RTC1 Initialisation with soft device

[Krishna]

I am building my application up on the blinky free rtos. I want to use RTC and ble stack. i am initialising RTC1 first and ble stack stact.

The problem is that I am getting 0x1001 error code (which stands for "Incorrect interrupt configuration") from softdevice_handler_init() if I initialize soft device after the nrf_drv_rtc_init().

I didn't face any problem with the nRF5_SDK_11.0.0-2.alpha_bc3f6a0, problem is coming with nRF5_SDK_11.0.0_89a8197 only.

Thanks in advance!

[Krishna]

We are using FreeRTOS, BLESTACK and RTC.

FreeRTOS uses SystemCore Clock,RTC0 is blocked by the Soft-device.

We are trying to use RTC1/RTC2 for tick events. When we try to enable the tick event for RTC1 or RTC2 we are getting below shown error. Below Error was displayed by enabling DEBUG.

ID=4097 pc=121272 info=2048,

I am assigning RTC2_CONFIG_IRQ_PRIORITY

[Krishna]

Sorry SysTick, I am using nrF52.

RTC2_CONFIG_IRQ_PRIORITY has low priority. It defined in nrf_drv_config.h