• State Not Answered
  • Replies 25 replies
  • Subscribers 62 subscribers
  • Views 21136 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 114521
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

JLink Info: Could not power-up debug power domain.

Inspectron

image descriptionHi all,

until now, I used nRF51 Chips on my board. I programed them trough the nRF51DK(PCA10028). But now I would like to work with nRF52832 Chip. I have a nRF52DK(PCA10040) and an application which is working fine on the 52DK.The application is based on peripheral examples from SDK 11. SD is not used. But when I try to download the same application on my own board with the nRF52832 Chip, will get this error:

  • JLink Info: Found SWD-DP with ID 0x2BA01477
  • JLink Info: Could not power-up debug power domain.
  • JLink Info: Found SWD-DP with ID 0x2BA01477
  • JLink Error: Communication timed out: Requested 20 bytes, received 0 bytes ! Could not transfer JTAG data. DAP error while reading DP-Ctrl-Stat register.

Error: Flash Download failed - Target DLL has been cancelled.

What means: Could not power-up debug power domain? How can I fix this error?

If I want to program the nRF52832 Chip is it possible to use the Segger from the 51DK, or do I have to use the segger from DK52?

Do I have to use an external crystal for programing the chip? Because I would like to work only with the internal RC oscilator.

Voltbox_Classic 1.0 BRD.pdfVoltbox_Classic 1.0 SCH.pdf

image description

This is what I get when I want hwinfo over jlink commander

image description

image description

image description image description image description

Parents
  • 0

    Do we need a special power on reset? We do get sometimes the processor get up running and then we also can reprogram it. Most times it does not come up.

    Mr. Papp recommandet that we connect the external 3.2 V to our board, which we did. Whit this input we could program it the first time.

    Can we do something like a power on reset hardware to start our program correctly?

Reply
  • 0

    Do we need a special power on reset? We do get sometimes the processor get up running and then we also can reprogram it. Most times it does not come up.

    Mr. Papp recommandet that we connect the external 3.2 V to our board, which we did. Whit this input we could program it the first time.

    Can we do something like a power on reset hardware to start our program correctly?

Children
No Data
Related

core_v2_widget.Hide()