Hello,
I am following this course: https://academy.nordicsemi.com/courses/bluetooth-low-energy-fundamentals/lessons/lesson-3-bluetooth-le-connections/topic/blefund-lesson-3-exercise-2/ but when I get to step 7. Set our preferred PHY then I am running into this assert:
*** Booting nRF Connect SDK v3.2.1-d8887f6f32df ***
*** Using Zephyr OS v4.2.99-ec78104f1569 ***
Bluetooth initialized
Advertising successfully started
Connected
Connection parameters: interval 48.75 ms, latency 0 intervals, timeout 5000 ms
ASSERTION FAIL [err == 0] @ WEST_TOPDIR/zephyr/subsys/bluetooth/host/hci_core.c:504
Controller unresponsive, command opcode 0x2032 timeout with err -11
r0/a1: 0x00000003 r1/a2: 0x00000000 r2/a3: 0x00000001
r3/a4: 0x00000003 r12/ip: 0x00000000 r14/lr: 0x00010801
xpsr: 0x21000000
s[ 0]: 0x00000000 s[ 1]: 0x0000ec4f s[ 2]: 0x00020000 s[ 3]: 0x0000ec11
s[ 4]: 0x00000000 s[ 5]: 0x00000000 s[ 6]: 0x00000000 s[ 7]: 0x2000788c
s[ 8]: 0x00000000 s[ 9]: 0x0001c281 s[10]: 0x00021faf s[11]: 0x20003fac
s[12]: 0xfffffff5 s[13]: 0x00010801 s[14]: 0x00021faf s[15]: 0x00002032
fpscr: 0xfffffff5
Faulting instruction address (r15/pc): 0x00010810
I have the U-Blox NINA B302 module, inside is the nRF52840.
Any advice would be much appreciated!
Best regards
