We are using the nRF9151 with modem firmware v2.0.4 and would like to perform TX RF testing on NTN bands 255 and 256.
TX RF testing is currently initiated using the modem RF test AT command in TX mode, for example:
AT%XRFTEST=1,1,<band>,<frequency>,18,0,4,0,0,0,1,0,0
Where:
-
<band> is set to the NTN band under test (255 or 256)
-
<frequency> is set to the corresponding TX test frequency
Please confirm whether bands 255 and 256 are supported for TX RF testing via this AT command in modem firmware v2.0.4. If not, is there an alternative recommended method for performing TX validation on these NTN bands, or is support planned for a future release?
