The basic Problem - directed broadcast

[Sriun]

case BLE_ADV_EVT_PEER_ADDR_REQUEST:
{
    ble_gap_addr_t  peer_address;
    peer_address.addr_type  =   BLE_GAP_ADDR_TYPE_RANDOM_STATIC;            
    peer_address.addr[5] = 0xf0;
    peer_address.addr[4] = 0x1b;
    peer_address.addr[3] = 0x6c;
    peer_address.addr[2] = 0x56;
    peer_address.addr[1] = 0xbe;
    peer_address.addr[0] = 0x01;
    err_code = ble_advertising_peer_addr_reply(&peer_address);
    APP_ERROR_CHECK(err_code);
}
break;

options.ble_adv_directed_enabled =  BLE_ADV_DIRECTED_ENABLED;
options.ble_adv_directed_slow_enabled    = BLE_ADV_DIRECTED_SLOW_ENABLED;
options.ble_adv_directed_slow_interval = APP_ADV_DIRECTED_INTERVAL;
options.ble_adv_directed_slow_timeout  =    APP_ADV_DIRECTED_TIMEOUT_IN_SECONDS;

err_code = ble_advertising_start(BLE_ADV_MODE_DIRECTED);

I am so configured, why don't mobile search to the device?

[tesc]

Hi,

You should check two things.

First, check that the byte ordering of the address is correct. addr[0] should be the least significant byte, and addr[5] should be the most significant byte. Is the address you see in the InitA field of the log correct? (Byte ordering is confusing, so it may be wrong byte ordering.)

Second, check that the address type is correct. You have chosen BLE_GAP_ADDR_TYPE_RANDOM_STATIC but the correct type may be another type. See GAP Address types.

If the phone is made by Pulsate Mobile Ltd. (company ID 0x01BE) then the address should probably be reversed and be of type BLE_GAP_ADDR_TYPE_PUBLIC. Public addresses uses the registered company ID for the two most significant bytes, see bluetooth.org for a list of company IDs.

Regards, Terje

[Sriun]

Thank you very much ,However, the problem is not resolved, the phone still can't search for Bluetooth devices.