GPIO Leakage current on nRF54LM20

[maximevince]

We're dimensioning the pullup resistors for the lowest possible standby current in system-OFF, but we cannot find any leakage current spec in the nRF54LM20 PS / datasheet.

Please help us figuring this out.

Thanks 

[Kenneth]

Hello,

That is simply because the input impedance is so high that you will not be able to measure it. You can find that we have some internal configurable pull up/downs that you can enable on the pins, and enabling them have no effect on the power consumption (I believe they are around 14kohm).

Kenneth

[maximevince]

Thanks, but that's not the information I am looking for.
I am using external pullups, for good EE reasons. I do not want to use the internal pullups.
I want to know the leakage current spec for the nRF54LM20 GPIOs, just like Nordic (and many other MCU manufacturers) also publishes these for their other MCUs. 

[Kenneth]

I can put in an internal request, this may take some time though if it needs simulations.

Kenneth

[maximevince]

Thank you, much appreciated.