can't find board nrf52833dk_nrf5283 in bluetooth DTM sample

[christopheMon]

Hello,

I have a project in Visual studio code and Nrf connect.

MCU is a NRF 52833.

For the certicications, the lab request me the DTM mode.

I tried the use the Sample - Direct-test-mode Firmware

However I'm not able to find eht board "nrf52833dk_nrf5283" in the NCS folder.

I tried to install several SDKs (2.2.0 / 2.3.0 / 2.4.2 / 2.7.0 / 2.9.2 / 3.2.4 ) but none includes the 833 board. I can find and compile with the 840, but no options for the 833.

Please can sombody help me ? I need to use and compile the DTM for the 52833.

Thanks in advance

[Kenneth]

Hi,

If you choose Nordic Kits you can build for nRF52833dk like this:

But I assume you are not using direction finding, so you need to disable it by either adding to app.overlay:

&radio {
	/delete-property/ dfe-supported;
};

Or build as described here: 
https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/bluetooth/direct_test_mode/README.html#disabling_direction_finding_feature 

Kenneth

[christopheMon]

hello, thanks for your reply, however, with the Nordic Kit selection, (and not the Compatible), impossible to compile the code...

I can compile selecting the nRF52840 only...

how to get just a simple code for DTM for the 833 ?

Also don't you have example with the USB communication ?

I can't understant how all people using nrf devices have to certificate them then every body have to use the DTM too... nothing is proposed for this ? I mean PC software - USB control and DTM for most nrf devices ?

So in my case, I need to create a new board to use with the DTM as the 52833 is not available...right ?

[Kenneth]

Hello,

If you follow the description it will also compile for the nRF52833DK.

Reason for not having USB interface for the DTM is that it's not part of the DTM specification as defined by Bluetooth.

Based on your description I get the impression that you might not be looking for DTM, but you actually want to use radio test example instead. You can find a description here on how to use for instance radio test example as basis for regulatory testing at a test house:
Example code for fixed frequency for CE certification 

DTM is mostly used for verifying compliance with Bluetooth specifications.

Kenneth

[christopheMon]

Hi,

I need for the certifications: 

The devices must include a Direct Test Mode (DTM) allowing:
• Selection of TX and RX modes
• Selection of BLE channels:
o Lowest channel
o Middle channel
o Highest channel
• Continuous transmission with duty cycle ≥ 98%
• Transmission at maximum power
• PRBS9 modulation
• Standalone operation, without dependence on the mobile application
The laboratory must be able to control the product in test mode without a final user interface.

what should I use then ? for my 52833 ?

[Kenneth]

All this can be done using:
https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/peripheral/radio_test/README.html#user_interface 

The advantage using radio test over DTM, is that radio test have human readable interface.

Kenneth

[christopheMon]

interesting, but I m sorry, I m not a specialist about this, and again, the example is only for the 52840. 

Now I m totally lost how to provide a PCB with the only simple requested commands.

What will be the simplest way ? radio test or DTM ?

also, I tried long time to compile the DTM exanple for a 52833. Now it is compiling, but no TxD messages outputs.

(It's now complicate... I remember several years ago with Keil it was really easier)

direct_test_modeCMO.zip 

Here is my code, what do I wrong ?

[Kenneth]

You are not writing what version of nRF Connect SDK you are working on, but please follow the description I provided initially. I would claim 99% of applications are not doing direction finding, so please disable it as suggested in the DTM documentation for the specific nRF Connect SDK you are working on or by following the description I provided initially.

That said, I recommend using radio test for the purpose (not DTM). I can see from the description you provided it's written "a Direct Test Mode", it's not written "the Direct Test Mode". "a Direct Test Mode" can be the suggested radio test I already linked to:
https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/peripheral/radio_test/README.html 

Kenneth