Hello, I have a problem NRF905. Sending distance is 0-30 cm maximum. I want to ask if the defective product or it may be due code? TX RX uses the base code of the library.
Hello, I have a problem NRF905. Sending distance is 0-30 cm maximum. I want to ask if the defective product or it may be due code? TX RX uses the base code of the library.
Hi, Can you share the schematic of the module, and the voltage on all the wires? I have a feeling there is some poor grounding here.
Connect Arduino UNO
VCC = 3,3V CE = DIGITAL PIN 4 CLK = unconnected, I did not know where AM = DIGITAL PIN 9 MISO = DIGITAL PIN 12 SCK = DIGITAL PIN 13 GND = GND
TXE = DIGITAL PIN 5 PWR = DIGITAL PIN 3 CD = DIGITAL PIN 7 DR = DIGITAL PIN 8 MOSI = DIGITAL PIN 11 CSN = DIGITAL PIN 10 GND = GND
both Arduino UNO involved as well.
I used a basic version code. Nothing I have not changed. Within one Arduina recorded RX and TX to another arduino. Im used example code.
Still my suggestion is to look into improving the connection between the boards. You might consider short the wires and solder them to the module. Is there any activity on the wires continuously, or only serial communication in-between radio transactions?