Need to download the latest nRF Connect and nRF for Desktop to connect to the nRF54L15-DK

[Medchip]

Windows x654 is OS

I have purchased the 2 boards nRF54L15-DK

I have not downloaded the correct nRF Connect for Desktop or the nRF Connect for VS Code

I have an older nRF5340 - DK and it worked with nRF Connect for Desktop and the nRF Connect for VS Code

My nRF54L15-DK board does not seem to be connecting

[Samruddhi Jadhav]

Hi Jonathan,

Can you please confirm which versions of nRF Connect for Desktop and nRF Connect for VS Code you are using? The latest version for nRF Connect for Desktop can be downloaded here: https://www.nordicsemi.com/Products/Development-tools/nRF-Connect-for-Desktop/Download

Also, have you tried using a different USB cable, USB Hub and made sure that you are using the correct USB port on the DK? Please note that the latest SEGGER J-Link version is also necessary for nRF Connect for Desktop. Have you checked this?

I would also recommend you to take a look at the following Get Started documentation: https://docs.nordicsemi.com/r/bundle/nrf-connect-for-desktop/page/get-started

Please let us know if you have any further questions.

Best Regards,

Samruddhi

[Medchip]

nRF Connect for Desktop - 5.3.2

nRF Connect for VS Code - VSCodeUserSetup-x64-1.127.0

Segger J-Link Version - VSCodeUserSetup-x64-1.127.0

Using the ONLY USB-3.0 connector on the board and the LED comes up blinking

I am confused about this page - where Windows is NOT supported.

And here is my device manager where I thought I could see the board

Any help is appreciated

Thank you

[Samruddhi Jadhav]

Hi Jonathan,

Can you please try the following in CLI: nrfutil device list
You can try with nrfutil device version 2.19.3

Best Regards,

Samruddhi