• State Verified Answer
  • Replies 3 replies
  • Subscribers 64 subscribers
  • Views 2026 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 101513
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

Dynamic updating of serial number in device ID

Chris Gates

Ole, I am trying to update the serial number value in an already initialized standard Device ID profile. [i]dis_init.serial_num_str.length = (uint16_t)strlen(newserial); dis_init.serial_num_str.p_str = (uint8_t *)newserial; err_code = ble_dis_update(&dis_init);[/i]

and this [i]uint32_t ble_dis_update(const ble_dis_init_t * p_dis_init){ uint32_t err_code;

if (p_dis_init->serial_num_str.length > 0) {
    err_code = char_add(BLE_UUID_SERIAL_NUMBER_STRING_CHAR,
                        p_dis_init->serial_num_str.p_str, 
                        p_dis_init->serial_num_str.length,
                        &p_dis_init->dis_attr_md,
                        &serial_num_handles);
    if (err_code != NRF_SUCCESS) {
        return err_code;
    }
}
return NRF_SUCCESS;

}[/i] And while nothing throws an error, it also doesn't update the value. Any ideas?

Another option I have here is to use a soft reset to start the system over again, and I may have a use for that anyway, so I have search through a the documentation but I cant seem to find a way to force a reset. Is inline with a jump to the reset vector the only way, or is there something a little more elegant?

Parents
  • 0

    I'm having a little trouble understanding this code snippet. To update an existing characteristic, you should make sure to use sd_ble_gatts_value_set(), which require you to have the handle of the characteristic you want to set. Without having tested, I'd therefore suggest a method something like this

    
uint32_t ble_dis_serial_num_update(char * serial_num_string, uint8_t length)
{
    return sd_ble_gatts_value_set(serial_num_handles.value_handle, 0, length, serial_num_string);
}

    Also, you should be aware that you can't add a characteristic to a service if other services have been added in the mean time. Any attribute added will always be added to the last service added, no matter what you set the service_handle to in the sd_ble_gatts_characteristic_add() function. This is a limitation with the current GATT Table implementation in the S110.

    Edit: To also answer the second part, you can use NVIC_SystemReset() or sd_nvic_SystemReset(), depending on whether the softdevice is enabled or not.

Reply
  • 0

    I'm having a little trouble understanding this code snippet. To update an existing characteristic, you should make sure to use sd_ble_gatts_value_set(), which require you to have the handle of the characteristic you want to set. Without having tested, I'd therefore suggest a method something like this

    
uint32_t ble_dis_serial_num_update(char * serial_num_string, uint8_t length)
{
    return sd_ble_gatts_value_set(serial_num_handles.value_handle, 0, length, serial_num_string);
}

    Also, you should be aware that you can't add a characteristic to a service if other services have been added in the mean time. Any attribute added will always be added to the last service added, no matter what you set the service_handle to in the sd_ble_gatts_characteristic_add() function. This is a limitation with the current GATT Table implementation in the S110.

    Edit: To also answer the second part, you can use NVIC_SystemReset() or sd_nvic_SystemReset(), depending on whether the softdevice is enabled or not.

Children
No Data
Related