• State Not Answered
  • Replies 4 replies
  • Subscribers 64 subscribers
  • Views 3035 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 101438
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

NRF24LE1-STARTING ISSUE

song sreedhar

i have purchased one of the modules. i need to interface with other modules of the same kind but how will i start programming it ,can u people suggest me the IDE ? do i need a development kit?how will i program the module ? all sort of ways ?

Parents
  • 0

    Hi

    From a hardware standpoint it is possible to shift the voltage of an existing 5V solution down to 3.6V, but that will not solve the main issue which is the software support. The 8051 MCU in the nRF24LE1 is quite different to other 8051 MCU's out there, and the programming procedure will also be different.

    There are some un-official third party solutions that might be cheaper, like this one, which will be much easier than trying to hack your own solution: www.ebay.com/.../271164903768

    Please be aware that Nordic can't promise any support for these types of un-official programming solutions ;)

    Best regards Torbjørn

Reply
  • 0

    Hi

    From a hardware standpoint it is possible to shift the voltage of an existing 5V solution down to 3.6V, but that will not solve the main issue which is the software support. The 8051 MCU in the nRF24LE1 is quite different to other 8051 MCU's out there, and the programming procedure will also be different.

    There are some un-official third party solutions that might be cheaper, like this one, which will be much easier than trying to hack your own solution: www.ebay.com/.../271164903768

    Please be aware that Nordic can't promise any support for these types of un-official programming solutions ;)

    Best regards Torbjørn

Children
No Data
Related