

Best regards,
Dejan

[andychess]

Yes.  Thanks again Dejan:-).