nRF5340 PDM frequency max and min?

[Poki Huang]

Hi 

What is the nRF5340 PDM frequency max and min can be set?

Because below is our microphone frequency spec., we want to set PDM frequency into like between 450~850KHz

Thank you

Poki

[Asbjørn]

Hello Poki,

• The nRF5340 supports Pulse Density Modulation (PDM) and can generate the PDM clock. However, based on the information provided in the nRF5340 Product Specification and nRFx PDM HAL, the maximum PDM clock frequency supported is 1.333 MHz. 
• The nRF5340 supports a selectable ratio of 64 or 80 between PDM_CLK and output sample rate as per the PDM Product Specification. However, given the maximum PDM clock frequency of 1.333 MHz, the maximum achievable sampling rate would be approximately 20.8 kHz (1.333 MHz / 64) 
• The amount of RAM and flash required to store 80 kHz data for 1 second would depend on the bit depth of the data. For example, if each sample is 16 bits (2 bytes), you would need approximately 160 KB of memory (80,000 samples/second * 2 bytes/sample) to store 1 second of data

  This is a copy of the answers supplied in the DevZone ticket here, but still valid in your case:  Maximum PDM clock frequency supported by nRF5340 

  Best regards

  Asbjørn 

[Poki Huang]

Hi Asbjorn:

Thanks feedback

So what is the min PDM frequency?

Poki

[Asbjørn]

Hello Poki,

These are the valid frequencies you can select from. nRF5340 product specification here: https://docs.nordicsemi.com/bundle/ps_nrf5340/page/pdm.html#ariaid-title24

Best regards

Asbjørn

[Poki Huang]

Hi Asbjorn:

So you mean we can only setting PDM frequency with below 6 value? (1.000MHZ/1.032MHZ/1.067MHz/1.231MHZ/1.28MHz/1.333MHz)

nRF5340 only mention PDM sample rate 16KHz, what the min. & max, sample rate we can choose?

Can we tune this sample rate to other value like 15KHz, with ratio 64 to get 15KHz*64=960KHz frequency to use?

Thank you

Poki

[Poki Huang]

Hi Asbjorn:

So you mean we can only setting PDM frequency with below 6 value? (1.000MHZ/1.032MHZ/1.067MHz/1.231MHZ/1.28MHz/1.333MHz)

nRF5340 only mention PDM sample rate 16KHz, what the min. & max, sample rate we can choose?

Can we tune this sample rate to other value like 15KHz, with ratio 64 to get 15KHz*64=~960KHz frequency to use?

Since we can really tune sample rate to 15KHz and get ~960KHz as below pic.

 

Thank you

Poki