• State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 63 subscribers
  • Views 4560 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 113505
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sniffer not working PCA10000-PCA10001

hakki goceoglu

I have been trying nrf-sniffer with no success. Setup is:

Win7 64, Sniffer Win 1.0.1, Wireshark 1.10.14 (both win32 and 64 tried), PCA10000 and PCA10001

The sniffer program sees pca10000 (or pca10001) but no packets are captured. I also tried the same setup with a pca10028 it works perfectly.

Thanks in advance, Regards

Hakki

Edit:

No packets in neither of them, also some devices are missing image description image description

Parents
  • 0

    Hi Hakki,

    The screenshot showed the advertising packets are captured as you can see the entries in devices available.

    So the issue here is the streaming of data from the sniffer console to wireshark.

    Have you installed the Nordic Plugin ? Do you have Wireshark in the default folder/path ? Could you test with a device advertising in low interval. From the screenshot seems that you have 3 beacons ?

Reply
  • 0

    Hi Hakki,

    The screenshot showed the advertising packets are captured as you can see the entries in devices available.

    So the issue here is the streaming of data from the sniffer console to wireshark.

    Have you installed the Nordic Plugin ? Do you have Wireshark in the default folder/path ? Could you test with a device advertising in low interval. From the screenshot seems that you have 3 beacons ?

Children
No Data
Related