Hi
I tried to flash the softdevice with nrfprog, but it does not work. Even with nRFgoStudio it does not work.But with IAR I can program an example of the SDK (without softdevice).
The log file:
nrfjprog.exe --family NRF52 --program s132_nrf52_2.0.0_softdevice.hex --chiperase --verify --log
nrfjprog verion 8.0.0
--------------------------------------------------------------------------------
FUNCTION: open_dll.
FUNCTION: open_dll.
FUNCTION: dll_version.
FUNCTION: enum_emu_snr.
FUNCTION: enum_emu_snr.
FUNCTION: enum_emu_snr.
FUNCTION: enum_emu_snr.
FUNCTION: connect_to_emu_without_snr.
FUNCTION: connect_to_emu_without_snr.
FUNCTION: enum_emu_snr.
Device "NRF52832_XXAA" selected.
FUNCTION: read_device_version.
FUNCTION: read_device_version.
Found SWD-DP with ID 0x2BA01476
Found Cortex-M4 r0p1, Little endian.
FPUnit: 6 code (BP) slots and 2 literal slots
CoreSight components:
ROMTbl 0 @ E00FF000
ROMTbl 0 [0]: FFF0F000, CID: B105E00D, PID: 000BB00C SCS
ROMTbl 0 [1]: FFF02000, CID: B105E00D, PID: 003BB002 DWT
ROMTbl 0 [2]: FFF03000, CID: B105E00D, PID: 002BB003 FPB
ROMTbl 0 [3]: FFF01000, CID: B105E00D, PID: 003BB001 ITM
ROMTbl 0 [4]: FFF41000, CID: B105900D, PID: 000BB9A1 TPIU
ROMTbl 0 [5]: FFF42000, CID: B105900D, PID: 000BB925 ETM
FUNCTION: readback_status.
FUNCTION: readback_status.
FUNCTION: read_region_0_size_and_source.
FUNCTION: read_region_0_size_and_source.
FUNCTION: erase_all.
FUNCTION: erase_all.
FUNCTION: sys_reset.
FUNCTION: sys_reset.
FUNCTION: read_region_0_size_and_source.
FUNCTION: read_region_0_size_and_source.
FUNCTION: disable_bprot.
FUNCTION: disable_bprot.
FUNCTION: power_ram_all.
FUNCTION: power_ram_all.
FUNCTION: write.
FUNCTION: write.
JLinkARM.dll WriteMem returned error -1.
FUNCTION: close_dll.
FUNCTION: close_dll.
I'm using the nrf52 module of Taiyo Yuden and j-link. What I am doing wrong?
Thanks in advance. Best regards
