continuous carrier wave output & channel signal value monitoring

[joey]

HI，

I am currently conducting secondary development based on the periodic_adv_conn sample in the ncs 3.2.1 SDK. Now I want to add continuous carrier wave output and continuous channel signal value monitoring to the code. How should I implement these features?

Thanks!

[Simonr]

Hi

Can you explain what exactly you want to do here? What is the end goal of your application? It doesn't make sense to me to implement a continuous carrier wave or a continuous scanner in periodic advertising. Do you want to add this after connection on the peripheral and central side of your application?

The Direct Test mode sample should be able to do both a continuous carrier wave and continuous scanning/monitoring, so that can be used for reference. Or do you have a more specific use case in mind?

Best regards,

Simon

[joey]

I want to use continuous channel listening to test the interference conditions of surrounding channels, and continuous carrier output to test the output performance of the module. This function enables the node to switch from the PAWR state to one of these two modes upon receiving a command.

[Simonr]

Hi

I don't understand what you refer to as "this function" here, but I still think what we have in the SDK is the Direct Test Mode sample, so you can use that for reference and add the needed functionality to your project using that as reference.

Best regards,

Simon