Unique Device ID

[Dave]

I have a radio board using a NRF51822 with a custom radio protocol. I need a unique identifier, ideally 24bit, 32bit but be acceptable.

I notice in the parameters there is:

Device ID 64bit unique ID for each unit. DEVICEID[0] DEVICEID[1]

Device address bit 64bit. DEVICEADDR[0] DEVICEADDR[1]

I cant think of a mathematical method of reducing the number of bits and presume there isnt a way (64bit to 24bit or 32bit)?

I presume the DEVICEID is unique for every chip? Unless the device ID is made of different fields that can be split?

[Ole Morten]

No ID in the chip is guaranteed to be unique, as they are all randomly generated in production of the chip. If you need a value that's guaranteed to be unique, this is hence something you'll have to do yourself in your own production flow.

You may also have use in taking a look at this question.

[Tom]

No ID in the chip is guaranteed to be unique, as they are all randomly generated in production of the chip.

If true uniqueness is required, writing a unique serial number (or similar) to a constant or NVM and recompiling for each unit is a possible solution. But this is time consuming for large quantities. Any other suggestions? We are considering using uVision5 to program.